Skip to content
The Cyano Codex
Choose language

Cyanotype Troubleshooter

The Troubleshooter takes you from what you see in your cyanotype to its most likely cause in a few questions. Each result gives you what to try, the full page on the problem and the sources behind it. When the sources don’t explain a case, it tells you so instead of inventing a fix.
Section
Tools
Reviewed
Sources
5
Several cyanotypes with different defects on a table, next to a magnifying glass
Plate 1What you see in the print tells you what happened.

What do you see in your print?

Choose the one closest to your case.

The image comes out light or pale

How did the print look when you took it out of the light, before washing?

All about this symptom: Why my cyanotype comes out pale

Not this? Go back to the previous question Start over

Most likely cause

Exposure too short

What to try

Lengthen the exposure; when in doubt, it’s better to overexpose than to underexpose. Make a test strip instead of relying on a published time.

The sources don’t fully agree. On the problem page you’ll see what each one says.

All about this problem: Why my cyanotype comes out pale

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype View source: ipi-sf-graphics-atlas

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

How long did you wash it?

Not this? Go back to the previous question Start over

Most likely cause

Overwashing: the water carries away some of the blue

What to try

Wash until the water runs clear and the greenish-yellow tint disappears, and no longer.

The sources don’t fully agree. On the problem page you’ll see what each one says.

All about this problem: Why my cyanotype comes out pale

Sources for this answer
  1. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ View source: nsmm-2011-introduction-cyanotype
  2. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf View source: jacquard-2019-cyanotype-faq
  3. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving
  4. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  5. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  6. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype View source: ipi-sf-graphics-atlas

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

The image washes away when rinsed

What water do you wash with?

All about this symptom: Why my cyanotype comes out pale

Not this? Go back to the previous question Start over

Most likely cause

Alkaline or hard water degrades the image

What to try

Give a first, very dilute acid bath before washing (Ware suggests 1-2% citric acid in the bath water) or use softer water.

Safety: Vinegar or citric acid go only diluted in the bath water; never add them to the powders or to the sensitizer of the classic formula. More on safety

All about this problem: Why my cyanotype comes out pale

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Which formula do you use?

Not this? Go back to the previous question Start over

Most likely cause

With the classic formula, a large part of the “soluble” blue goes off in the water

What to try

Overexpose more than seems necessary, or try Ware’s New Cyanotype, which loses much less in the wash.

All about this problem: Why my cyanotype comes out pale

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving
  3. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Probably underexposed

What to try

Lengthen the exposure and check with a test strip.

The sources don’t fully agree. On the problem page you’ll see what each one says.

All about this problem: Why my cyanotype comes out pale

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype View source: ipi-sf-graphics-atlas

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

It comes out yellow or greenish

When does the color appear?

All about this symptom: Why my cyanotype comes out yellow or greenish

Not this? Go back to the previous question Start over

Most likely cause

Insufficient washing: unexposed iron salts remain

What to try

Wash again until the tint is completely gone.

All about this problem: Why my cyanotype comes out yellow or greenish

Sources for this answer
  1. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ View source: nsmm-2011-introduction-cyanotype
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Contact with something alkaline: board or envelope with an alkaline reserve, detergent with phosphates, soap, high-pH paint

What to try

Move it to paper or board without an alkaline reserve and, if it’s fabric, hand-wash it cold with a phosphate-free detergent. Alkali damage can’t be undone.

All about this problem: Why my cyanotype comes out yellow or greenish

Learn more: Cyanotype and alkaline materials: papers, boards and detergents

Sources for this answer
  1. Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf View source: stulik-2013-atlas-cyanotype
  2. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving
  3. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf View source: jacquard-2019-cyanotype-faq
  4. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Stains

What are the stains like?

All about this symptom: Stains on cyanotypes: causes and remedies

Not this? Go back to the previous question Start over

Most likely cause

Contact with damp hands, sweat or skin oil

What to try

Handle the paper and the print with dry hands or gloves.

All about this problem: Stains on cyanotypes: causes and remedies

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf View source: jacquard-2019-cyanotype-faq

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Crystals formed by too much solution or by not filtering it

What to try

Apply less solution, without puddling, and filter the sensitizer.

All about this problem: Stains on cyanotypes: causes and remedies

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

No verified cause

We don’t have a verified cause for this case

The sources we have checked don’t explain this case with certainty, so we’d rather not give you a specific remedy. The problem page has everything that is verified.

All about this problem: Stains on cyanotypes: causes and remedies

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

The blue is weak (nothing’s wrong, I want more)

What have you already tried?

All about this symptom: How to get a deeper blue in cyanotype

Not this? Go back to the previous question Start over

Most likely cause

Room for improvement in exposure, coating and development

What to try

Full exposure, two coats of sensitizer and a first, very dilute acid bath (Ware suggests 1-2% citric acid in the bath water); avoid hard water.

