Skip to content
The Cyano Codex
Choose language

Flower press for botanical cyanotype: what to look for

A flower press for cyanotype has to leave plants flat and dry, because only what touches the coated paper comes out sharp. To start, a few books, newspaper and a weight are enough; a press with screws or straps spreads the pressure better if you press often or work with large plants. Here’s what to look for in one.
Section
Materials
Reviewed
Reading time
8 min
Sources
7

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Some links on this page go to Amazon. If you buy through them, we earn a commission and the price you pay doesn’t change. We choose the types of material on technical grounds, and the details for each product come from the manufacturer.

A closed wooden flower press with fern tips peeking out between the blotting papers
Plate 1A flower press with dry, flat plants.

In short

  • Flat, dry plants give sharp silhouettes: anything that lifts off the paper comes out blurry.
  • The Natural History Museum presses between newspaper inside a book, with even weight on top.
  • Choose a press by its usable size: the largest plant you want to print has to fit.
  • The RHS places the plant between blotting paper and cardboard, and changes the top blotter after 24 hours.
  • Pressing takes anywhere from a couple of days to a few weeks: the plant is ready when it no longer feels damp.

How we made this selection

We haven’t tested these products and we don’t score them. We select them using data that can be checked: what the manufacturer states (composition, quantities, dimensions, standards), what the technical literature says about each material, and whether they are on sale on Amazon on the review date. We sort them by use, not by quality. Commission plays no part in the criteria. If a product stops meeting them, it comes out of the guide.

How we work

On this page (8 sections)
  1. Do you need a flower press for cyanotype?
  2. What to look for in a flower press before buying
  3. How a flower press is assembled
  4. The homemade alternative: books and a weight
  5. How long does pressing take?
  6. What to press and what not to
  7. Botanical cyanotype without mixing chemistry
  8. If none of these fit

Do you need a flower press for cyanotype?#

You don’t need a flower press to start botanical cyanotype. The Natural History Museum in London recommends pressing flowers as flat as possible between sheets of newspaper, inside a book, with an even weight on top1. A purpose-made press spreads the pressure better, which you’ll notice if you press often or work with large plants.

Pressing matters because cyanotype is a contact print. A flat, dry plant lies fully under the glass and leaves a cleanly edged silhouette; Anna Atkins herself noted that when a specimen was thick, she couldn’t press the glass down enough and the impression came out imperfect in places2. Moisture is the other reason: Jacquard asks that objects placed on the paper be dry3.

This guide is part of what you need to make a cyanotype. How to make a print with plants, from collecting to washing, is in botanical cyanotype.

What to look for in a flower press before buying#

In a flower press, look at four things: the usable size, whether it comes with blotting paper you can replace, whether it includes cardboard sheets to let moisture out, and how it applies pressure. Size comes first, because it decides which plants you’ll be able to print without folding them; the pressure system decides whether they end up evenly flat.

What to look for in a flower press for cyanotype
What to look for What to look for Why
Usable size The largest plant you want to print should fit with room to spare, and at least your paper size The plant dries in the shape it will have on the sheet
Blotting paper Included and easy to replace The RHS herbarium places the plant on blotting paper and changes the top sheet after 24 hours4
Cardboard Corrugated cardboard between layers The RHS stacks the layers with blotter next to the plant and cardboard outside4
Pressure Wing-nut screws or straps that press evenly across the whole surface The weight has to be spread evenly1

We haven’t found a reliable source that gives a specific pressure or weight, so we don’t give one. What the Natural History Museum does ask is that the weight be even1: if it’s concentrated in one spot, the plant won’t end up evenly flat.

How a flower press is assembled#

A flower press is assembled in layers: corrugated cardboard, blotting paper, the plant, another blotter and another piece of cardboard, between two boards that are tightened together. This is the order used by the RHS herbarium, which lays the plant on blotting paper keeping its natural habit and removes leaves or flowers if there’s too much bulk4. Moisture escapes through the blotter and the cardboard.

Fleshy or thick-stemmed plants need a little more. The Natural History Museum adds paper towels outside the newspaper on the first day1, and the RHS inserts a sheet of foam between the blotter and the cardboard to spread the pressure around thick parts4. The full step-by-step, layer by layer, is in how to press plants for cyanotype.

The homemade alternative: books and a weight#

The homemade alternative to a press is a few thick books, newspaper and a weight spread on top, which is what the Natural History Museum suggests1. Leave several pages between one plant and the next, and don’t use books you care about: moisture from the plants can cockle their pages.

It works well for thin leaves, ferns and grasses, and for a first batch. When you press often, or press large plants or bulky flowers, a press with screws or straps is worth it, because it presses evenly without your having to find weight every time.

How long does pressing take?#

Pressing takes anywhere from a couple of days to a few weeks, depending on the plant. The Natural History Museum recommends leaving them in a warm, dry place and checking them every day; they’re ready when they no longer feel damp1. The RHS herbarium gives two days to three weeks, changes the cardboard and the top blotter after 24 hours, and checks at least once a week4.

A press with spare blotters saves you waiting for the one you removed to dry. If you’re going to press several batches in a row, check the listing for loose replacement blotters, or whether you can cut your own to the size of the press.

What to press and what not to#

For cyanotype, plants that are naturally thin and flat work best: fern fronds, grasses, small leaves and open umbels. Collect in dry weather, as the RHS herbarium advises4, and with permission and in moderation: the Natural History Museum suggests a “one in twenty” rule, as long as it isn’t a protected species1.

