Skip to content
The Cyano Codex
Choose language

Toning cyanotypes: how to change the blue

Toning is a bath that changes the color of a finished cyanotype: from Prussian blue to browns, blacks, violets or greens. The classic method has two steps, bleaching with an alkali and dyeing with tannins, and each recipe uses products with their own safety data sheet. Here’s how it works, what is known and what isn’t.
Reviewed
Reading time
10 min
Sources
16

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Cyanotype half-toned in a tray of tea, blue on one side and violet-brown on the other
Plate 1The blue changes color in the tea bath.

In short

  • Classic toning bleaches the print in an alkaline bath and then dyes it with tannic or gallic acid.
  • The alkali breaks down the Prussian blue: what remains is a faint, yellowish image that the tannin darkens.
  • Tea and coffee also tone cyanotypes, toward sepia tones.
  • Lead and nickel toners exist, but they aren’t recommended because of their toxicity.
  • We haven’t found reliable sources on how long a tannin-toned print lasts: care for it as you would a blue one.
  • Each bath has its own safety data sheet: sodium carbonate, for example, irritates the eyes.
On this page (11 sections)
  1. What is cyanotype toning?
  2. How does classic toning work?
  3. Types of toning and what is known about each
  4. Bleaching before toning
  5. Dyeing with tannins: tannic acid, plants and wine
  6. Toning with tea or coffee
  7. Beyond sepia: violets, greens and blacks
  8. Is a toned cyanotype permanent?
  9. How to plan your toning tests
  10. Safety in toning
  11. Learn more: published books

What is cyanotype toning?#

Cyanotype toning is a treatment that changes the color of a finished print without remaking it. It transforms the Prussian blue to shift it to other tones, such as browns, blacks, violets or greens1. Toned cyanotypes are listed as a recognized variant of the process in the Image Permanence Institute’s Graphics Atlas2.

The bath itself is called a toner. Toning is one of the variants of cyanotype, and it always starts from a finished, well-washed print: the paper, the solution and the exposure are the usual ones.

It isn’t a new idea. In the 19th and early 20th centuries, cyanotypes were already being toned to various colors1. The chemist John Mercer (1791–1866) developed mordant toning1, which uses the iron in the image to fix a dye3.

How does classic toning work?#

Classic toning to black or brown has two steps. First, the cyanotype is bleached in an alkaline bath, such as ammonia. Then it is dyed in a solution of tannic or gallic acid, which forms a dark compound with the iron, an iron tannate or gallate1,3.

Bleaching exploits cyanotype’s weak point: any alkaline substance breaks down Prussian blue4. The blue disappears, leaving a faint, yellowish iron oxide image, which is what then takes on color in the tannin bath4. It’s the same damage you avoid when preserving a print; here it’s caused on purpose.

Classic toning, in two bathsThree boxes joined by arrows. 1. Finished cyanotype, in Prussian blue. Arrow: alkaline bath, ammonia. 2. Very pale yellow box with the image barely visible: the alkali breaks Prussian blue down into hydrated iron oxide and leaves a faint, yellowish image. Arrow: tannic or gallic acid. 3. Dark brown box: the iron forms a dark compound with the tannin, iron tannate or gallate. Note: bleaching can’t be undone.1Finished cyanotypePrussian bluealkaline bath (ammonia)2Faint, yellowish imagethe alkali breaks Prussian blue down into iron oxideiron oxidetannic or gallic acid3Dark imageiron and tannin forma dark compound: irontannate or gallateBleaching can’t be undone. Classic toning, in two baths1Finished cyanotypePrussian bluealkaline bath (ammonia)2Faint, yellowish imagethe alkali breaks Prussianblue down into iron oxideiron oxidetannic or gallic acid3Dark imageiron and tannin form adark compound: irontannate or gallateBleaching can’t be undone.
Diagram 1Classic toning, in two baths. Toning first removes the blue with an alkali and then dyes the remaining iron with tannin.

Chemical analysis confirms it: in a cyanotype toned black, the iron and the cyano bond of Prussian blue are still present1. Toning transforms the image; it doesn’t replace it with another.

Types of toning and what is known about each#

There are many kinds of toning, but not all have the same backing. The table sorts them by what we’ve been able to verify, from recipes with quantities to those cited only as history.

