What you can make a cyanotype on: paper, fabric, wood and more
- Reviewed
- Reading time
- 13 min
- Sources
- 19
As an Amazon Associate I earn from qualifying purchases. How we are funded
In short
- Jacquard accepts any natural fiber or porous surface: cotton, linen, silk, canvas, wood, paper and leather.
- The blue doesn’t form a layer on top: it coats the fibers of the surface, so the surface has to be absorbent.
- The common problem is alkalinity: Prussian blue breaks down in contact with alkaline materials.
- For paper, Ware calls for papers without a calcium carbonate alkaline buffer and with enough weight.
- Glass takes cyanotype over a gelatin layer; for ceramics there is no verified method.
- Cyanotype is transparent: the color of the surface adds to the blue.
On this page (11 sections)
- What surfaces can you make a cyanotype on?
- Why the surface has to be absorbent
- The common problem: alkalinity
- Paper: the reference surface
- Sizing: when it changes the surface
- Fabric and canvas: textile surfaces
- Wood, cardboard, stone and leather
- Can you make a cyanotype on ceramics or glass?
- The color of the surface matters
- How to test a new surface
- Safety: the solution stains anything that absorbs it
What surfaces can you make a cyanotype on?#
You can make a cyanotype on any natural, porous surface. Jacquard accepts any natural fiber or porous surface for its sensitizer: cotton, linen, silk, canvas, wood, paper and leather1. Mike Ware notes that the solution can also be applied to fabrics and other surfaces2. Paper is still the usual surface.
Gil-Segovia, in her study of cyanotype in contemporary art, sums it up like this: it is normally used on paper, although it can also be used on wood, fabric and even glass3. In workshops with artists, Mendez and Lopez-Leon also coated cardboard and stone with it4. That a surface is possible, however, doesn’t mean there is a published method for preparing it.
Learn more: what you need to start with cyanotype, with the paper and the fabric each technique takes.
This table sorts the surfaces by what the sources say: which have a documented method, which are only mentioned, and which don’t work.
| Support | What the sources say | What to watch for |
|---|---|---|
| Paper | The usual surface3; Ware gives criteria for alkaline buffer and weight2 | No alkaline buffer; enough weight |
| Natural-fiber fabric | Accepted by Jacquard and by Ware5 | Natural fiber; gentle washing of the finished piece |
| Canvas | Jacquard includes canvas among its surfaces1 | Raw: there are no sources on primed canvas |
| Wood | Accepted by Jacquard; used in workshops4 | Raw: treated wood makes the process much harder |
| Cardboard and stone | Used in workshops, no published method4 | Test first; alkaline buffer in cardboard |
| Leather | Accepted by Jacquard, no published method1 | Test first on an offcut |
| Ceramics | Studied in a peer-reviewed article we haven’t been able to read6; according to another, it is based on gelatin7 | No verified method |
| Glass | Documented method over a gelatin layer7 | Clean glass, dried in the dark and a short rinse |
| Polyester and synthetic fibers | Generally doesn’t work, because it isn’t a natural fiber5 | We don’t recommend it |
Learn more: what paper to use for cyanotype, the surface with the most sources and criteria.
Why the surface has to be absorbent#
The surface has to be absorbent because cyanotype doesn’t form a layer on top. There is no emulsion layer or baryta layer, as in other photographic processes: the Prussian blue particles coat the fibers of the paper itself8. If the solution doesn’t get into the surface, the pigment has nowhere to stay.
A recent study on cotton paper goes further. Sentoku and colleagues found particles of 20 to 100 nanometers on the surface of the fiber and 20 to 50 inside it, and suggest that they are Prussian blue formed within the fiber9. The authors present this as a possibility, not a certainty, but it helps explain why a cyanotype doesn’t rub off on your hands once it’s washed.
Having no layer has an advantage: the surface keeps its texture. On fabric, Bilvar, citing Ware, explains that iron processes are considered the most suitable for delicate textiles because they don’t need a binder such as gelatin or gum, which would alter the drape10. Paper and fabric keep their texture and feel.
Learn more: sizing for cyanotype, the treatment that changes how much a surface absorbs.