In Spain, for plants, fungi and algae on the Listado de Especies Silvestres en Régimen de Protección Especial (list of wild species under special protection), Law 42/2007 prohibits intentionally collecting, cutting, uprooting or destroying them in the wild5. If you don’t know whether a plant is protected, don’t collect it.

Some plants cause phytophotodermatitis: their sap, combined with ultraviolet light from the sun, causes redness, blisters and dark patches on the skin. The families most involved are the Apiaceae, Rutaceae and Moraceae, such as parsnip, rue, fig and lime6.

Safety: With citrus, rue, fig, parsnip and other plants in the carrot family, wear gloves: their sap plus UV light can burn your skin. More on safety

What about algae?#

Algae, the subject of Anna Atkins’s book, don’t always need a press. For algae cyanotypes you can use herbarium sheets or seaweed that’s fresh but not wet; intertidal macroalgae can be collected year-round and keep for several days in seawater, cold and preferably in the dark7. Drain them and pat them dry before placing them on the paper, because the coated sheet must not get wet before or during exposure3.

If you want to keep them for another session, they’re pressed like any thin plant, between blotters. The whole process, from collecting to printing, is in cyanotype with algae.

Botanical cyanotype without mixing chemistry#

If you want to start with plants without mixing chemistry, pair a press with pre-coated paper. This combination brings together A4 sun print paper and a flower press: you press, compose on the sheet, expose and rinse. If you later prefer to coat your own paper, the press works just the same with the chemistry and cotton paper.

Bulky flowers have their own tutorial, because they change both pressing and contact: we explain it in cyanotype with flowers. And pre-coated paper, with the formats available, is in sun print paper for cyanotype.

If none of these fit#

The search below opens the flower presses that come up on Amazon.com for “cyanotype.” In each listing, check the usable size in centimeters, that it includes blotting paper and cardboard, and the pressure system, screws or straps. If you’re going to press often, also check whether replacement blotters in the same size are sold.

The shopping links on this page go to Amazon.com. If you shop elsewhere, search for flower press at your usual store. With your plants flat and dry, the next step is composing your first botanical print.

Frequently asked questions

What size flower press should I buy for cyanotype?

One that fits the largest plant you want to print, with room to spare. If you’re going to make A4 prints, the press should take at least that size, so the plants dry in the shape they’ll have on the paper. A small press forces you to fold or trim whatever doesn’t fit.

What paper goes in a flower press?

Absorbent paper: blotting paper or newspaper on both sides of the plant, and corrugated cardboard outside to let the moisture out. With fleshy plants, the Natural History Museum adds paper towels outside the newspaper on the first day. If the press comes with blotters, check that you can replace them, because they get changed during pressing.

How much weight should you put on a flower press?

We haven’t found a figure with a reliable source. What the Natural History Museum asks for is even weight over the plant: if it’s concentrated in one spot, the plant won’t end up evenly flat. In a screw press, tighten the corners equally; with books, spread the weight over the whole stack.

Can you press any plant for cyanotype?

Not all of them. In Spain it’s prohibited to collect plants, fungi and algae of protected species, and beyond that you should collect with permission and in moderation. Some plants, such as rue, fig and lime, have sap that can burn the skin under ultraviolet light: handle them with gloves.

Your next step

Press your first plants, step by stepHow to press leaves and flowers for cyanotype: when to collect them, what paper to use, how much weight, how often to change the blotter and how to tell they’re dry.

Sources

  1. Hendry, L. (n.d.). How to press flowers. Natural History Museum. https://www.nhm.ac.uk/discover/how-to-press-flowers.html Accessed October 16, 2026. 1234567
  2. Franchi, S. (2024). Crafting and collecting cyanotypes: Anna Atkins's Photographs of British Algae: Cyanotype Impressions. Literature Compass, 21(1-3), Article e12708. https://doi.org/10.1111/lic3.12708
  3. Jacquard Products. (2015). Cyanotype tips and troubleshooting [Manufacturer document, version 6.01.15]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Tips_and_Troubleshooting.pdf Accessed October 16, 2026. 12
  4. Royal Horticultural Society. (n.d.). Pressing and collecting samples [RHS Herbarium]. https://www.rhs.org.uk/science/conservation-biodiversity/conserving-garden-plants/rhs-herbarium/pressing-and-collecting-samples Accessed October 16, 2026. 123456
  5. Jefatura del Estado. (2007). Ley 42/2007, de 13 de diciembre, del Patrimonio Natural y de la Biodiversidad. Boletín Oficial del Estado, 299, December 14, 2007. https://www.boe.es/eli/es/l/2007/12/13/42 Accessed October 17, 2026.
  6. Grosu Dumitrescu, C., Jîjie, A.-R., Manea, H. C., Moacă, E.-A., Iftode, A., Minda, D., Chioibaş, R., Dehelean, C.-A. and Vlad, C. S. (2024). New insights concerning phytophotodermatitis induced by phototoxic plants. Life, 14(8), Article 1019. https://doi.org/10.3390/life14081019
  7. Redden, H. and Crawford, A. (2025). Anna Atkins and the making of macroalgae cyanotypes and their role in science education. Applied Phycology, 6(1), 1-8. https://doi.org/10.1080/26388081.2024.2435049

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.