Botanical cyanotype: plants, flowers and leaves
- Reviewed
- Reading time
- 18 min
- Sources
- 32
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- A botanical cyanotype is a photogram: the plant blocks the light and leaves its white silhouette on blue.
- Flat, thin, dry plants give the best results: anything that doesn’t touch the paper comes out blurred.
- Pressing takes from a couple of days to a few weeks, according to the Natural History Museum.
- There is no fixed exposure time: it depends on the light, the formula and the paper, and you dial it in with a test strip.
- Citrus, parsnip and plants in the carrot family can burn your skin in the sun: handle them with gloves.
- Anna Atkins used it for a book of algae starting in 1843, the first book printed and illustrated with photographs.
On this page (13 sections)
- What is botanical cyanotype?
- Which plants work best for cyanotype?
- Cyanotype with leaves: your first photogram
- Fresh or pressed plants?
- What paper to use for botanical cyanotype?
- How to make a cyanotype with plants: the five steps
- Algae: Anna Atkins’s subject
- Composing the print
- A cyanotype herbarium
- Plants on fabric
- Can you collect plants anywhere?
- Safety: plants, sun and chemicals
- How do you care for a botanical print?
What is botanical cyanotype?#
A botanical cyanotype is a photogram made with plants: leaves, flowers, ferns or algae are laid on coated paper and exposed to ultraviolet light. Where the plant blocks the light, the paper stays white; where the light reaches it, it turns blue1. The result is a white silhouette on Prussian blue.
A photogram is a photograph made without a camera: you get one by placing objects on a light-sensitive surface and exposing them2. In Spanish the word (fotograma) also means a frame of film, but here it’s used in its workshop sense. Coating the paper means spreading over it the solution that reacts to light, a mixture of two iron salts: ferric ammonium citrate and potassium ferricyanide.
The chemistry, in short: Light changes the iron in the citrate, and that changed iron reacts with the ferricyanide to form Prussian blue, the pigment of the image3. The wash water carries away whatever hasn’t reacted. If you want to understand each step, it’s explained in how cyanotype works.
The technique and its botanical use were born almost together. John Herschel introduced cyanotype in 18424 and inspired Anna Atkins, the daughter of his friend John Children, to illustrate her botanical studies with it5. The result, Photographs of British Algae: Cyanotype Impressions, was distributed in installments starting in 18436, and the Natural History Museum in London describes it as the first book printed and illustrated with photographs7.
Learn more: Anna Atkins, who she was and what else she did with cyanotype.
Which plants work best for cyanotype?#
The plants that work best for cyanotype are flat, thin and thoroughly dry, with a recognizable outline: fern fronds, grasses, ginkgo or olive leaves, open umbels. Anything thick doesn’t lie flat on the paper and comes out blurred; Anna Atkins herself warned about this in the preface to her book6.
Atkins explained that some specimens were too thick for the glass to be pressed close enough against them to show every part perfectly6.
The rule that follows is simple: whatever touches the paper comes out sharp, and whatever lifts off it leaves a halo. That’s why a fern frond gives a clean edge and a whole rose doesn’t. In Atkins’s plates, Sabrina Franchi describes white and sometimes translucent silhouettes6. An opaque leaf leaves its shadow in white1; a very thin leaf, which lets some light through, comes out in intermediate tones and may show its veins.
| Plant | What it leaves on the paper | How to prepare it |
|---|---|---|
| Fern frond | White silhouette with fine edge detail | Pressed and dried, with the pinnae spread open |
| Grasses and seed heads | Fine lines and rhythm | Pressed; arranged in a fan or on a diagonal |
| Thin, flat leaves (ginkgo, olive) | Clean, opaque silhouette | Pressed, without thick stalks |
| Petals and very thin leaves | Intermediate tones where they let light through | Pressed carefully so they don’t wrinkle |
| Fleshy flowers or thick stems | Soft edges where they don’t touch the paper | Open them up, remove bulk and press them well |
| Algae | Fine, branching filaments | Drained, with no water on the paper |
Umbels, like those of fennel or wild carrot, give very detailed silhouettes, but they belong to the carrot family: wear gloves with them (we explain why in the safety section). Species you don’t know are best identified before you bring them to the table.
