Skip to content
The Cyano Codex
Choose language

How to work safely with cyanotype

Classic cyanotype is a low-risk technique, but not a no-risk one: its reagents irritate the eyes, mustn’t be mixed with acids, and their waste harms aquatic life. With safety glasses, gloves and a few tidy habits, the studio is a calm place. Here is each safety rule, with its reason and its source.
Reviewed
Reading time
24 min
Sources
39

As an Amazon Associate I earn from qualifying purchases. How we are funded

Corner of a studio with the window ajar, an apron, safety glasses hanging up and gloves
Plate 1Goggles, gloves and an open window: all within reach.

In short

  • The classic reagents irritate the eyes and, according to Jacquard’s safety data sheet, the citrate irritates skin too.
  • With acids, ferricyanide can release very toxic gases: store them apart and never mix them.
  • For making up solutions, goggles; next to the UV lamp, UV-blocking safety glasses.
  • Nitrile gloves when mixing, brushing and washing; the solution stains fabric and other natural materials.
  • Leftover solution and the first wash bath go to the hazardous waste collection point in a labeled container; never into the garden or rivers.
  • With kids, use pre-coated paper and have an adult handle the chemistry, the lamp and the water.
On this page (11 sections)
  1. Is cyanotype safe?
  2. What protection to use
  3. The reagents and how to handle them
  4. Making up and storing the solutions
  5. Waste: what to do with leftovers
  6. Ultraviolet light: sun and lamp
  7. Ventilation and workspace
  8. Skin, clothing, textiles and other surfaces
  9. Kids and classroom
  10. Other formulas, toners and additives
  11. If something goes wrong

Is cyanotype safe?#

Classic cyanotype is safe if you work carefully, although it isn’t “nontoxic.” Many safety data sheets classify potassium ferricyanide as an eye irritant and toxic to aquatic organisms1. Its acute toxicity is low2. The real risk lies in the eyes, the skin, acids and waste.

Is cyanotype safe?
Where the risk is What to do Why
Eyes Safety glasses when weighing, dissolving and brushing Ferricyanide safety data sheets list serious eye irritation (H319)1
Skin Nitrile gloves and clothes you don’t mind staining Jacquard lists ferric ammonium citrate as a skin irritant (H315)3
Acids and heat Acids stored separately; powders and solution never heated With acids, ferricyanide releases very toxic gases (EUH032); above 300 °C it decomposes4
Water and environment Leftover solution and first wash bath to the hazardous waste collection point Ferricyanide is toxic to aquatic organisms (H411)5

Acute toxicity is the kind caused by a single significant exposure, for example swallowing the product, and for ferricyanide the median lethal oral dose in rat studies is very high2. Its name is unsettling because it contains cyanide groups, but they are bound to the iron in a complex. The ATSDR, the US agency that assesses toxic substances, considers these complexes much less toxic than hydrogen cyanide or sodium and potassium cyanide6. That complex breaks down with acids, intense heat or fire4, and almost every rule on this page follows from that.

Learn more: the complete materials list, where the goggles and the gloves appear at the moment they are needed.

A safety data sheet (SDS) is the document in which the manufacturer states a product’s hazards, how to handle it, how to store it and what to do if something goes wrong. Each hazard has a code: H319 means “causes serious eye irritation,” and H411, “toxic to aquatic life with long-lasting effects”2. If it’s your first time opening one, this guide to reading a safety data sheet will help you find what matters.

The safety data sheets don’t agree with one another, and it’s worth knowing that before you compare labels:

Is cyanotype safe?
Chemical Sheets that list hazards Sheets that don’t classify it
Potassium ferricyanide Honeywell and Thermo Fisher: eye irritation, aquatic toxicity and the acid warning1,5 Carl Roth keeps only the acid warning4; PanReac assigns it no hazard statement7
Ferric ammonium citrate Jacquard: skin, eye and respiratory irritant3 Thermo Fisher doesn’t classify it8

At The Cyano Codex we go by the most cautious version: if one sheet lists a hazard, we work as if it were there, even if another doesn’t include it. That way the advice covers the brands whose safety data sheets we’ve consulted.