Safety: Vinegar or citric acid go only diluted in the bath water; never add them to the powders or to the sensitizer of the classic formula. More on safety

All about this problem: How to get a deeper blue in cyanotype

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Hydrogen peroxide brings out the final blue sooner; sources disagree on whether it intensifies it

What to try

Use it as a shortcut to see the final result, not as a way to gain intensity.

Safety: Use only 3% drugstore hydrogen peroxide, in the bath water and away from your eyes. More on safety

The sources don’t fully agree. On the problem page you’ll see what each one says.

All about this problem: How to get a deeper blue in cyanotype

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ View source: nsmm-2011-introduction-cyanotype
  3. Tirak, L. M. (2021). Black and blue: Revelations in Harold Mahoney's X-rayed anatomical sections. The Rijksmuseum Bulletin, 69(1), 27-49. https://doi.org/10.52476/trb.9603 View source: tirak-2021-black-blue
  4. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf View source: jacquard-2019-cyanotype-faq

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Blue fog in the whites

Before exposure, was the coated paper still lemon yellow?

All about this symptom: Blue fog in the whites: why it appears

Not this? Go back to the previous question Start over

Most likely cause

Chemical fog from the paper or the sensitizer; or coated paper stored too long

What to try

Discard it, try another paper, expose within hours of coating and store prepared paper dry; with New Cyanotype, a little citric acid in the sensitizer holds it back.

All about this problem: Blue fog in the whites: why it appears

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ View source: nsmm-2011-introduction-cyanotype
  3. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Did you wash until the greenish-yellow tint disappeared?

Not this? Go back to the previous question Start over

Most likely cause

Insufficient washing and blue bleeding into the whites

What to try

Wash longer, with a first, very dilute acid bath (Ware suggests 1-2% citric acid in the bath water).

Safety: Vinegar or citric acid go only diluted in the bath water; never add them to the powders or to the sensitizer of the classic formula. More on safety

All about this problem: Blue fog in the whites: why it appears

Sources for this answer
  1. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ View source: nsmm-2011-introduction-cyanotype
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

No verified cause

We don’t have a verified cause for this case

The sources we have checked don’t explain this case with certainty, so we’d rather not give you a specific remedy. The problem page has everything that is verified.

All about this problem: Blue fog in the whites: why it appears

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Blurry or lacking detail

Was the negative or object pressed tight against the paper, with glass on top?

All about this symptom: Blurry cyanotypes or lack of detail

Not this? Go back to the previous question Start over

Most likely cause

Poor contact between negative and paper

What to try

Work on a flat surface with heavy glass on top, or use a contact printing frame.

All about this problem: Blurry cyanotypes or lack of detail

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

No verified cause

We don’t have a verified cause for this case

The sources we have checked don’t explain this case with certainty, so we’d rather not give you a specific remedy. The problem page has everything that is verified.

All about this problem: Blurry cyanotypes or lack of detail

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Bronze or gray shadows

When do you see it?

All about this symptom: Bronzed shadows: overexposure in cyanotype

Not this? Go back to the previous question Start over

Most likely cause

It’s normal: a sign of full exposure

What to try

Wash it and let it dry: the shadows get their blue back during development or as they dry.

All about this problem: Bronzed shadows: overexposure in cyanotype

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Overexposure

What to try

Shorten the exposure time; use a test strip.

The sources don’t fully agree. On the problem page you’ll see what each one says.

All about this problem: Bronzed shadows: overexposure in cyanotype

Sources for this answer
  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones
  2. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  3. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype View source: ipi-sf-graphics-atlas

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

The solution or the paper has changed color

What do you see?

All about this symptom: How long cyanotype sensitizer lasts and how to store it

Not this? Go back to the previous question Start over

Most likely cause

Mold: ferric ammonium citrate solution is a good medium for it to grow

What to do in this case is not yet verified.

All about this problem: How long cyanotype sensitizer lasts and how to store it

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html View source: ware-sf-traditional-cyanotype
  3. Ware, M. (n.d.). Towards an unproblematic cyanotype chemistry. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/tocyan.html View source: ware-sf-towards-unproblematic

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

No verified cause

We don’t have a verified cause for this case

The sources we have checked don’t explain this case with certainty, so we’d rather not give you a specific remedy. The problem page has everything that is verified.

All about this problem: How long cyanotype sensitizer lasts and how to store it

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Streaks or an uneven coat

How did you apply the solution?

All about this symptom: Streaks and uneven coating

Not this? Go back to the previous question Start over

Most likely cause

The solution doesn’t spread evenly

What to try

Add a drop of wetting agent (Tween 20) just before coating, except on gelatin-sized papers.