Learn more: cyanotype with flowers, where bulk and petals call for their own technique.
Cyanotype with leaves: your first photogram#
Cyanotype with leaves is the natural starting point: a flat, dry leaf laid on coated paper and pressed under glass leaves a clean-edged white silhouette in the sun. You need the chemicals or ready-made paper, a sheet of glass, a few clips and water for washing.
For your first test, choose a leaf with an outline you can recognize from across the room, like a fern, a ginkgo leaf or an olive sprig. A single one, centered with space around it, already makes a print. Then try two or three of different sizes, to see how their shadows relate.
Hold the leaf up to the light before placing it. If window light passes through it and you can see the veins, the leaf will probably come out light blue on the print, with whiter veins. If it’s opaque, it will come out solid white. It’s the same rule that governs all botanical cyanotype: the more the plant blocks, the whiter its mark1.
Learn more: cyanotype photograms, with lace, feathers or glass objects, which work the same way as leaves.
Fresh or pressed plants?#
For classic cyanotype, plants should be pressed and dry. Jacquard, a manufacturer of cyanotype chemicals, asks that the objects you place on the paper be dry and that you not wet the sheet before or during exposure8. A fresh plant keeps its bulk, and whatever doesn’t touch the paper comes out blurred.
There is a variation that works exactly the other way around, with the paper and the plants deliberately damp: wet cyanotype. It’s a different technique, with different results, and it has its own page.
Pressing doesn’t require special equipment. The Natural History Museum in London advises laying the plants as flat as possible between sheets of newspaper, inside a book, with even weight on top9. The book goes somewhere warm and dry, and the plants are checked every day9. They take from a couple of days to a few weeks, and they’re ready when they no longer feel damp9.
The herbarium of the Royal Horticultural Society (RHS), the British horticultural society, adds some useful habits10. It recommends not collecting in wet weather, laying the plant on blotting paper in its natural habit, removing leaves or flowers if there is too much bulk, and changing the top blotter after 24 hours10. Drying takes from two days to three weeks10.
If you press often or in quantity, a press with straps or screws spreads the weight better than a stack of books. What to look for when choosing one is in the guide to the flower press for cyanotype.
Learn more: how to press plants for cyanotype, the first step of any botanical print.
What paper to use for botanical cyanotype?#
For botanical cyanotype there are two routes: ready-made cyanotype paper, which already carries the dry chemistry and only needs exposing and washing, or cotton watercolor paper that you coat yourself. The first is the quickest way to experiment or to work with children; the second lets you choose the paper, the size and the texture.
Ready-made paper is still sold for teaching and as an educational toy5. It responds quickly to light, although it varies from one manufacturing batch to the next, as Turner and colleagues observed when using it in their demonstrations11. That’s why it’s worth testing one sheet from each new pack.
If you coat the paper yourself, choose cotton and, above all, paper without an alkaline buffer. Mike Ware, a chemist and an authority on iron processes, recommends for cyanotype only papers that have no chalk alkaline reserve, that is, calcium carbonate12. An alkaline buffer is an additive found in many papers and boards, and Prussian blue breaks down quickly in an alkaline medium5.
Weight matters too, because the paper gets wet in the wash. Ware gives 160 g/m² for sheets up to A4 and 240 g/m² or more for A3 or larger, so the paper doesn’t cockle12. An 80 g/m² printer paper may not survive the soaking and rinsing1.
Learn more: paper for cyanotype, with specific papers and how to read their labels.
How to make a cyanotype with plants: the five steps#
Cyanotype with plants follows the usual five-step process. You coat the paper in dim light, let it dry in the dark, arrange the plants under glass, expose it to the sun or a UV lamp, and wash it in water13. What’s specific to botanicals is preparing the plant well and getting it to lie flat.
