Skip to content
The Cyano Codex
Choose language

Transparency film for cyanotype: inkjet or laser

To print cyanotype negatives, choose transparency film by your printer: inkjet film has one side treated to take the ink and doesn’t work in a laser printer, and laser film withstands the heat and doesn’t work in an inkjet. After that come the size, A4 or letter, and which side you print on.
Section
Materials
Reviewed
Reading time
7 min
Sources
10

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Some links on this page go to Amazon. If you buy through them, we earn a commission and the price you pay doesn’t change. We choose the types of material on technical grounds, and the details for each product come from the manufacturer.

Sheets of clear acetate fanned out, the top one printed with a fern negative
Plate 1Transparency film for negatives.

In short

  • Your printer decides: inkjet or laser transparency film, never the other way around.
  • The negative is the same size as the print: cyanotype is a contact print, with no enlarging.
  • The negative is printed inverted and mirrored, with the printed side against the coated paper.
  • In the inkjet printers tested, yellow blocks a lot of ultraviolet and adds density.
  • The classic formula reproduces short-range negatives well: 1 to 1.2, according to Ware.

The selection at a glance

The selection compared by use (no scores)
ProductWho it’s forWhat’s included, according to the manufacturerYieldA4 equivalent (our calculation)Link
Uinkit inkjet transparency film (50 sheets, Letter)For inkjet printers50 sheets, 8.5 × 11 in, 5 mil thick according to the package, coated on one side, for inkjet printers.See current price on Amazon: Uinkit inkjet transparency film (50 sheets, Letter) (opens in a new tab) Affiliate link
Uinkit laser transparency film (100 sheets, Letter)For laser printers100 sheets of 8.5 × 11 in, 4 mil PET film for laser printers and copiers, printable on both sides, with paper interleaves.See current price on Amazon: Uinkit laser transparency film (100 sheets, Letter) (opens in a new tab) Affiliate link

Specifications as stated by each manufacturer. The A4 equivalent is our own calculation.

How we made this selection

We haven’t tested these products and we don’t score them. We select them using data that can be checked: what the manufacturer states (composition, quantities, dimensions, standards), what the technical literature says about each material, and whether they are on sale on Amazon on the review date. We sort them by use, not by quality. Commission plays no part in the criteria. If a product stops meeting them, it comes out of the guide.

How we work · Selection reviewed in October 2026

On this page (8 sections)
  1. Who each film is for, and who it isn’t for
  2. Which transparency film to buy for cyanotype?
  3. What to check in a transparency film listing
  4. The ink matters too
  5. What about special films for digital negatives?
  6. What if you don’t have a printer?
  7. How to protect the negative
  8. If none of these fit

The selection, product by product

Uinkit inkjet transparency film (50 sheets, Letter): for inkjet printers

Uinkit laser transparency film (100 sheets, Letter): for laser printers

Who each film is for, and who it isn’t for#

The transparency films in this selection differ in only one thing that matters: the type of printer they’re made for. One is for inkjet and the other for laser printers and photocopiers. Choosing wrong can’t be fixed: the ink won’t set or the sheet can’t take the heat. The table helps you get it right.

This guide is part of what you need to make a cyanotype. An inkjet format in small packs is left out of this selection while we review its product reference. The data for each product are what its manufacturer states; we haven’t tested them.

Who each transparency film in the selection is for
Transparency film Who it’s for Who it isn’t for What you need to know
Uinkit inkjet transparency film Anyone who prints with an inkjet printer and wants sheets for tests and series Anyone with a laser printer Inkjet only; Letter format
Uinkit laser transparency film Anyone who prints with a laser or takes negatives to a copy shop Anyone with an inkjet printer Doesn’t work for inkjet; Letter format

Which transparency film to buy for cyanotype?#

Buy the transparency film that matches your printer. Inkjet films have a treated side that holds the ink; laser films withstand the heat of printing. Both work, because the negative only has to block ultraviolet where there’s ink or toner and let it through where there isn’t.

A digital negative is a digital or scanned image, processed in editing software and printed on transparency film, and today it’s probably the most common way to make negatives for cyanotype1. For its chemistry, Jacquard specifies a black-and-white photo, inverted and printed on transparency film with an inkjet printer2. The full steps are in how to make a negative for cyanotype.

In stores they may be called acetate, transparency, film positive or film. The name doesn’t matter: what matters is the type of printer stated in the listing.

What to check in a transparency film listing#

In a listing for negative transparency film, check four things: which printer it’s for, the size, which side you print on and how many sheets it has. Some listings give the thickness, but we haven’t found reliable sources linking it to the result of the print, so it isn’t a criterion in this guide.

  1. Printer type. Inkjet or laser. It’s the only deal-breaker.
  2. Size. The negative has to be the same size as the print, because cyanotype has low light sensitivity and is printed by contact, not by enlargement1. Buy the size of your paper and your printer: A4 is 210 × 297 mm and letter is 215.9 × 279.4 mm3.
  3. Printing side. On inkjet films, the manufacturer tells you which side is treated for the ink. Print on that side.
  4. Number of sheets. Tests use up sheets: a step wedge, several strips and the occasional reprinted negative. Plan on more than you think.

The negative is printed inverted, from positive to negative, and flipped as a mirror image. That way the printed side goes against the coated side of the paper and the image doesn’t come out reversed4. If you use the Digital Negative Maker, it does this for you and exports at full size.

The ink matters too#

The transparency is just the support: what blocks ultraviolet is the ink, and not all inks block it equally. In the inkjet printers tested by Reeder and Anderson, yellow is the strongest ultraviolet absorber after photo black, and adding yellow makes the negative denser to ultraviolet and more contrasty4. These data are for Epson printers and may not hold for other inks.