If you are pregnant, breastfeeding or have a skin or eye condition, the sources we consulted give no specific guidance for cyanotype. Talk to your doctor before you start.

Learn more: is cyanotype toxic?

What protection to use#

For classic cyanotype, simple gear is enough: safety glasses and nitrile gloves. For making up and brushing the solution, use goggles marked D3, the ANSI Z87.1 mark for splashes and droplets9; next to the UV lamp, glasses with an ultraviolet filter will do10.

In the US, OSHA requires eye protection that meets ANSI Z87.1 wherever there are liquid chemicals or harmful light. Those criteria apply just as well at home as in a professional studio.

Glasses: two stages, two kinds#

Goggles seal all the way around the eyes and rest against the face; spectacle-style safety glasses are held on with temples, like ordinary glasses9,10. Under ANSI Z87.1, the D3 mark indicates protection against splashes and droplets11. The safety data sheets call for eye protection and, in Sigma-Aldrich’s case, eyewear that complies with EN 166, the European standard for general eye protection requirements2.

For working with the lamp, the lens has to block UV; under ANSI Z87.1, UV filter lenses carry a U number10. The NoCry clear glasses we suggest for the lamp are spectacle-style, not sealed goggles12: they protect against UV light, not against droplets while you make up the solution. We don’t have goggles in the catalog yet; in the meantime, the criteria for choosing them are the ones in the table.

Eye protection: two tasks, two types
Eyewear For which task What to look for in the marking
Goggles Weighing, dissolving, mixing and brushing ANSI Z87.1, D3 (splash and droplet)9
Spectacle-style glasses with UV filter Working next to the lamp while it’s on ANSI Z87.1, UV-blocking lens (U number)10
Sunglasses Exposing in the sun They should block 99–100% of UVA and UVB, as the WHO advises13

Prescription glasses with ordinary glass lenses aren’t enough with the lamp. The ICNIRP, the international commission that sets exposure limits for non-ionizing radiation, states that window glass lets radiation through down to about 310 nm14. Ordinary glass, therefore, doesn’t guarantee a cutoff at 365 nm.

Nitrile gloves#

Gloves protect your skin when weighing, brushing and during the first wash. The Sigma-Aldrich SDS calls for nitrile rubber gloves 0.11 mm thick with a breakthrough time of 480 minutes for ferricyanide2. Breakthrough time is how long the product takes to get through the glove. If you don’t have studio gloves, this is the type to look for, and you can check the material and standard on each box’s product sheet.

Mask and clothing#

Respiratory protection appears in the safety data sheets only for when dust forms: Sigma-Aldrich then calls for a P2 filter2. The simplest way to avoid needing it is not to raise dust, by weighing slowly and away from drafts, or to choose a kit in which the powder is dissolved in its own bottle. For your body, a lab coat or apron is enough; in the Science in School classroom activity, older students make up the solution wearing safety glasses, gloves and a lab coat15.

Diagram 1 sums up what protection each stage of the process calls for, from the solution to the last rinse.

Protection, stage by stageSeven stages in a row, each with the protection it calls for. 1. Make up the solution: goggles marked D3 and nitrile gloves. 2. Coat: the same, goggles and nitrile gloves. 3. Dry in the dark: dry paper can be handled without special precautions; wash your hands when you’re done. 4. Expose in the sun: your usual sun protection, shade, clothing, sunglasses and sunscreen. 5. Expose with a UV lamp: glasses with a UV-blocking lens, ideally with a U number, and no one looks at the lamp. 6. Wash: gloves for the first wash. 7. Dispose: leftover solution and the first bath in a labeled container, to the hazardous waste collection point; later rinses down the drain.1Make up thesolutionsafetygoggles (symbol3)nitrile gloves2Coatsafetygogglesnitrile gloves3Dry in the darkdry paper: nospecialprecautionswash your handswhen done4Exposing in the sunyour usual sunprotection:shade, clothing,sunglasses andsunscreen5Expose withUV lampUV-filter glasses(Z87.1)no one looks at thelamp6Washgloves for thefirst wash7Disposeleftovers and firstbath: labeledcontainer, to thecollection pointlaterrinses: down thedrain Protection, stage by stage1Make up the solutiongoggles (D3)nitrile gloves2Coatgogglesnitrile gloves3Dry in the darkdry paper: no special precautionsprecautionswash your hands when done4Exposing in the sunyour usual sun protection: shade,clothing, sunglasses and sunscreen5Exposing with a UV lampUV-filter glasses (Z87.1)no one looks at the lamp6Washgloves for the first wash7Disposeleftovers and first bath: labeledcontainer, to the collection pointlater rinses: down the drain
Diagram 1Protection, stage by stage. What protection each stage calls for, from the solution to the last rinse: almost everything comes down to safety glasses, gloves and common sense.