- Coat in dim light. Jacquard says to do it in dim light away from the sun, and the National Science and Media Museum says to use low-level tungsten light, with no daylight or fluorescent light13,14. You don’t need a darkroom. If you’re using ready-made paper, this step is already done.
- Let it dry in the dark. Ware dries coated paper in the dark for one hour at room temperature12. Once dry, it should look pale yellow: if it has turned green or blue before exposure, the highlights will come out fogged12.
- Arrange in the shade. From bottom to top: a rigid board, the paper with the coated side up, the plants, and a sheet of glass held with clips. The Science and Media Museum accepts homemade frames with clips14. In blueprinting, a soft backing was already used to ensure contact, because poor contact gave blurred prints15.
- Expose. The time depends on the formula, the light source, the paper, the humidity and, in the sun, the time of day, the season and the clouds16,14. With the classic formula, the Science and Media Museum says to expose until the shadows look bronzed14. With commercial ready-made paper, about two minutes in the sun was enough in Turner’s study11.
- Wash and let it mature. Wash the print until the yellow is gone from the white areas: Ware estimates about 20 minutes in running water17. As it dries, the blue gradually darkens on contact with air, over about 24 hours according to Ware and Jacquard12,18.
Safety: Wear safety glasses and nitrile gloves to mix and brush on the solution; if it splashes into your eyes, rinse with plenty of water for 15 minutes. More on safety
Safety: Keep leftover solution and the first wash bath in a closed, labeled container for your local hazardous waste collection point; later rinses can go down the drain with plenty of water. More on safety
Setting up is the delicate moment, because the paper is already coated and the plant has to stay in place. Redden and Crawford place the specimens under incandescent or window light for the short time it takes, with the fluorescent lights off and no direct sun1. Keep in mind that ordinary window glass lets UVA light through19, so don’t leave the paper exposed any longer than necessary, and work away from any patch of sunlight.
To find your time, make a test strip: expose a scrap in sections, covering one more each time, with times that double from one section to the next20. How to read it is explained in cyanotype exposure time.
Learn more: how to make a cyanotype step by step, with the solution, the quantities and every stage in detail.
Algae: Anna Atkins’s subject#
Algae are the founding subject of botanical cyanotype. Anna Atkins recorded them in cyanotype for a decade in Photographs of British Algae: Cyanotype Impressions (1843–1853), a book she produced at her home in Kent and distributed in installments among her scientific contacts6. They are still a good project to start with.
Her contemporary Robert Hunt praised in 1848 how faithfully those prints reproduced even the finest tendrils of the marine plants6. That’s why algae are still a good subject: their fine branching is recorded in detail if the specimen is well spread out.
To work with algae, you can use herbarium sheets or fresh algae, but not wet ones1. Intertidal seaweeds can be collected all year round and keep for several days in seawater, cold and preferably in the dark1. Smoother papers give more detail, because the specimen lies flatter on them1.
Learn more: cyanotype with algae, a full tutorial in tribute to Atkins’s book.
Composing the print#
Composing a botanical print means deciding what each plant does inside the blue rectangle: which one rises, which one arches and how much space is left between them. A single centered frond already makes a print; several plants call for a hierarchy. Try out the composition dry, on any piece of paper, before moving it to the coated sheet.
Tradition offers good models. In the copy at the Metropolitan Museum in New York, each of Atkins’s plates bears its own handwritten label21, a habit that turns the print into a scientific record. In 1853, Atkins and her friend Anne Dixon assembled an album of one hundred plates of British and foreign ferns, now held by the Getty22. And the American printmaker Bertha E. Jaques made more than a thousand cyanotype photograms of wildflowers23.
If you want to practice without hunting for plants, download the botanical templates for cyanotype, silhouettes ready to print on transparency film.
Learn more: composition in botanical cyanotype, with ideas on framing, rhythm and series.
A cyanotype herbarium#
A herbarium is a collection of pressed plants with notes: name, place and date. In cyanotype, each plant also leaves its portrait in blue, and the notebook can keep the two together. Atkins built her own herbarium of British plants with her father and with her childhood friend Anne Dixon1.