The common problem: alkalinity#
Whatever the surface, what harms a cyanotype most is alkalinity. Prussian blue holds up well in neutral or acidic conditions, but alkaline materials break it down quickly8, and in an alkaline or buffered environment a cyanotype loses detail and density11.
pH is the scale that tells you whether something is acidic or alkaline, with 7 as the neutral point. Mike Ware explains that any substance with a pH above 7 bleaches a cyanotype12. That alkali can arrive by many routes, and each surface has its own:
- In paper, the calcium carbonate alkaline buffer, which Ware says to avoid2.
- In fabric, detergents with phosphates and alkaline media, which according to Jacquard can yellow the image5.
- On the print, high-pH paints or dyes, which can weaken the blue or make it disappear5.
- In the rinse, alkaline or very hard water, which according to Ware degrades the image13.
Learn more: cyanotype and alkaline materials, with papers, boards and detergents.
Paper: the reference surface#
Paper is the surface with the most sources. Mike Ware calls for papers without a calcium carbonate alkaline buffer and, so they don’t cockle when wet, about 160 g/m² up to A4 and 240 g/m² or more for larger sizes2. Among the papers the sources cite for cyanotype are cotton papers such as Hahnemühle Platinum Rag14.
The trap is in the label: “acid-free” doesn’t mean “no alkaline buffer,” and a paper can be acid-free and still be buffered15. In addition, Ware warns that manufacturers can change a paper’s composition without notice16, so it’s worth testing each new batch. If you already know what type you want, the buying guide is paper for cyanotype.
Learn more: what paper to use for cyanotype, with the paper table and how to read the label.
Sizing: when it changes the surface#
Sizing is the treatment that controls how much a surface absorbs, and on paper you almost never need to add it. The alternative photography course at the University of Guanajuato explains that paper can be sized with starch, albumen or gelatin, but that it isn’t necessary, and gives a gelatin recipe for unbleached muslin, unbleached cotton17.
Sizing also decides whether a wetting agent, the additive that helps the surface absorb, is a good idea. Ware explains that hard-sized papers coat better with it, but that Tween can react badly with gelatin-sized papers2.
Learn more: sizing for cyanotype, with the step-by-step recipe and what we haven’t been able to confirm.
Fabric and canvas: textile surfaces#
Fabric is the second best-documented surface. Jacquard lists silk, cotton, wool, hemp, linen and canvas as possible fibers5, and explains that polyester, since it isn’t a natural fiber, generally doesn’t work5. The process is the same as for paper, with two differences: fabric uses more solution1 and the finished piece needs very gentle washing5.
Artist’s canvas is cotton or linen duck, and belongs to the same family1. We haven’t found sources on cyanotype on pre-primed canvas, so the advisable approach is to work on raw canvas and stretch it on the frame at the end. The whole textile process, with T-shirts, bags and scarves, is in cyanotype on fabric.
Learn more: cyanotype on canvas, from raw fabric to stretcher.
Wood, cardboard, stone and leather#
Wood, cardboard, stone and leather are possible surfaces, but poorly documented. Jacquard accepts wood and leather1, and Mendez and Lopez-Leon coated wood, cardboard and stone in their workshops4, but none of these sources gives a procedure for preparing the surface.
There is one sourced warning: Mendez and Lopez-Leon explain that cyanotype on treated wood is very complicated, because the varnishes and solvents that seal the surface can react badly with the solution4. In one of their pieces they chose to print on cotton paper and then incorporate it into the wooden piece4. With these surfaces, the rule is raw wood or cardboard and a test on an offcut first.
Learn more: cyanotype on wood, with the step-by-step test and the mounted-paper alternative.
Can you make a cyanotype on ceramics or glass?#
On glass, yes, over a gelatin layer that holds the solution; on ceramics the basis seems to be the same, but we don’t have a complete verified method. For glass there is a procedure documented in a 2023 peer-reviewed article by Çaygür and Böcekler7, with two ways of preparing the plate and the tests that refined them.
The underlying reason is absorption: if the pigment lodges in the fibers of the surface8, a smooth surface such as a glaze or glass needs a layer to hold the solution, and the one the sources describe is gelatin9. The recipe going around, with gelatin hardened with chrome alum, we haven’t found in reliable sources. In one of their tests, Çaygür and Böcekler used another hardener, aluminum potassium sulfate, and their final method does without it7.
