Skip to content
The Cyano Codex
Choose language

Brushes for cyanotype: what to spread the solution with

To coat paper for cyanotype you can use a foam brush, a wide brush or a glass rod, always set aside for the studio. They change how much solution you use and how the edge looks: according to Mike Ware, a rod uses less than a brush. Here’s how to choose each tool, how to look after it, and what isn’t known.
Section
Materials
Reviewed
Reading time
7 min
Sources
6

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Some links on this page go to Amazon. If you buy through them, we earn a commission and the price you pay doesn’t change. We choose the types of material on technical grounds, and the details for each product come from the manufacturer.

Overhead view of a wide flat brush, paintbrushes, foam brushes and a glass rod
Plate 1Brushes, foam and a glass rod.

In short

  • Foam brush, wide brush or glass rod: all three work for spreading the solution.
  • According to Ware, about 1.5 ml is enough for 20.3 × 25.4 cm with a rod; with a brush, up to twice as much.
  • A brush leaves stroke marks at the edges; a rod uses less, but takes practice.
  • Keep the tool for cyanotype only: no other paints and nothing from the kitchen.
  • The claim that metal ferrules leave streaks gets passed around, but we haven’t been able to confirm it in reliable sources.

How we made this selection

We haven’t tested these products and we don’t score them. We select them using data that can be checked: what the manufacturer states (composition, quantities, dimensions, standards), what the technical literature says about each material, and whether they are on sale on Amazon on the review date. We sort them by use, not by quality. Commission plays no part in the criteria. If a product stops meeting them, it comes out of the guide.

How we work

On this page (8 sections)
  1. Which tool to use for coating
  2. How much solution does each tool use?
  3. What to look for when buying a brush
  4. One coat or two?
  5. The metal ferrule: what gets said and what’s known
  6. For fabric, a wider tool
  7. How to look after the tool
  8. If none of these fit

Which tool to use for coating#

To coat paper for cyanotype, any of these three tools will do: a foam brush, a wide flat brush such as a hake brush, or a glass rod. Coating means spreading the light-sensitive solution in a thin, even layer. All three manage it; what changes is how much you use and how the edge looks.

All three work; what changes is how much solution you use and how the edge looks. With a brush, the brush marks stay in the margins and become part of the print; a rod uses less solution1. This guide is part of what you need to make a cyanotype, and the full procedure is in how to coat paper for cyanotype.

Which tool to use to spread the solution
Tool Best for What you need to know
Foam brush Starting out: it’s the easiest to handle and doesn’t shed hairs Uses more solution than a rod1
Wide brush or hake brush Edges with visible, very expressive strokes Make sure it doesn’t shed hairs on the wet coating
Glass rod Using little solution Uses less than a brush1; takes practice and a flat table
Immersion (fabric) Soaking a whole garment or piece of fabric Jacquard allows painting or dipping the fabric2

How much solution does each tool use?#

The tool changes how much solution you use. Mike Ware estimates about 1.5 ml of solution for a 20.3 × 25.4 cm print spread with a glass rod3, and with a brush you can use up to twice as much1. For an A4 sheet, that’s about 1.8 ml with a rod and up to about 3.6 ml with a brush (our calculation).

Loading more doesn’t give more blue. In Ware’s New Cyanotype, excess solution pools and can crystallize inside the paper, leaving fern-shaped spots; that’s why he says not to overload4. With any tool, the goal is a coating with an even sheen, no puddles and no dry patches.

Consumption also matters when you buy the chemistry. A set like Jacquard’s states its yield in prints5, and that number comes out lower if you work with a brush and wide margins. If you want to calculate it for your format, the Sensitizer Calculator estimates it by area.

What to look for when buying a brush#

When buying a brush for cyanotype, look at four things: that it’s wide enough for your format, that it doesn’t shed hairs or crumble, that it rinses and dries easily, and that you can keep it just for the studio. None of the sources consulted requires a particular model: these are practical criteria.

  1. Width. The wider it is, the fewer strokes it takes to cover the sheet. For A4, a brush or hake brush several centimeters wide spreads the coating in a few strokes; for small prints, a narrower flat brush gives more control.
  2. Nothing comes loose. A hair or a crumb of foam on the wet coating leaves a mark the light will record.
  3. Easy to rinse. When you finish, rinse the tool with water and let it dry: choose one you can rinse thoroughly.
  4. Studio only. Don’t use it with other paints or take it back to the kitchen.