Learn more: safety glasses for cyanotype

The reagents and how to handle them#

The two reagents of classic cyanotype, potassium ferricyanide and ferric ammonium citrate, are handled with safety glasses and gloves, without raising dust and away from acids. Ferricyanide safety data sheets warn that in contact with acids it releases very toxic gases1.

Potassium ferricyanide, also called red prussiate, is a red crystalline solid16. Don’t confuse it with ferrocyanide, which is pale yellow and a different compound17. Ferric ammonium citrate is sold green or brown under the same CAS number, the code that identifies each substance, and it absorbs moisture from the air18. How to recognize each one on the label and what its safety data sheet states is in potassium ferricyanide hazards.

These are the habits that follow from the safety data sheets:

Learn more: safety with cyanotype reagents

Making up and storing the solutions#

Make up the solutions at room temperature, as Mike Ware does with the classic formula21, mix only what you’ll use and store each reagent tightly closed, labeled, in the dark and away from acids. The safety data sheets call for a dry place, separate from food and drink5.

The sources disagree on how long the mixture of the two solutions lasts: Ware talks about days21 and Jacquard, for its kit, about a few hours22. In practice, mix only what you’ll use in the session, and you’ll avoid leftovers that would have to go to the hazardous waste collection point. How long each solution lasts on its own is explained in how long cyanotype solution lasts.

Making up and storing the solutions
What you’re storing How to store it Source
Powdered ferricyanide In its original container, tightly closed, dry, protected from light and separate from acids; Carl Roth specifies 15 to 25 °C 1,4
Powdered ferric ammonium citrate Tightly closed, because it absorbs moisture; in a cool, dry, ventilated, dark place; Jacquard says to store it locked up 3
Stock solutions Each in its own brown glass bottle, in the dark 21
Sensitizer mixture Only enough for the session: it doesn’t last 22

Label each bottle as soon as you fill it, with the name of the compound and the date, and never use food or drink containers: no one should be able to mistake the solution for juice. Keep everything out of reach of children and pets, which is what the “store locked up” advice on Jacquard’s safety data sheet is about3.

Learn more: how to store reagents and solutions

Waste: what to do with leftovers#

Keep leftover solution and the first wash bath in a closed, labeled container, and take them to your local hazardous waste collection point. That’s the municipal facility where residents drop off household waste that isn’t picked up at the curb23. Later rinses can go down the drain with plenty of water.

That’s our recommendation, and it’s backed by the sources. Ferricyanide safety data sheets say it must not enter the sewer system2 and list it as toxic to aquatic organisms, with algae as the most sensitive organism in every sheet that gives data1. What’s more, once it’s dissolved in water, sunlight can split the cyanide off the iron complex6. In Spain, hazardous household waste must be collected separately as of 202523.

Since washing removes the unreacted salts from the sheet24, the first bath carries away most of the chemistry, which is why it’s collected separately. Never pour leftovers into the garden, onto the ground, into a river or down a well: PanReac warns that even small leaks into the ground endanger drinking water7.

We haven’t been able to confirm whether collection points accept liquids in every municipality, so check with your collection point or city hall before taking them. Outside Spain, ask your local government where household hazardous waste is dropped off.