Swipe to see more columns

Types of toning and what is known about each
Toning Tone What the sources say Our position Source
Tannic acid after bleaching with ammonia Brown to black Museum recipe with quantities, no times Can be done, with its safety data sheet 5
Gallic acid after bleaching with ammonia Purple or lilac Museum recipe with unclear concentrations With caution 5
Cold borax Violet cast No published concentration No recipe 5
Tea or coffee Sepia Used in workshops; quantities unverified Sources pending 6
Plants Variable A published book exists; method unverified Sources pending 7
Lead acetate Violet Ware rules it out because of its toxicity No 4
Nickel salts Greenish blue Recognized carcinogens, according to Ware No 8
19th-century recipes Green, bluish lilac, warm black Only as history No 1

Bleaching before toning#

Bleaching means removing the blue with an alkaline bath so the image is ready for dyeing. The National Science and Media Museum does it with ammonium hydroxide, that is, ammonia in solution5. The speed depends on how alkaline the bath is: in a test cited by Ware, a sodium carbonate solution at pH 10.7 destroyed the blue in under half a minute4.

What is bleached doesn’t come back: Ware explains that alkaline damage becomes irreversible as the iron oxide it leaves behind ages4. That’s why it’s best to test first on a print you don’t mind losing, and never on an old piece: Ware advises against even washing one with plain water4.

Learn more: bleaching a cyanotype, step by step.

Dyeing with tannins: tannic acid, plants and wine#

The second bath is the one that gives the color. For brown or black, the Bradford museum tones with 10 g of tannic acid in 500 ml of distilled water, after bleaching with ammonia5. Tannic acid is a tannin, one of a family of plant-derived substances that form dark compounds with iron1.

You can also tone with plants: Annette Golaz devoted a published book to it, Cyanotype toning: Using botanicals to tone blueprints naturally (Routledge, 2021)7. We haven’t been able to consult it, so we don’t give its method or quantities. For toning with wine, we haven’t found any reliable source.

Learn more: tannin toning, with the museum’s recipe and its limitations.

Toning with tea or coffee#

Tea and coffee also tone cyanotypes, toward sepia tones. The manufacturer Jacquard describes it9, it’s used in educational workshops6 and Mike Ware devotes a section of his Cyanomicon to it3.

What we don’t have yet are verified quantities and times. The ones going around come from blogs and forums, and we haven’t been able to consult the reference sources that cover them. We’d rather not publish an unsupported recipe while we finish the pages on tea toning and coffee toning.

Beyond sepia: violets, greens and blacks#

Toning doesn’t stop at brown. The Bradford museum gets purples and lilacs with gallic acid after bleaching, and a violet cast with a cold borax bath5. In the 19th century, greens were achieved with acidified iron(II) sulfate and bluish lilacs with potassium sulfocyanide1, recipes we don’t recommend today.

There’s another route to color that isn’t toning. Cyanotype is transparent, like a dye, and on yellow paper it comes out green and on red paper, purple9. Both routes, with their limitations, are covered in colored cyanotype.

Is a toned cyanotype permanent?#

We don’t know for certain. Variants and toners can change the tone and also the stability of the print10. Ware has measured only two cases: lead makes it roughly four times more resistant to light, and nickel makes it more resistant to alkalis4. For the rest, there’s no reliable data.

It’s often said that tannin-toned prints are permanent, or more stable than blue ones. We haven’t found this in any conservation source, so the safe approach is to care for a toned print as you would a blue cyanotype: away from the sun, away from alkalis and away from water. How to do that is explained in how to preserve a cyanotype.

How to plan your toning tests#

Toning can’t be undone, so it’s best to rehearse before touching your good print. Make several identical prints of the same subject, on the same paper and with the same exposure, and cut some into strips. Each strip can test a different bath or time without using up a whole sheet.

Write down what you do with each strip, from the bath to the minutes, and let the tests dry before comparing them: in cyanotype, the color keeps changing as it dries11. After two or three sessions you’ll have your own tone chart, made with your paper, your water and your light.

Safety in toning#

Each toner uses different products, each with its own safety data sheet, and it’s best to read it before you open the container. Sodium carbonate, for example, irritates the eyes and reacts strongly with acids, giving off heat12.

Safety: Sodium carbonate baths irritate the eyes: wear safety glasses, and rinse the tray before moving on to an acid bath. More on safety

Keep ammonia and acids away from the powdered chemicals and the sensitizer: the Sigma-Aldrich safety data sheet for potassium ferricyanide lists them among the substances that pose a risk of explosion or of releasing toxic gases13. And leave metal toners out: Ware describes lead acetate as a seriously toxic heavy-metal salt and points out that nickel salts are recognized carcinogens8.