That herbarium was donated to the British Museum in 1865, and its sheets are now at the Natural History Museum in London7. Botanical cyanotype was born as a tool for study, not just as decoration.
Learn more: a cyanotype herbarium, a botanical notebook project, page by page.
Plants on fabric#
Plants work the same way on fabric as on paper. Jacquard accepts any natural fiber for its chemicals, such as cotton, linen or silk24, and explains that polyester generally doesn’t work24. A heavy, flat cotton tote bag is a good first botanical piece on fabric.
Learn more: cyanotype tote bag, with ferns from start to finish.
Can you collect plants anywhere?#
Not just anywhere, and not just any way. The Natural History Museum asks you to collect with permission, carefully and in moderation, without damaging other plants9. Its rule is “one in twenty”: take at most one specimen out of every twenty, as long as the species is not legally protected9.
In Spain, Law 42/2007 prohibits collecting, cutting, uprooting or destroying in the wild the species on the List of Wild Species under Special Protection25. That list also includes seaweeds, such as Laminaria rodriguezii or Sargassum acinarium26. Spain’s autonomous regions have their own catalogs, and outside Spain each country’s rules apply: check them before collecting in the countryside or on the coast.
The simplest thing is to start close to home: the garden, the pots on the balcony, herbs from the grocery store or leaves that have already fallen.
Safety: plants, sun and chemicals#
Some plants cause phytophotodermatitis: their sap, combined with ultraviolet light from the sun, causes redness, blisters and dark patches on the skin27. Three families are most often involved: the carrot family (Apiaceae), such as parsnip; the rue family (Rutaceae), which includes citrus such as lime; and the fig family (Moraceae)27. The ICNIRP, the International Commission on Non-Ionizing Radiation Protection, cites the psoralens in celery and parsnip, both in the carrot family28.
Safety: With citrus, rue, fig, parsnip and other plants in the carrot family, wear gloves: their sap plus UV light can burn your skin. More on safety
The chemicals call for their own habits: several safety data sheets classify potassium ferricyanide as an eye irritant29, so mix and apply it wearing safety glasses and gloves. Everything else, with the safety data sheets, is in the cyanotype safety guide.
How do you care for a botanical print?#
A botanical cyanotype lasts a long time if you protect it from direct sun and alkaline materials. Mike Ware found that one hour of direct sun fades it much more than the same amount of light received at lower intensity30. Hang it away from the window and store it in paper without an alkaline buffer.
Ware maintains that this sensitivity to light and alkalis is not a serious problem if the piece is handled simply and gently31. And light fading is reversible. In Ware’s tests, a faded cyanotype recovered at least 95% of its density in the dark within a day30.
For storage, the NEDCC, a document conservation center in the United States, recommends unbuffered paper folders and envelopes, with no alkaline reserve32. All the details are in how to preserve a cyanotype.
In this chapter
- How to press plants for cyanotypeHow to press leaves and flowers for cyanotype: when to collect them, what paper to use, how much weight, how often to change the blotter and how to tell they’re dry.
- Cyanotype with flowers: how to get sharp silhouettesHow to make a cyanotype with flowers: which ones work, how to open and press them, how to press them under glass and what to expect from thin petals.
- Cyanotype with algae: how to make them like Anna AtkinsHow to make algae cyanotypes like Anna Atkins: collecting and storing the algae, choosing the paper, spreading them out without water, exposing and labeling the print.
- Composition in botanical cyanotype: how to design a printHow to compose a botanical cyanotype: main and supporting plants, format and margins, dry mock-up, setup, label and framing.
- A cyanotype herbarium: a botanical notebook projectA project to make a cyanotype herbarium: each pressed plant next to its blue print, with a penciled label, and how to assemble and store it so it lasts.
Frequently asked questions
Can you make a cyanotype with fresh flowers?