All about this problem: Streaks and uneven coating

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018 View source: sentoku-2025-blue-particles

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Most likely cause

Too much solution

What to try

Load less and spread it with a rod or brush until no puddles remain; let it dry in the dark.

All about this problem: Streaks and uneven coating

Sources for this answer
  1. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html View source: ware-sf-new-cyanotype-process
  2. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf View source: jacquard-2021-instrucciones

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

No verified cause

We don’t have a verified cause for this case

The sources we have checked don’t explain this case with certainty, so we’d rather not give you a specific remedy. The problem page has everything that is verified.

All about this problem: Streaks and uneven coating

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

Over time, the blue has faded

Where has the piece been?

All about this symptom: Common cyanotype problems and how to fix them

Not this? Go back to the previous question Start over

Most likely cause

Light fading (reversible)

What to try

Keep it in the dark for a few days with air around it, unsealed: it recovers almost all its blue. Then hang it away from the sun.

All about this problem: Common cyanotype problems and how to fix them

Learn more: Do cyanotypes fade in the sun? Fading and recovery

Sources for this answer
  1. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf View source: ware-2003-blueprint-conserving
  2. Vogt-O'Connor, D. (1995). Caring for blueprints and cyanotypes (Conserve O Gram 19/9). National Park Service, Curatorial Services Division. https://www.nps.gov/subjects/museums/upload/19-09_508.pdf View source: vogtoconnor-1995-blueprints
  3. University of Illinois at Urbana-Champaign Library. (n.d.). Architectural papers (blueprint). Preservation Self-Assessment Program (PSAP). https://psap.library.illinois.edu/advanced-help/paper-unbound-architectural-blueprint View source: psap-blueprint
  4. Library of Congress. (n.d.). Preservation guidelines for matting and framing. https://www.loc.gov/preservation/care/mat.html View source: loc-matting-framing

There may be more than one cause. If none fits, check the full list of problems.

Not this? Go back to the previous question Start over

This case isn’t in the tree. Write to us with a photo of your print and we’ll look into it for the next review. Write to us · full list of problems

In short

  • It recognizes eleven symptoms, from a pale print to blue that fades over time.
  • Each result comes with its cause, what to try, the problem page and its sources.
  • The most likely cause of a pale print is a short exposure; when in doubt, overexpose.
  • If a case has no verified cause, we give no remedy: we point you to what is verified.
  • It also works without JavaScript, and it saves nothing you choose.
On this page (5 sections)
  1. How does the cyanotype Troubleshooter work?
  2. How to use the Troubleshooter, in three steps
  3. What problems does it recognize?
  4. What happens when the sources don’t explain a case?
  5. What the Troubleshooter doesn’t do

How does the cyanotype Troubleshooter work?#

The Troubleshooter works like a tree of questions. You choose the symptom you see in your print, answer one or more questions about how you made it and reach the most likely cause. Each result says what to try, links to the full page on the problem and shows the sources behind it.

It is one of the site’s free cyanotype tools, and it is built from the same sources as common cyanotype problems. Both come from the same data tree, so they don’t contradict each other: the Troubleshooter gets you to your case quickly, and the problem page explains it in full.

Where each cyanotype problem startsSix stages in a row: coating, drying in the dark, exposing, washing, drying and storing, with the problems that start at each one. Coating: streaks from an uneven coat; with New Cyanotype, puddles that crystallize; stains from touching with damp hands. Drying in the dark: the paper should stay lemon yellow, and if it turns green or blue it is fogged; paper stored too long. Exposing: with too little light, a pale print; with poor contact, little detail; with too much light, a dark, clogged print; gray or bronze shadows mean full exposure and are not a fault. Washing: a short wash leaves greenish-yellow whites; a long wash or hard water lightens the print. Drying: the blue darkens as it oxidizes in the air, and that’s normal. Storing: light fades it, and it recovers in the dark; alkalis turn it yellow and it doesn’t recover. Normal effects, which are not faults, are marked separately.Coatstreaks from anuneven coatpuddles thatcrystallize, with NewCyanotypestains from damphandsDry in the darkshould stay lemonyellow; green or blue =fogpaper storedtoo longExposetoo little light =pale printpoor contact =little detailtoo much light =dark, clogged printgray or bronzeshadows = fullexposure (normal)Washshort wash =greenish-yellowwhiteslong wash or hardwater = printlightensDrythe blue darkens asit oxidizes in air(normal)Storelight = fades;recovers in the darkalkalis = yellows;doesn’t recoverproblem that starts at that stagein cyan: normal effect, not a fault Where each cyanotype problem starts1Coatstreaks from an uneven coatpuddles that crystallize, with New Cyanotypestains from damp hands2Dry in the darkshould stay lemon yellow; green or blue = fogpaper stored too long3Exposetoo little light = pale printpoor contact = little detailtoo much light = dark, clogged printgray or bronze shadows = full exposure(normal)4Washshort wash = greenish-yellow whiteslong wash or hard water = print lightens5Drythe blue darkens as it oxidizes in air (normal)6Storelight = fades; recovers in the darkalkalis = yellows; doesn’t recoverproblem that starts at that stagein cyan: normal effect, not a fault
Diagram 1The stage of the process where each problem starts. Each problem has its stage of origin; those marked as normal are not faults.