Learn more: how to dispose of cyanotype waste

Ultraviolet light: sun and lamp#

Cyanotypes are exposed with ultraviolet light. In the sun, the protection you’d use for any time outdoors is enough: the WHO recommends shade, clothing, UV-filtering sunglasses and sunscreen from a UV index of 313. With a lamp, don’t look at it, and wear safety glasses that block UV10.

The lamps recommended for cyanotype emit at 365 nm because, for the same energy, the paper responds better to that wavelength than to 395 nm25. That radiation is UVA, the band the WHO places between 315 and 400 nm26. The lens of the eye absorbs nearly all radiation from 300 to 370 nm, and UV exposure speeds up the onset of some cataracts14. For the skin, the ICNIRP considers UVA’s contribution to cancer as dangerous as UVB’s14, and the WHO classifies UV radiation as carcinogenic to humans13. That’s why we don’t repeat what some lamp manufacturers say about 365 nm UVA, which they present as harmless to the eyes and skin.

With the lamp, nearly all the protection comes from how you work:

Learn more: UV protection for cyanotype

Ventilation and workspace#

Cyanotype doesn’t need a lab: a clear, washable table, away from food, with dim light for coating and a window to let fresh air in is enough. The international chemical safety card for ferricyanide says not to eat, drink or smoke while working28, and that determines where to set up your studio.

Where to set up your studio#

Choose a table you don’t eat at and can wipe with a damp cloth, and cover it with paper or plastic. The solution can sensitize almost any natural surface, from silk and cotton to wood or leather29, so a drop on an unprotected wooden table can end up blue. The kitchen is the last place to use: the safety data sheets say to keep reagents away from food and drink5.

If you don’t have another table, clear it completely before you start and use containers, spoons and trays kept for the studio that never go back to the kitchen. While you’re working with the powders or the solution, keep small children and pets out of the room, and close each bottle as soon as you’re done with it.

Dim light, not darkness#

You don’t need a darkroom for coating. Ware makes up and applies the solution under dim tungsten light and avoids daylight and fluorescent lights30; Jacquard and the National Science and Media Museum, the UK’s national museum of photography and media, give similar advice22,31. How to set up that corner is in a darkroom for cyanotype. For safety, all you need is enough light to read the labels and see where you put each bottle.

Air and dust#

The respiratory hazard listed in the safety data sheets is the reagent dust. According to the CAMEO database from NOAA, the US oceanic and atmospheric agency, ferric ammonium citrate dust irritates the nose, throat and eyes19. The international chemical safety card for ferricyanide describes coughing and a sore throat if inhaled, and calls for fresh air and rest28.

Jacquard’s citrate safety data sheet includes two precautionary statements, the P phrases that accompany each hazard: P261, avoid breathing dust, and P271, use only outdoors or in a well-ventilated area3. Ventilate the room, but weigh away from drafts and fans so the air doesn’t stir up the dust, and never blow on the scale.

Water, electricity and acids#

Wash prints in a tray kept for the studio and keep the UV lamp away from water: a plugged-in device and a full tray shouldn’t share the edge of the table. Acids, from vinegar to citric acid, stay off the table until it’s time for their bath. Science in School recommends not having strong acids and ferricyanide materials in the room at the same time15.

Water, electricity and acids
Before you open the first bottle, check Why
Table cleared, protected and away from food and drink The safety data sheets say not to eat, drink or smoke while working28
Acids stored somewhere else With acids, ferricyanide releases very toxic gases1
Safety glasses, gloves and running water within reach If it splashes in your eyes, rinse immediately with plenty of water5
A container with lid and label for the first bath The safety data sheets say the chemistry must not enter the sewer system2
Dim light, but enough to read the labels For coating, dim light is enough, with no direct sun22

If you’re working with a group#

In a workshop with several people, organization matters more than equipment: one station per person, a single table for the chemistry and one person in charge of the bottles. How to divide up the space and the time is explained in how to run a cyanotype workshop, and to keep the rules in view you can download the safety poster.