For leftovers, the safety data sheets for sodium carbonate disagree: one allows small amounts to be diluted with plenty of water and another says it must not enter the sewer system14,12. When in doubt, keep the bath in a labeled container and take it to your local hazardous waste collection point15. Product by product, in safety in toning and other formulas.

Learn more: published books#

To go beyond what we’ve been able to verify, there are published manuals, in English. Cyanotype: The Blueprint in Contemporary Practice, by Christina Z. Anderson (Focal Press, 2019), devotes an entire chapter to toning16. We haven’t consulted it, so we don’t attribute any facts to it on this page.

The other title in our selection, more focused on creative techniques, is Creative Cyanotype, by Angela Chalmers; its box is further up, next to the other colors. And for toning with plants, the dedicated work is Golaz’s, cited above.

In this chapter

Frequently asked questions

Do you have to bleach a cyanotype before toning it?

For classic tannin toning, yes: first the print is bleached in an alkaline bath and then dyed with tannic or gallic acid. For tea and coffee, recipes circulate both with and without prior bleaching, but we haven’t been able to verify them in reliable sources, so we don’t give a definitive answer for those.

What is a toner?

It’s the toning bath, the one that changes the color of a finished cyanotype; in Spanish it goes by several names, including entonador and virador. The best known is the tannic acid toner, which, after alkaline bleaching, shifts the blue toward brown or black, according to the National Science and Media Museum’s recipe.

Can you tone an old cyanotype?

It’s not advisable. Toning requires wetting the print and treating it with alkalis, and Mike Ware advises against even washing an old cyanotype with plain water, because of the risk of losing image. Also, bleaching can’t be undone. If you want to see an old piece in another tone, tone a reproduction, never the original.

What color does tea toning give?

Sepia tones, according to the sources that describe the technique. The exact shade varies with the recipe, and we don’t yet have verified data for quantities and times. That’s why it’s best to test first with cuttings from a single print before toning the one you care about.

Your next step

Bleach your first print for toning

How to bleach a cyanotype for toning: what the alkaline bath does, a museum’s ammonia recipe, when to stop and how to work safely.

Go to the next step: Bleach your first print for toning

Sources

  1. Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf 12345678
  2. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype Accessed October 17, 2026.
  3. Ware, M. (2014). Cyanomicon: History, science and art of cyanotype: Photographic printing in Prussian blue (rev. and expanded ed.). https://www.mikeware.co.uk/mikeware/downloads.html 123
  4. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2–18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 1234567
  5. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026. 123456
  6. Mendez, A. and Lopez-Leon, R. (2023). Creativity and cyanotype: Exploring camera-less photography as an alternative for art education. Arts & Communication, 1(2), Article 1453. https://doi.org/10.36922/ac.1453 12
  7. Golaz, A. (2021). Cyanotype toning: Using botanicals to tone blueprints naturally. Routledge. https://www.routledge.com/Contemporary-Practices-in-Alternative-Process-Photography/book-series/CPAPP 12
  8. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12
  9. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 12
  10. Tirak, L. M. (2021). Black and blue: Revelations in Harold Mahoney's X-rayed anatomical sections. The Rijksmuseum Bulletin, 69(1), 27–49. https://doi.org/10.52476/trb.9603
  11. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
  12. Th. Geyer GmbH & Co. KG. (2022). Safety data sheet: Sodium carbonate (version 4, art. 1393). https://pdf.dutscher.com/doc/1393-1KG-KIS/1393-1KG-KIS_FDS.pdf. Accessed October 16, 2026. 12
  13. Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026.
  14. Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Soda ash (sodium carbonate) [component of the Procion MX dye 4 color set]. https://www.jerrysartarama.com/media/pdfs/jacquard/procion-dye-4-color-set-soda-ash-SDS-2021.pdf. Accessed October 16, 2026.
  15. Administración General del Estado. (2026). Eliminación de residuos domésticos. Punto de Acceso General (administracion.gob.es). https://administracion.gob.es/pag_Home/Tu-espacio-europeo/derechos-obligaciones/ciudadanos/consumidores/conexion-servicios/residuos.html Accessed October 16, 2026.
  16. Anderson, C. Z. (2019). Cyanotype: The blueprint in contemporary practice. Routledge. https://www.routledge.com/products/9781138338845

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.

How to cite this page

The Cyano Codex. (2026, October 16). Toning cyanotypes: how to change the blue. https://cyanocodex.com/en/toning/