Ceramics are studied in a peer-reviewed article from Anadolu University, by Erel and Kahraman6, which we haven’t been able to read. What we know is secondhand: according to Çaygür and Böcekler, that method starts from 2 g of 250 bloom gelatin per 20 ml of water and calls for waiting at least 7 days7. We don’t know what kind of ceramic it works on, glazed or not, or what the wait refers to, so we don’t give a recipe for ceramics.
To put a cyanotype image on a mug or a tile, Hu describes a documented route: scan it and print it onto the ceramic by digital printing or heat transfer18. The result reproduces the look of the blue, but it’s no longer a cyanotype. We also don’t suggest cyanotype for mugs, plates or other objects that touch food (we explain why at the end of this page).
Learn more: cyanotype on glass, with the two methods, the step by step and the most common failures.
The color of the surface matters#
The color of the surface adds to the blue, because cyanotype is transparent. Jacquard explains it by comparing it to a dye: on a yellow background it comes out green, on a red one it comes out purple, and on a black background the image doesn’t show5. This applies to fabric and to paper, including newsprint or a book page.
It’s a creative tool, not a flaw. Printed paper, a map or striped fabric still show through the image5, and light-colored wood lets its grain show under the blue. If you’re after the classic contrast of white silhouettes on Prussian blue, the surface has to be white or natural.
Learn more: which fabric works for cyanotype, with colored and printed fabrics.
How to test a new surface#
For almost any surface other than paper and fabric, you have to run a test, because there are no sources. Mike Ware suggests one for paper that serves as a model: coat a scrap and keep it in the dark, because if the yellow coating turns green or blue in the dark, the surface has impurities2.
A full test has four steps, and is done on a scrap of the same material you’re going to use:
- Coat a scrap with the same solution and the same tool you’ll use on the piece, and let it dry in the dark.
- Check whether it stays yellow after a few hours: if it turns green or blue without light, discard that surface or that batch.
- Expose a test strip with an object on top, covering sections with a piece of card stock, and rinse it until the water runs clear.
- Observe the dry result for a few days: whether the blue holds, whether the surface has warped, whether the surface has changed.
How to spread the solution evenly, with a brush or a rod, is explained in how to coat paper for cyanotype.
Safety: the solution stains anything that absorbs it#
Cyanotype solution works on any porous surface, including your clothes, the table or the wood in your studio, and ferric ammonium citrate irritates the skin according to the Jacquard data sheet19. Work with nitrile gloves, eye protection and a covered table, and remember that large pieces call for more solution and more rinse water.
Before coating an object, think about how it will be used: we haven’t found data on chemical residues in objects that touch food, such as cutting boards, plates or mugs, so we don’t suggest them. All the details are in skin, clothing and other surfaces.
In this chapter
- What paper to use for cyanotype: fiber, weight and alkaline bufferCotton paper, no alkaline buffer and enough weight: why “acid-free” isn’t enough, which papers the sources cite and how to test a new one.
- Sizing paper and fabric for cyanotype: when you need itWhat sizing is, why paper almost never needs it, what Mike Ware says about wetting agents, and the teaching recipe with gelatin for unbleached cotton.
- Cyanotype on wood: which wood to use and how to do your first testWood takes cyanotype, but there is no published recipe for preparing it: why to avoid varnished wood, how to test on an offcut and what the alternative is.
- Cyanotype on glass: how to hold the emulsion with gelatinHow to make a cyanotype on glass with a gelatin layer: the two documented methods, the step by step, the most common failures and how to avoid them.
Frequently asked questions
What’s the easiest surface for getting started with cyanotype?
Paper. It’s the surface with the most sources, from weight to alkaline buffer, and the one that gives the fewest surprises in the water. A cotton watercolor paper without an alkaline buffer, or ready-made cyanotype paper if you don’t want to mix chemistry, is the safest starting point. Fabric is the next step.
Can you make a cyanotype on cardboard?
It has been done: in their workshops, Mendez and Lopez-Leon coated cardboard, wood and stone with the solution, among other recycled materials. They don’t give a preparation method, so it’s best to test on a scrap of the same cardboard. Also check whether the cardboard has an alkaline buffer, which harms the blue.
Can you make a cyanotype on leather?
Leather is among the natural surfaces Jacquard accepts for its sensitizer. We haven’t found sources with a procedure for leather or data on how it behaves in the rinse, so treat it as a possible surface that calls for a test on an offcut first.