Skin, clothing, textiles and other surfaces#

Cyanotype solution irritates and stains, so work with nitrile gloves and clothes you don’t mind staining. Jacquard’s safety data sheet classifies ferric ammonium citrate as a skin irritant3, and if it gets on your skin, wash it with plenty of water and then with soap3.

Skin#

The irritation the sources describe is mild and depends on the product. Jacquard lists citrate as a skin irritant, with statement H3153; the CAMEO database mentions mild irritation with prolonged contact19, and the international chemical safety card describes ferricyanide as slightly irritating to the skin28.

If solution gets on you, take off the stained clothing and wash your skin with water for at least 15 minutes and then with soap, as Jacquard advises for citrate3. If irritation develops or persists, see a doctor2. When the session is over, wash your hands even if you wore gloves: in the Science in School activity, the whole group does so before leaving15.

Clothing and the table#

A drop of solution on a cotton T-shirt behaves like a tiny cyanotype: the sensitizer works on silk, cotton, wool, linen or leather29, and with light it will turn blue. That’s why an apron or old clothes, rolled-up sleeves and a protected table are a good idea. It’s the same reaction that cyanotype on fabric makes use of.

Coated paper and fabric#

The sources disagree on whether you need protection to handle paper that is already coated and dry. Science in School considers it safe with no special precautions, washing your hands afterward15; Jacquard recommends not touching the chemicals or the fabric29. Our approach: gloves or, at least, clean dry hands, and wash your hands afterward.

There’s a second reason for gloves. Damp hands can leave marks on coated paper, and sweat and skin oils can discolor the print32: gloves protect your skin and the image too.

The finished garment or print#

After washing, what’s left is Prussian blue, which on cotton paper also forms inside the fibers33: the water has already removed the salts that didn’t react24. The Royal Society of Chemistry considers both ferricyanide and the resulting Prussian blue low hazard20, and a dry cyanotype doesn’t stain your hands when you touch it33.

What we haven’t found is data on residues in garments or objects that end up in the mouth, such as bibs, teethers or tableware. Until there is, we don’t suggest cyanotype for those uses.

Plants that burn in the sun#

Botanical cyanotype has a risk of its own: phytophotodermatitis, a burn that appears when the sap of certain plants stays on the skin and is then exposed to ultraviolet light. It causes redness, blisters, swelling and dark patches, and it’s caused by plants in the families Apiaceae (the carrot family), Rutaceae (the citrus family) and Moraceae, with lime as an example34.

These are the plants named by the sources we consulted. It isn’t a complete list: with a plant you don’t know, wear gloves.

Plants that burn in the sun
Plant What the risk is Source
Lime and other plants in the citrus family (Rutaceae) Phototoxic sap: burns the skin when UV light hits it 34
Celery and parsnip Contain psoralens, which make the skin sensitive to UV 14
Giant hogweed (Heracleum) Contains phototoxic furocoumarins 14
Nettles Stinging: they sting when touched, no light needed 15

If you use them in a photogram, the image made by placing objects directly on the paper, handle them with gloves and long sleeves: that way their sap won’t stay on your skin when the light reaches it34.

Wood, leather and other surfaces#

Wood, leather and canvas are sensitized with the same solution29, but large pieces need more liquid and more wash water. Make up only what you’ll need and collect the first bath just as with paper. Before coating an object, think about how it will be used: a cutting board, a plate or a mug touches food, and we haven’t found data on that either. How to work with each material is in surfaces for cyanotype.

Learn more: cyanotype on fabric

Kids and classroom#

With kids, leave the chemistry, the lamp and the water to an adult, and have the little ones work with pre-coated paper, which already has the chemistry dried on. In the Science in School activity, younger students don’t touch the solution, and the dry paper is considered safe, with hand washing at the end15.

Science in School is a European popular-science journal for teachers, and in its activity older students make up the solution wearing safety glasses, gloves and a lab coat15. If UV lamps are used, make sure no one can look into them or point them at someone else’s eyes15.

As an age guide, you can use the European toy standard EN 71-4, in its 2013 version. It requires chemistry experiment sets to state a minimum age of no less than 8 years and use under adult supervision35. We don’t know whether cyanotype kits fall under that standard, and we haven’t been able to consult its current version, so we use it only as a guide.