If the solution spreads unevenly, with streaks or areas that don’t take it, the cause may not be the tool. Ware recommends adding one or two drops of 20% Tween 20 per 10 ml to the traditional solution so the paper absorbs it better1, although it can react badly with gelatin-sized papers4. The causes of streaks, in order, are in streaks and uneven coating.

One coat or two?#

One coat is enough for a cyanotype, but two coats give denser prints: Jacquard notes that paper can be coated twice for a deeper blue2. It’s more a question of technique than of tool, although the tool affects how the second pass lies over the first.

Jacquard doesn’t say how long to wait between coats. The prudent thing is for the first to be dry before the second: Ware lets coated paper dry in the dark, at room temperature, for about an hour3. With a foam brush, apply the second coat gently, without scrubbing, so you don’t lift the first. More ways to deepen the blue are in how to get a deeper blue.

The metal ferrule: what gets said and what’s known#

The ferrule is the collar, often metal, that joins a brush’s bristles to the handle. The claim goes that the ferrule’s metal, in contact with the solution, oxidizes and leaves streaks or spots on the print. It makes some sense, but we haven’t been able to confirm it in any reliable source, so we don’t treat it as a buying criterion.

If you’d rather not take the risk, a foam brush or a brush with a plastic ferrule avoids the question. And whatever your tool, load it without dripping and don’t leave it soaking in the solution: that way the ferrule barely touches the liquid.

For fabric, a wider tool#

To coat fabric, use a wider brush than for paper, or simply immerse it. Jacquard notes that fabric can be painted with or dipped in the sensitizer and left to air-dry in the dark2. Fabric uses more solution than paper: with Jacquard’s figures, about 30% more for the same area (our calculation)5.

With a brush you control the area and the edges; immersed, the fabric soaks through completely and the blue reaches the whole weave. Which fabric to buy and how far a set goes is in fabric for cyanotype.

How to look after the tool#

At the end of the session, rinse the brush with water, squeeze it out and let it dry before storing it with the rest of your studio supplies. Don’t pour the mixture left on the tool or in the cup back into the stock solution bottles. The leftover and the first rinse water go into a closed, labeled bottle for the municipal waste collection point6.

Safety: Work away from food and drink, with dedicated tools that never go back to the kitchen. More on safety

Store the tool dry and separately, so it doesn’t get mixed up with your painting brushes. If the foam cracks or the brush starts shedding hairs, replace it before it ruins a print.

If none of these fit#

The search below opens the brushes that come up on Amazon.com for “cyanotype.” In each listing, check that it’s a foam brush or a wide brush, the ferrule material if that matters to you, and that it rinses and dries easily. Glass rods aren’t in this selection: they’re sold as laboratory equipment.

The shopping links on this page go to Amazon.com. If you shop elsewhere, search for foam brush or hake brush at your usual store. With your tool ready, the next step is to coat your first sheet of paper in dim light and let it dry in the dark.

Frequently asked questions

What brush is used for cyanotype?

A wide flat brush, a foam brush or a glass rod. A foam brush doesn’t shed hairs and rinses easily; a brush leaves edges with visible strokes, and a rod uses less solution, though it takes practice. What matters is that you keep it for the studio and don’t use it with other paints.

Foam brush or bristle brush for coating paper?

Both work; what changes is how the edge looks. A foam brush spreads the solution without shedding hairs and rinses easily; a wide brush leaves visible brush marks in the margins, which many prints use as part of the image. Both use more solution than a glass rod.

Where can I buy a glass rod for cyanotype?

We don’t have one in this selection, because glass rods are sold as laboratory equipment. According to Mike Ware, a rod uses less solution than a brush; in exchange, it takes practice and a flat table.

How do I clean the brush after coating?

Rinse it with water when you finish, squeeze it out and let it dry before storing it with the rest of your studio supplies, away from kitchen utensils. Don’t pour the solution left in it back into the bottles: leftover mixture and the first rinse water go into a closed bottle for the municipal waste collection point.

Your next step

Coat your first sheet with the brush you choseHow to coat paper for cyanotype: how much solution per sheet, brush or rod, wetting agent, drying in the dark and how to tell the coating came out right.

Sources

  1. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 12345
  2. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 123
  3. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12
  4. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 12
  5. Jacquard Products. (n.d.). Cyanotype sensitizer set [Product page]. https://www.jacquardproducts.com/cyanotype-set Accessed October 16, 2026. 12
  6. Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026.

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.