How to use the Troubleshooter, in three steps#

  1. Choose what you see. Tap the card that best describes your print: pale, washes away when rinsed, yellow, stained, fogged, streaked, blurry, with bronzed shadows, with weak blue, the solution has changed color, or the blue has faded over time.
  2. Answer the questions. If you don’t know the answer, choose “I don’t know”: it explains how to check and takes you back to the question.
  3. Read the result. At the top you have the most likely cause and what to try; below, the full problem page and, in a drop-down, the sources.

At the top you’ll see your path, with each step linked so you can go back. “Start over” takes you to the beginning.

What problems does it recognize?#

The Troubleshooter recognizes eleven symptoms, each with its own page. These are the most common causes according to the verified sources; the tree adds questions to tell them apart and reaches more specific results.

Symptoms the Troubleshooter recognizes and their most likely cause
What you see Most likely cause according to the sources All about the problem
The print comes out light or pale Exposure too short; Jacquard advises that, when in doubt, it’s better to overexpose than to underexpose1 Why my cyanotype comes out pale
The whites come out yellow or greenish Insufficient washing: unexposed iron salts remain2 Why my cyanotype comes out yellow
Blue fog in the whites Paper that turned green or blue before exposure3 Blue fog in the whites
Stains Contact with damp hands, sweat or skin oil1 Stains on cyanotypes
Streaks or an uneven coat The solution didn’t spread evenly3 Streaks and uneven coating
Blurry or lacking detail Poor contact between the negative and the paper3 Blurry cyanotypes or lack of detail
Bronze or gray shadows It’s normal: a sign of full exposure1 Bronzed shadows: when it’s a fault
The blue is weak There’s room for improvement: two coats of solution or a very dilute acid bath during development1,3 How to get a deeper blue
The solution or the paper has changed color Mold: the citrate solution encourages it3 How long cyanotype sensitizer lasts

Safety: Use vinegar or citric acid only diluted in the bath water; never add them to the powders or to the classic-formula sensitizer. More on safety

The other two symptoms are a print that washes away when rinsed, which shares a page with the pale print, and blue that fades over time. The latter is usually light fading, which recovers: in Ware’s tests, a faded print recovered at least 95% of its density in the dark within a day4. Alkalis, on the other hand, break down Prussian blue5, and that damage can’t be reversed.

What happens when the sources don’t explain a case?#

When the sources we have checked don’t explain a case, the Troubleshooter doesn’t give you a remedy. It says “We don’t have a verified cause for this case” and takes you to the problem page, which has everything that is known. If there’s no source, we give no advice.

In the current tree there are five results like this, spread across stains, fog, lack of detail, streaks and color changes in the solution. Another five are published with a note that the sources don’t fully agree, for example on how long to wash or what hydrogen peroxide does; on the problem page you’ll see what each one says1,3.

What the Troubleshooter doesn’t do#

Without JavaScript, the Troubleshooter still works: each answer is a link that takes you to the next question or result. If your browser is very old, you’ll see all the questions and results in order, like a long guide.

If your case isn’t in the tree, write to us with a photo of the print and we’ll look into it for the next review.

Frequently asked questions

What do I do if my problem doesn’t appear in the Troubleshooter?

Check the full list of problems, because sometimes the symptom is described in other words. If it still doesn’t fit, there may be two causes at once, or one the verified sources don’t explain. In that case, change just one thing in each test and compare them; and if you like, write to us with a photo of the print for the next review.

Does the Troubleshooter work for a cyanotype on fabric?

Largely, yes: a pale print, yellow whites or fog have the same causes on fabric as on paper, because the chemistry is the same. What the tree doesn’t cover is caring for the finished garment, which has its own page within cyanotype on fabric.

Why do some results say the sources don’t agree?

Because in those cases the sources we have checked give different explanations or figures, for example on how long to wash or what hydrogen peroxide does. The result gives you the most likely cause and takes you to the problem page, where you’ll see what each source says.

How often is the Troubleshooter’s tree reviewed?

At every review of the site, and whenever a new source or a correction changes a cause or a remedy. Unanswered cases that people write to us about are the first to be looked at. The date of the last review is at the foot of this page, next to the sources.

Your next step

Review common problems and their causesPale prints, yellow whites, stains, fog, streaks or lack of detail: what causes each cyanotype problem according to the sources and how to fix it.

Sources

  1. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 12345
  2. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026.
  3. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 123456
  4. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf
  5. Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.