Learn more: safe cyanotype with kids

Other formulas, toners and additives#

Everything above applies to classic cyanotype. The variants and toners use other reagents with other risks, and each one calls for reading its own safety data sheet before you open it. Mike Ware’s New Cyanotype uses ferric ammonium oxalate, which safety data sheets classify as harmful if swallowed and in contact with skin36.

The original New Cyanotype formula also contains a small amount of ammonium dichromate37. The European REACH regulation lists it among substances that are carcinogenic, mutagenic and toxic to reproduction, and its use in the European Union has required authorization since 201738. That’s why we don’t publish that recipe.

Toning and bleaching involve other products. Sodium carbonate, for example, irritates the eyes and reacts vigorously with acids, giving off heat39. We don’t recommend toning with lead or nickel salts, which were used in the past: Ware describes lead acetate as a seriously toxic heavy metal salt and points out that nickel salts are recognized carcinogens30.

Learn more: safety for toning and other formulas

If something goes wrong#

If solution splashes in your eyes, rinse immediately with plenty of water for at least 15 minutes, take out your contact lenses and see a doctor5. If it gets on your skin, remove the stained clothing and wash with water2. If in any doubt, call your country’s poison control center.

If someone swallows solution or powder, have them rinse their mouth and drink water, two glasses at most according to Sigma-Aldrich, without inducing vomiting unless a doctor says so2,1. If dust has been inhaled, fresh air and rest28. And if a strong acid comes into contact with the reagents, or there’s a fire, leave the room and call emergency services: that’s the situation in which the safety data sheets warn of very toxic gases1,4.

This site is not a substitute for professional advice. Verified poison information and emergency numbers for Spain, Argentina, Colombia, Chile, Mexico and the United States are on the first aid page.

Learn more: cyanotype first aid

In this chapter

Frequently asked questions

What precautions should you take when making cyanotypes?

The basics are few: safety glasses and nitrile gloves when making up and brushing the solution, reagents kept away from acids and never heated, a table away from food, and leftover solution and the first wash bath in a container for the hazardous waste collection point. With a UV lamp, also wear UV-filtering glasses and never look at it.

Do you need a mask for cyanotype?

Only if dust forms. The safety data sheets call for respiratory protection in that case, and Sigma-Aldrich then specifies a P2 filter. The simplest thing is not to raise dust: weigh the reagents slowly, away from drafts and fans, or use a kit in which the powder is dissolved in its own bottle.

Can you do cyanotype in the kitchen?

Better not. The international chemical safety card for ferricyanide says not to eat, drink or smoke while working, and other safety data sheets say to keep it away from food and drink. If you have nowhere else, clear the table, protect it and use containers, spoons and trays kept for the studio that never go back to the kitchen.

What do I do if cyanotype solution gets on my skin?

Take off the stained clothing and wash your skin with plenty of water and then with soap, as Jacquard’s citrate safety data sheet advises. If irritation develops or doesn’t go away, see a doctor. To prevent it, wear nitrile gloves from the moment you open the bottle until the first wash.

Do my prescription glasses protect me from the UV lamp?

There’s no guarantee. Prescription glasses with ordinary glass lenses don’t reliably cut off the 365 nm radiation that cyanotype lamps emit. To work next to the lamp, wear safety glasses that block UV and, above all, don’t look at it or turn it on before the print is in place.

Is it dangerous to leave a cyanotype out in the sun?

In the sun, the care needed is the same as for any time outdoors, and the print can expose on its own while you wait in the shade. The WHO recommends shade, covering clothing, UV-filtering sunglasses and sunscreen when the UV index reaches 3. And don’t look at the sun while you position the frame.

Your next step

How to handle and store the reagents

How to weigh, dissolve and store ferricyanide and citrate safely: protection, acids, heat, dust, labels, spills and wash additives.