You can, but it usually turns out worse. Jacquard asks that objects be dry and that you not wet the paper before or during exposure, and a fresh flower keeps its bulk, so whatever doesn’t touch the paper comes out blurred. For sharp silhouettes, press it first. If you want to work with moisture on purpose, that’s a different technique: wet cyanotype.
How long should you leave plants in the sun?
There is no single time: it depends on the formula, the paper, the time of day, the season and the clouds. With the classic formula, the Science and Media Museum says to expose until the shadows look bronzed. With commercial ready-made paper, about two minutes in the sun was enough in one study. A test strip gives you your time.
Why does my plant’s silhouette come out blurry?
Almost always because the plant wasn’t touching the paper in that area. Anything thick or not properly pressed lifts off, and the shadow it casts goes soft; Anna Atkins warned about this in the preface to her book. Press the plant until it’s flat and dry, and use glass and clips to hold it down.
Which leaves give the most detail in cyanotype?
Flat, thin leaves with a strong outline: fern fronds, grasses, ginkgo or olive leaves. Very thin leaves let some light through and can show veins in intermediate tones, while opaque ones give a clean white silhouette. Combining the two gives the print depth.
Are there plants you shouldn’t use?
Any you don’t know, until you find out what they are. The sap of some plants, combined with ultraviolet light, can cause redness, blisters and dark patches on the skin: this happens with rue, fig, citrus such as lime, and plants in the carrot family, such as celery or parsnip. With these, wear gloves and wash your hands before going out in the sun.
How long does a botanical cyanotype last?
A long time, if you treat it well. What damages it most is direct sun, which fades the blue, and alkaline materials. Hang it away from the window and store it in paper without an alkaline buffer. If it has faded from light, it recovers almost all its blue in the dark: in Mike Ware’s tests, at least 95% within a day.
Your next step
Press your first plants for cyanotype
How to press leaves and flowers for cyanotype: when to pick them, what paper and weight to use, how often to change the blotter and when they’re dry.
Go to the next step: Press your first plants for cyanotypeSources
- Redden, H. and Crawford, A. (2025). Anna Atkins and the making of macroalgae cyanotypes and their role in science education. Applied Phycology, 6(1), 1-8. https://doi.org/10.1080/26388081.2024.2435049 123456789
- J. Paul Getty Museum. (n.d.). Photogram. In Glossary of photographic terms. https://www.getty.edu/art/collections/glossary/g341.html Accessed October 16, 2026.
- Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018
- Herschel, J. F. W. (1842). On the action of the rays of the solar spectrum on vegetable colours, and on some new photographic processes. Philosophical Transactions of the Royal Society of London, 132, 181-214. https://doi.org/10.1098/rstl.1842.0013
- Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf 123
- Franchi, S. (2024). Crafting and collecting cyanotypes: Anna Atkins's Photographs of British Algae: Cyanotype Impressions. Literature Compass, 21(1-3), Article e12708. https://doi.org/10.1111/lic3.12708 123456
- Lotzof, K. (n.d.). Striking blue cyanotypes of British algae by Anna Atkins. Natural History Museum. https://www.nhm.ac.uk/discover/anna-atkins-cyanotypes-the-first-book-of-photographs Accessed October 17, 2026. 12
- Jacquard Products. (2015). Cyanotype tips and troubleshooting [Manufacturer document, version 6.01.15]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Tips_and_Troubleshooting.pdf Accessed October 16, 2026.
- Hendry, L. (n.d.). How to press flowers. Natural History Museum. https://www.nhm.ac.uk/discover/how-to-press-flowers.html Accessed October 16, 2026. 12345
- Royal Horticultural Society. (n.d.). Pressing and collecting samples [RHS Herbarium]. https://www.rhs.org.uk/science/conservation-biodiversity/conserving-garden-plants/rhs-herbarium/pressing-and-collecting-samples Accessed October 16, 2026. 123
- Turner, J., Parisi, A. V., Downs, N. and Lynch, M. (2014). From ultraviolet to Prussian blue: A spectral response for the cyanotype process and a safe educational activity to explain UV exposure for all ages. Photochemical & Photobiological Sciences, 13(12), 1753-1764. https://doi.org/10.1039/c4pp00166d 12
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12345
- Jacquard Products. (n.d.). Cyanotype [Cyanotype Kit instruction booklet]. https://jacquardproducts.com/s/Cyanotype-Kit-INSTRUCTION-BOOKLET.pdf Accessed October 17, 2026. 12
- National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026. 1234
- Price, L. O. (1995). The history and identification of photo-reproductive processes used for architectural drawings prior to 1930. Topics in Photographic Preservation, 6, 41-49. https://resources.culturalheritage.org/pmgtopics/1995-volume-six/06_03_Price.html
- Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026.
