How to frame a cyanotype
- Section
- Preservation
- Reviewed
- Reading time
- 8 min
- Sources
- 8
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- Mike Ware recommends a deep window mat, which leaves air between the work and the glass.
- Mat and backing board with no alkaline buffer: the AIC specifically calls for this for cyanotype.
- Ware wants no adhesive on the back: corners are better than hinges with paste.
- The work shouldn’t touch the glass; with sun or fluorescent lights in the room, UV-filtering glass is better.
- Hang it away from direct sun and strong spotlights, preferably on an interior wall.
On this page (7 sections)
How do you frame a cyanotype?#
A cyanotype is framed like any work on paper, with three differences. The mat has to be deep, to leave air1; no board touching it can contain an alkaline buffer2; and its back carries no adhesive1. The rest, glazing that doesn’t touch it and a spot away from the sun, is common to any artwork.
The full picture, from how to store it to how to display it, is in how to preserve a cyanotype. From front to back, a frame for a cyanotype has these layers:
- Glass or acrylic, UV-filtering if the room gets sun or fluorescent light3.
- Window mat, deep and with no alkaline buffer1,2.
- The cyanotype, held with corners and no adhesive on the back1,4.
- Backing board with no alkaline buffer2.
- The frame backing.
The mat: why it should be deep#
Mike Ware recommends mounting a cyanotype with a deep window mat, because it leaves a reservoir of air between the work and the glass1. That air matters: with oxygen, a cyanotype recovers the blue it loses to light, and without it, it stays faded1.
The mat, or passe-partout, is the board with a cut-out window that surrounds the work. The American Institute for Conservation (AIC) guidelines on mounting photographs include Ware’s recommendation2. And the mat also does its usual job: separating the work from the glass, which shouldn’t touch it4.
We haven’t found a minimum depth in the sources. The thicker the window board, the more air there is in front of the work.
Which mat should you use for a cyanotype?#
A mat with no alkaline buffer. The American Institute for Conservation exhibition guidelines say that materials with an alkaline buffer shouldn’t be used with cyanotypes2, because Prussian blue breaks down quickly in contact with alkalis5. The same goes for the backing board.
Here’s the catch: many framing guides for works on paper recommend exactly the opposite. The Library of Congress advises pH-neutral or slightly alkaline board4, and the US National Archives accepts buffered or acid-free board3. These are general guidelines that don’t address cyanotype.
| What you’ll hear | What the sources say | Source |
|---|---|---|
| Any museum board will do | General guides accept neutral or slightly alkaline board, but they don’t address cyanotype | 4 |
| “Acid-free” is enough | That label doesn’t guarantee that a material is safe for photographs | 6 |
| Better a buffered board, just in case | No alkaline-buffered materials with cyanotypes | 2 |
What to look for on the label: unbuffered, or “no alkaline buffer.” Acid-free isn’t enough, because a board can be acid-free and still be buffered6.
The AIC guidelines cite as examples two 100% cotton museum boards with no alkaline buffer, in a 2004 list2; we don’t name them because we haven’t checked whether they’re still on sale. For the same reason we don’t recommend any particular mat: we haven’t found one that clearly states it has no alkaline buffer. The criteria, and whatever we manage to verify, are in framing supplies for cyanotypes.
How do you mount the work without damaging it?#
With corners, and no adhesive on the back. Mike Ware advises against applying any adhesive to the back of a cyanotype1, and the Library of Congress prefers adhesive-free mounting, such as corners, for any work on paper whenever possible4.
Corners are small pockets of paper or inert plastic film that hold the corners of the work and are attached to the backing board, not to the work3. For a cyanotype, they should be made of paper with no alkaline buffer2 or of polyester.
Japanese paper hinges with wheat starch paste are the usual alternative when adhesive is needed4. With a cyanotype, Ware doesn’t want them1, so corners are the first choice.
Which glazing should you use?#
Glass or acrylic, UV-filtering if the room gets sun or fluorescent light, as the US National Archives advises for papers and photographs3. The essential thing is that the work doesn’t touch the glazing4; the mat takes care of that or, if there isn’t one, spacers.