Go to the next step: How to handle and store the reagents

Sources

  1. Honeywell Specialty Chemicals Seelze GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 2.4, ref. 31253). https://pdf.dutscher.com/doc/31253-1KG-HON/31253-1KG-HON_FDSen.pdf. Accessed October 16, 2026. 123456789101112
  2. Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026. 1234567891011
  3. Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026. 123456789
  4. Carl Roth GmbH + Co. KG. (2020). Safety data sheet: Kaliumhexacyanoferrat(III) (version 3.0, art. 7971) [in German]. https://www.gm.th-koeln.de/~werkst/sicherheit/sicherheitsdatenblatt/kaliumhexacyanoferrat_III_2020_06_15.pdf. Accessed October 16, 2026. 123456
  5. Thermo Fisher (Kandel) GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (revision 5, ref. A16946). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/potassium-hexacyanoferrate-iii-fisher-scientific.pdf. Accessed October 16, 2026. 1234567
  6. Agency for Toxic Substances and Disease Registry. (n.d.). Toxicological profile for cyanide: Chapter 5. Potential for human exposure [Draft for public comment]. U.S. Department of Health and Human Services. https://www.atsdr.cdc.gov/ToxProfiles/tp8-c5.pdf Accessed October 16, 2026. 12
  7. Panreac Química S.L.U. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 8.03, art. 1503). https://shop.lgsbv.com/H365/DWN/sds_131503_en.pdf. Accessed October 16, 2026. 12
  8. Thermo Fisher Scientific. (2025). Safety data sheet: Ammonium iron(III) citrate (revision 6, ref. 211840000). https://www.fishersci.ie/store/msds?partNumber=10762505&productDescription%3D250GR+Ammonium+iron%28III%29+citrate%2C+16.5+to+18.5%25+Fe&countryCode=IE&language=en. Accessed October 16, 2026.
  9. American National Standards Institute. (n.d.). ANSI/ISEA Z87.1-2020: Current standard for safety glasses [Blog article]. https://blog.ansi.org/ansi-isea-z87-1-2020-safety-glasses-eye-protection/ Accessed October 24, 2026. 123
  10. Bullard. (n.d.). Z87.1 marking [Product information]. https://apac.bullard.com/products/eye-protection/z87-1-marking/ Accessed October 24, 2026. 12345
  11. Occupational Safety and Health Administration. (n.d.). 29 CFR 1910.133: Eye and face protection [Regulation summary]. NIOSH PPE-Info, Centers for Disease Control and Prevention. https://wwwn.cdc.gov/PPEInfo/Standards/Info/29CFR1910133 Accessed October 24, 2026.
  12. NoCry. (n.d.). NoCry clear safety glasses with anti-fog, scratch-resistant wraparound lenses [Product listing, Amazon.com, ASIN B07GB8Y11G]. Accessed October 24, 2026.
  13. World Health Organization. (2022, June 21). Ultraviolet radiation [Fact sheet]. https://who.int/news-room/fact-sheets/detail/ultraviolet-radiation Accessed October 16, 2026. 123
  14. International Commission on Non-Ionizing Radiation Protection. (2010). ICNIRP statement: Protection of workers against ultraviolet radiation. Health Physics, 99(1), 66–87. https://doi.org/10.1097/HP.0b013e3181d85908 123456
  15. Egan, P. (2025, June 10). Adventures in cyanoprinting: Where art and chemistry meet. Science in School, 73. https://scienceinschool.org/article/2025/cyanoprinting-where-art-and-chemistry-meet/ 12345678
  16. Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(III) (version 7.1, product 455946). https://www.sigmaaldrich.com/sds/aldrich/455946. Accessed October 17, 2026.
  17. Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(II) trihydrate (version 6.12, product 455989). https://www.sigmaaldrich.com/sds/aldrich/455989. Accessed October 17, 2026.
  18. Thermo Scientific Chemicals. (n.d.). Ammonium iron(III) citrate, 16.5 to 18.5% Fe (AC211842500) [Product page]. Fisher Scientific. https://www.fishersci.com/shop/products/ammonium-iron-iii-citrate-16-5-18-5-fe-thermo-scientific/AC211842500 Accessed October 17, 2026.