Can you make a cyanotype on plastic or metal?
We don’t recommend it. The sources we consulted always refer to natural fibers and porous surfaces, and Jacquard explains that polyester, since it isn’t a natural fiber, generally doesn’t work. We haven’t found any reliable source on plastics or metals as a surface for cyanotype.
Can you make a cyanotype on colored fabric or paper?
Yes, but the background color adds to the blue, because cyanotype is transparent, like a dye. According to Jacquard, on yellow it comes out green, on red it comes out purple, and on black it doesn’t show. Prints and printed papers also show through the image.
Your next step
Choose the paper for your first cyanotype
Cotton paper, unbuffered and heavy enough: why “acid-free” isn’t enough, which papers the sources cite and how to test a new one.
Go to the next step: Choose the paper for your first cyanotypeSources
- Jacquard Products. (n.d.). Cyanotype sensitizer set [Product page]. https://www.jacquardproducts.com/cyanotype-set Accessed October 16, 2026. 123456
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 123456
- Gil-Segovia, J. A. (2022). La cianotipia como recurso en el arte contemporáneo: una luz azul que no se apaga. Arte, Individuo y Sociedad, 34(1), 167–186. https://doi.org/10.5209/aris.73063 12
- Mendez, A. and Lopez-Leon, R. (2023). Creativity and cyanotype: Exploring camera-less photography as an alternative for art education. Arts & Communication, 1(2), Article 1453. https://doi.org/10.36922/ac.1453 123456
- Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 123456789
- Erel, E. B. and Kahraman, D. (2020). Seramik yüzeylerde cyanotype baskı yöntemi [Printing method of cyanotype on ceramic surfaces]. Sosyal Bilimler Dergisi (SOBİDER), 45, 385-399. https://doi.org/10.29228/sobider.42138 12
- Çaygür, B. and Böcekler, B. (2023). Cyanotype baskı yönteminin cam yüzey üzerine uygulanması: “Ayna” projesi örneği [Applying cyanotype printing to glass: the case of the “Mirror” project]. Akademik Sanat, (20), 90-106. https://dergipark.org.tr/tr/pub/akademiksanat/article/1325204 12345
- Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf 123
- Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018 12
- Bilvar, H. (2025). Fotoğraf ve tekstilin kesişiminde siyanotip (cyanotype) baskı: Gelenekten geleceğe tekstil ve sanattaki rolü [Cyanotype printing at the intersection of photography and textiles: Its role in textiles and art, from tradition to the future]. Bodrum Journal of Art and Design, 4(1), 94–108. https://doi.org/10.58850/bodrum.1603461
- Vogt-O'Connor, D. (1995). Caring for blueprints and cyanotypes (Conserve O Gram 19/9). National Park Service, Curatorial Services Division. https://www.nps.gov/subjects/museums/upload/19-09_508.pdf Accessed October 16, 2026.
- Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
- Hahnemühle. (n.d.). Platinum Rag: Uncoated FineArt paper for platinum printing & other alternative processes [Product page]. https://www.hahnemuehle.com/en/stationery/finenotes/p/Product/show/241/810.html Accessed October 16, 2026.
- Northeast Document Conservation Center. (2018). Storage enclosures for photographic materials (Preservation Leaflet 5.6). https://www.nedcc.org/free-resources/preservation-leaflets/5.-photographs/5.6-storage-enclosures-for-photographic-materials Accessed October 17, 2026.
- Ware, M. (1995). A handmade paper for alternative processes. Ag+ Photographic, (7), 34-39. Reproduced at https://www.mikeware.co.uk/pages/main/technical/Alternative_Printing.html
- Universidad de Guanajuato. (2022, February 8). Clase digital 11: Introducción a la fórmula y materiales y preparación de soportes y sustratos. Recursos Educativos Abiertos (UDA Fotografía alternativa, Licenciatura en Artes Visuales). https://blogs.ugto.mx/rea/?p=528 Accessed October 16, 2026.
- Hu, L. (2022). Design and application of cyanotype technology in cultural and creative products. BCP Social Sciences & Humanities, 18, 194-198. (supporting source)
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026.
Reviewed on October 18, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 18). What you can make a cyanotype on: paper, fabric, wood and more. https://cyanocodex.com/en/surfaces/