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
- Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026.
- Tuchinda, C., Srivannaboon, S. and Lim, H. W. (2006). Photoprotection by window glass, automobile glass, and sunglasses. Journal of the American Academy of Dermatology, 54(5), 845-854. https://doi.org/10.1016/j.jaad.2005.11.1082
- Ilford Photo. (2017, March 30). Making a black & white print: Exposure testing. https://www.ilfordphoto.com/exposure-testing/ Accessed October 16, 2026.
- Atkins, A. (1843-1853). Photographs of British Algae: Cyanotype Impressions [Cyanotypes; book]. The Metropolitan Museum of Art, accession no. 2005.100.557 (1-154). https://www.metmuseum.org/art/collection/search/286656. Public domain. Accessed October 17, 2026.
- Peter, C. (2019). Cyanotypes of British and Foreign Ferns. J. Paul Getty Museum, Department of Photographs. https://museum-essays.getty.edu/photographs/atkins-british-foreign-ferns/ Accessed October 17, 2026.
- Smithsonian American Art Museum. (n.d.). Bertha E. Jaques [Artist profile]. https://americanart.si.edu/node/3590 Accessed October 17, 2026.
- Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 12
- Jefatura del Estado. (2007). Ley 42/2007, de 13 de diciembre, del Patrimonio Natural y de la Biodiversidad. Boletín Oficial del Estado, 299, December 14, 2007. https://www.boe.es/eli/es/l/2007/12/13/42 Accessed October 17, 2026.
- Ministerio de Medio Ambiente, y Medio Rural y Marino. (2011). Real Decreto 139/2011, de 4 de febrero, para el desarrollo del Listado de Especies Silvestres en Régimen de Protección Especial y del Catálogo Español de Especies Amenazadas. Boletín Oficial del Estado, 46, February 23, 2011. https://www.boe.es/eli/es/rd/2011/02/04/139 Accessed October 16, 2026.
- Grosu Dumitrescu, C., Jîjie, A.-R., Manea, H. C., Moacă, E.-A., Iftode, A., Minda, D., Chioibaş, R., Dehelean, C.-A. and Vlad, C. S. (2024). New insights concerning phytophotodermatitis induced by phototoxic plants. Life, 14(8), Article 1019. https://doi.org/10.3390/life14081019 12
- International Commission on Non-Ionizing Radiation Protection. (2010). ICNIRP statement: Protection of workers against ultraviolet radiation. Health Physics, 99(1), 66-87. https://doi.org/10.1097/HP.0b013e3181d85908
- Honeywell Specialty Chemicals Seelze GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 2.4, ref. 31253). https://pdf.dutscher.com/doc/31253-1KG-HON/31253-1KG-HON_FDSen.pdf. Accessed October 16, 2026.
- Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 12
- Ware, M. (2014). Cyanomicon: History, science and art of cyanotype: Photographic printing in Prussian blue (rev. and expanded ed.). https://www.mikeware.co.uk/mikeware/downloads.html
- Northeast Document Conservation Center. (2018). Storage enclosures for photographic materials (Preservation Leaflet 5.6). https://www.nedcc.org/free-resources/preservation-leaflets/5.-photographs/5.6-storage-enclosures-for-photographic-materials Accessed October 17, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 16). Botanical cyanotype: plants, flowers and leaves. https://cyanocodex.com/en/botanical/