The filter helps, but it isn’t enough on its own. We haven’t found a source that quantifies how much it protects a cyanotype. And fading depends mainly on the intensity of the light: an hour of direct sun dulls it far more than the same amount of soft light1.
And don’t seal the frame airtight: a cyanotype needs air to recover its blue1.
Where should you hang a framed cyanotype?#
Away from direct sun and any strong spotlight, preferably on an interior wall, which goes through fewer changes in temperature and humidity than an exterior one4. With cyanotype this matters more than with other works on paper, because strong light fades it quickly1.
If it dulls over time, it isn’t lost: a few days in the dark bring back almost all its blue1. For a valuable piece, the safest option is to display a reproduction and keep the original in the dark3. For historical cyanotypes, the AIC guidelines propose a maximum of 3 months on display at very low light, and considering a facsimile7.
How much light it can take, with each source’s figures, is explained in why cyanotypes fade.
Can it be sealed or varnished?#
Sealing, no: a cyanotype needs air to recover the blue it loses to light, and without oxygen it stays faded1. Varnishing we don’t recommend either, because the conservation sources we’ve consulted say nothing about varnishes, waxes or UV-protective sprays.
If you still want to try, do it first on an offcut of a test print: Jacquard warns that high-pH paints and dyes can weaken or erase the blue8. Why alkalis are the great enemy is explained in alkaline buffer and cyanotype.
Frequently asked questions
Can I frame a cyanotype without a mat?
Yes, as long as it doesn’t touch the glass: framing guides call for separating the work with a mat or with spacers. With a cyanotype, a deep window mat has one more advantage, the one Mike Ware highlights: it leaves a reservoir of air between the work and the glass that helps it recover the blue it loses to light.
Can you stick a cyanotype down with tape?
Better not. Mike Ware advises against applying any adhesive to the back of a cyanotype, and the Library of Congress guidelines prefer adhesive-free mounting for any work on paper. Corners of paper with no alkaline buffer, or of polyester, hold the corners and are attached to the backing board, not to the work.
Do you need a special frame for a cyanotype?
You don’t need a special frame, but you do need to be careful about what goes inside it. Compared with other works on paper, three things change: the board, which should have no alkaline buffer; the mounting, with no adhesive on the back; and the air, which a deep mat helps maintain. The molding can be whatever you like.
Can I frame an antique cyanotype?
You can, with more precautions. Museum guidelines are very restrictive about light for historical cyanotypes: the American Institute for Conservation’s proposes a maximum of three months on display at very low light, and considering a facsimile. The safest approach is to frame a reproduction and keep the original in the dark.
Your next step
Sources
- Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2–18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 12345678910111213
- American Institute for Conservation, Photographic Materials Group. (2004). Exhibition guidelines for photographic materials: Section 1.5.4 Matting, backboards, and support materials (S. Watkins, comp.). Photographic Materials Conservation Catalog. https://aic.wikiworks.com/wiki/PMG_Section_1.5.4_Matting,_Backboards,_and_Support_Materials Accessed October 16, 2026. 12345678
- National Archives and Records Administration. (n.d.). Displaying family papers and photographs. How to preserve family archives. https://www.archives.gov/preservation/family-archives/displaying Accessed October 16, 2026. 12345
- Library of Congress. (n.d.). Preservation guidelines for matting and framing. https://www.loc.gov/preservation/care/mat.html Accessed October 16, 2026. 12345678
- Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf
- Northeast Document Conservation Center. (2018). Storage enclosures for photographic materials (Preservation Leaflet 5.6). https://www.nedcc.org/free-resources/preservation-leaflets/5.-photographs/5.6-storage-enclosures-for-photographic-materials Accessed October 17, 2026. 12
- Wagner, S., McCabe, C. and Lemmen, B. (2001). Guidelines for exhibition light levels for photographs. Topics in Photographic Preservation, 9, 127–128. https://resources.culturalheritage.org/pmgtopics/2001-volume-nine/09_11_Wagner.pdf
- Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 16). How to frame a cyanotype. https://cyanocodex.com/en/care/framing/