  19. National Oceanic and Atmospheric Administration. (n.d.). Ferric ammonium citrate. CAMEO Chemicals. https://cameochemicals.noaa.gov/chemical/3462 Accessed October 16, 2026. 123
  20. Royal Society of Chemistry. (n.d.). The blueprint reaction. Education in Chemistry. https://edu.rsc.org/exhibition-chemistry/the-blueprint-reaction/3010606.article Accessed October 16, 2026. 12
  21. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 1234
  22. Jacquard Products. (n.d.). Cyanotype [Cyanotype Kit instruction booklet]. https://jacquardproducts.com/s/Cyanotype-Kit-INSTRUCTION-BOOKLET.pdf Accessed October 17, 2026. 1234
  23. Administración General del Estado. (2026). Eliminación de residuos domésticos. Punto de Acceso General (administracion.gob.es). https://administracion.gob.es/pag_Home/Tu-espacio-europeo/derechos-obligaciones/ciudadanos/consumidores/conexion-servicios/residuos.html Accessed October 16, 2026. 12
  24. Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype Accessed October 17, 2026. 12
  25. Turner, J., Parisi, A. V., Downs, N. and Lynch, M. (2014). From ultraviolet to Prussian blue: A spectral response for the cyanotype process and a safe educational activity to explain UV exposure for all ages. Photochemical & Photobiological Sciences, 13(12), 1753-1764. https://doi.org/10.1039/c4pp00166d
  26. World Health Organization. (n.d.). Ultraviolet radiation [Health topic]. https://www.who.int/health-topics/ultraviolet-radiation Accessed October 17, 2026.
  27. U.S. Food and Drug Administration. (2022, July 20). Do not use ultraviolet (UV) wands that give off unsafe levels of radiation: FDA safety communication (updated August 17, 2023). https://www.fda.gov/medical-devices/safety-communications/do-not-use-ultraviolet-uv-wands-give-unsafe-levels-radiation-fda-safety-communication Accessed October 16, 2026.
  28. International Programme on Chemical Safety (IPCS) and European Commission. (2002). ICSC 1132: Potassium ferricyanide [International Chemical Safety Card]. https://www.inchem.org/documents/icsc/icsc/eics1132.htm Accessed October 16, 2026. 12345
  29. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 1234
  30. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12
  31. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026.
  32. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026.
  33. Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018 12
  34. Grosu Dumitrescu, C., Jîjie, A.-R., Manea, H. C., Moacă, E.-A., Iftode, A., Minda, D., Chioibaş, R., Dehelean, C.-A. and Vlad, C. S. (2024). New insights concerning phytophotodermatitis induced by phototoxic plants. Life, 14(8), Article 1019. https://doi.org/10.3390/life14081019 123
  35. European Committee for Standardization. (2013). EN 71-4:2013. Safety of toys: Part 4: Experimental sets for chemistry and related activities. https://law.resource.org/pub/eu/toys/en.71.4.2013.html Accessed October 16, 2026.
  36. Thermo Fisher Scientific. (2025). Safety data sheet: Ammonium iron(III) oxalate trihydrate, 98% (revision 4, ref. 11449377). https://www.fishersci.ie/store/msds?partNumber=11449377&productDescription%3DAMMONIUM+IRON%28III%29+OXALATETRIHYDRATE%2C+98%25%2C100G&countryCode=IE&language=en. Accessed October 16, 2026.
  37. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026.
  38. European Commission. (2013). Commission Regulation (EU) No 348/2013 of 17 April 2013 amending Annex XIV to Regulation (EC) No 1907/2006 (REACH). https://www.legislation.gov.uk/eur/2013/348/data.html Accessed October 16, 2026.
  39. Th. Geyer GmbH & Co. KG. (2022). Safety data sheet: Sodium carbonate (version 4, art. 1393). https://pdf.dutscher.com/doc/1393-1KG-KIS/1393-1KG-KIS_FDS.pdf. Accessed October 16, 2026.

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.

How to cite this page

The Cyano Codex. (2026, October 16). How to work safely with cyanotype. https://cyanocodex.com/en/safety/