The negative’s response also depends on the lamp’s spectrum, the type of transparency film, and the color and composition of the inks5. That’s why a digital negative needs a correction curve, made from a step wedge that is printed, exposed and measured for each combination of process, paper and printer6. If you change transparency film, redo the step wedge.

The formula also calls for its own negative. According to Ware, the traditional formula only reproduces negatives well with a density range of 1 to 1.2, while his New Cyanotype handles 1.8 to 2.47,8. Density measures how much light each area of the negative blocks, on a logarithmic scale9. How to adjust the image to your formula is in the digital negative curve.

What about special films for digital negatives?#

Some films are sold specifically for digital negatives. We haven’t found manufacturer data sheets or reliable studies comparing their ultraviolet density with that of ordinary transparency film, so we can’t say how much they improve the print. To start, an office transparency film of the right type for your printer is enough.

If you want to fine-tune later, the path the sources suggest runs less through the film than through calibration: your own step wedge and curve for your paper, your printer and your light6.

What if you don’t have a printer?#

Without a printer you have two routes: take the finished negative file to a copy shop that prints on transparency film, or draw it by hand. At the copy shop, ask them to print at actual size with no fit-to-page scaling. Photocopies on acetate have been discouraged for quality negatives, although the machines have improved a lot since then1.

Drawing the negative takes nothing more than a transparency, a permanent black marker or ink, and some patience: we explain it in hand-drawn negatives. For that use, an unprinted transparency or tracing paper works, because neither goes through a printer.

How to protect the negative#

The negative rests on the coated paper, and the chemistry can stain it. The Science and Media Museum recommends protecting it with a sheet of Mylar, a clear polyester, or plastic wrap10. That sheet is one more layer between the image and the paper: keep it clean and smooth.

Store negatives flat, in a folder, without touching the printed side with your fingers. A good negative serves for many prints, and every print needs the same contact: whatever marks the transparency shows up later in the blue.

If none of these fit#

If you’re looking for another size or another number of sheets, the search below opens the transparency films that come up on Amazon.com for “cyanotype.” In each listing, check the printer type first, then the size, A4 or letter, and finally the printing side the manufacturer specifies.

The shopping links on this page go to Amazon.com. If you shop elsewhere, search for inkjet transparency film or laser transparency film at your usual store. With the sheets at home, the next step is to prepare your first negative and print it at full size.

Frequently asked questions

Can transparency film be used for hand-drawn negatives?

Yes: an unprinted transparency works for drawing the negative with a permanent black marker or ink, and so does tracing paper, which is translucent. Since they don’t go through a printer, the type of transparency doesn’t matter. The step-by-step is on the hand-drawn negatives page.

Can I use laser transparency film in an inkjet printer?

No. Laser transparency film doesn’t have the coating that holds the ink, so the ink stays wet and smears. It doesn’t work the other way either: inkjet film isn’t made for the heat of a laser printer. Check the printer type in the listing before you buy.

Which side of inkjet transparency film do you print on?

On the side treated to take the ink, which the manufacturer indicates on the pack or in the listing. That printed side then goes against the coated paper, which is why the negative is printed mirrored: that way the image doesn’t come out reversed in the print.

What size transparency film do I need for cyanotype?

The size of your print, because cyanotype is printed by contact and the negative isn’t enlarged. If you’re going to expose at A4, print at A4; if your printer and paper are letter size, print at letter. Always print at 100%, without the fit-to-page option, so the negative comes out the size it should be.

Your next step

Prepare and print your first negativeHow to make a negative for cyanotype: convert the photo to black and white, adjust the curve, invert, flip and print on inkjet or laser film.

Sources

  1. Gil-Segovia, J. A. (2022). La cianotipia como recurso en el arte contemporáneo: una luz azul que no se apaga. Arte, Individuo y Sociedad, 34(1), 167-186. https://doi.org/10.5209/aris.73063 123
  2. Jacquard Products. (n.d.). Cyanotype sensitizer set [Product page]. https://www.jacquardproducts.com/cyanotype-set Accessed October 16, 2026.
  3. Brother. (n.d.). Tamaños de papel compatibles [Online user’s guide, Mexico/Latin America]. https://support.brother.com/g/s/id/htmldoc/mfc/cv_dcp220/mexlts/html/GUID-F4C0089F-FBD1-487D-8CAD-99DBFE75ADB5_1.html Accessed October 17, 2026.
  4. Reeder, R. and Anderson, C. Z. (2013). How to make digital negatives [Excerpt]. In C. Z. Anderson, Gum printing and other amazing contact printing processes. Reproduced on Freestyle Photographic Supplies. https://www.freestylephoto.com/alternative-process/making-digital-negatives 12
  5. Moseley, P. (2013, August 28–September 1). Manipulation of inkjet negative/positive transparencies to manage the image reflectance density, tonal gradation and contrast of photogravure, platinum, carbon transfer and other photographic contact printing processes [Conference paper]. Impact 8 International Printmaking Conference. https://uwe-repository.worktribe.com/output/929438
  6. Reeder, R. and Anderson, C. Z. (2020). Digital negatives with QuadToneRIP: Demystifying QTR for photographers and printmakers. Routledge. https://doi.org/10.4324/9781003017806 12
  7. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
  8. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026.
  9. International Union of Pure and Applied Chemistry. (2025). Absorbance, A; Decadic absorbance. In Compendium of chemical terminology (5th ed., online version 5.0.0). https://goldbook.iupac.org/terms/view/A00028 Accessed October 16, 2026.
  10. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026.

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.