Cyanotype chemicals: how to handle and store them safely
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- Goggles and nitrile gloves from the moment you open the bottle until the first wash.
- No acid in the powders or the solution: with acids, ferricyanide releases very toxic gases.
- The classic formula is mixed at room temperature; ferricyanide decomposes above 300 °C.
- Ferricyanide and citrate are stored tightly closed, dry, in the dark and away from acids.
- Hydrogen peroxide goes only into the bath, diluted, and only the 3% drugstore kind.
On this page (8 sections)
- Which chemicals cyanotype uses and the risk of each
- What protection to wear when handling them
- Why aren’t they mixed with acids?
- Can you heat the solution?
- How to weigh and dissolve without raising dust
- How to store chemicals and solutions
- Hydrogen peroxide and other wash additives
- What to do if something spills
Which chemicals cyanotype uses and the risk of each#
Classic cyanotype uses two chemicals: potassium ferricyanide, which comes as red crystals, and ferric ammonium citrate, green or brown. According to the most cautious data sheets, the first irritates the eyes and is toxic to aquatic life1, and the second irritates the skin, eyes and respiratory tract2.
This page expands on two sections of the cyanotype safety guide: how to handle the chemicals and how to store them. First of all, it pays to recognize them correctly on the label, because the most common buying mistake is confusing ferricyanide with ferrocyanide, which is a different compound and doesn’t work in the classic formula3.
Swipe to see more columns
| Chemical | Other names on the label | Point | CAS number | Source |
|---|---|---|---|---|
| Potassium ferricyanide | Red prussiate of potash; potassium hexacyanoferrate(III); K₃[Fe(CN)₆] | Red crystalline solid | 13746-66-2 | 1,4 |
| Ferric ammonium citrate | Ammonium ferric citrate; iron(III) ammonium citrate; ammonium iron(III) citrate | Green or brown, with the same CAS; absorbs moisture | 1185-57-5 | 2,5 |
| Potassium ferrocyanide (not the one in the formula) | Yellow prussiate of potash; potassium hexacyanoferrate(II) | Pale yellow crystals | 14459-95-1 (trihydrate) | 6 |
The CAS number is the code that identifies each substance in any country. Safety data sheets (SDS), the documents in which the manufacturer declares a product’s hazards, summarize them in coded statements. These are the ones that appear for the two chemicals:
| Code | What it means | Declared for which chemical | Source |
|---|---|---|---|
| H319 | Causes serious eye irritation | Ferricyanide (Honeywell, Thermo Fisher, Sigma-Aldrich) and citrate (Jacquard) | 7,2 |
| H411 | Toxic to aquatic life with long-lasting effects | Ferricyanide | 1,8 |
| EUH032 | Contact with acids liberates very toxic gas | Ferricyanide | 1,9 |
| H315 | Causes skin irritation | Citrate (Jacquard) | 2 |
| H335 | May cause respiratory irritation | Citrate (Jacquard) | 2 |
Data sheets differ between manufacturers: for ferricyanide, some declare eye irritation and aquatic toxicity and others don’t classify it9,10, and the same goes for the citrate11. On the label, each hazard comes with its pictogram, so two brands of the same chemical may carry different pictograms. Here we always follow the most cautious version. What each label declares, compound by compound, is in potassium ferricyanide hazards and on the ferric ammonium citrate page; to understand a full data sheet, read how to read a safety data sheet.
What protection to wear when handling them#
For weighing, dissolving, mixing and brushing, wear goggles, the kind that seal around the eyes, and nitrile gloves. Under ANSI Z87.1, eyewear for splashes and droplets carries the D3 mark12, and the Sigma-Aldrich data sheet calls for nitrile rubber gloves for ferricyanide7.
On US safety eyewear, the D3 mark indicates protection against splashes and droplets13. The NoCry glasses we suggest for the UV lamp are open glasses, not sealed goggles14: they’re for the light, not for droplets of solution.
The same Sigma-Aldrich data sheet specifies the rest of the equipment:
- eye protection that meets EN 166, the European standard for general requirements for eye protection7;
- nitrile gloves 0.11 mm thick, with a breakthrough time of 480 minutes, which is how long the product takes to get through the glove7;
- respiratory protection with a P2 filter only if dust forms7.
The international chemical safety card for ferricyanide adds what needs no equipment: don’t eat, drink or smoke while working15. If it splashes into your eyes, rinse immediately with plenty of water for at least 15 minutes and seek medical attention8.
Disposable nitrile gloves are enough for studio work if they meet what the data sheet calls for. This is the type to look for:
Why aren’t they mixed with acids?#
The chemicals aren’t mixed with acids because potassium ferricyanide releases very toxic gases in contact with them, as the EUH032 statement on its data sheets warns1. That’s why no acid goes into the powders or the solution, and acids are stored away from the chemicals.
The Carl Roth data sheet specifies that the gas is hydrogen cyanide9. Sigma-Aldrich extends the list of incompatibilities: with acids, ammonia, hydrochloric acid and nitrites there is a risk of explosion or of toxic gases forming, and with oxidizers, fluorine and nitrates violent reactions are possible7.
Educational sources place the risk with strong acids16, and some processes are developed with highly diluted acid. Mike Ware, for example, uses baths of nitric acid at around 1% or citric acid at 1–2% for New Cyanotype17. For a bath like that, the rule is simple: the acid goes only into the bath water, never into the powders or the solution; the baths aren’t heated, and the tray is rinsed before moving from one bath to another.
| Acidic | Where it appears | What its data sheet or source says | How to use it |
|---|---|---|---|
| Vinegar (dilute acetic acid) | Some wash baths | Irritates skin and eyes from 10% and is corrosive from 25%18 | Only in the bath water, with less than 10% acidity on the label |
| Citric acid | Development baths for some formulas | Eye irritant and, as a powder, a respiratory irritant; incompatible with oxidizers, reducing agents and alkalis19 | Dissolved in the bath water; the powder, never next to the ferricyanide |
| Nitric acid | Development of New Cyanotype | Concentrated, it is corrosive and gives off fumes, according to Ware20 | We don’t recommend it for working at home |
Can you heat the solution?#
There’s no need to heat the solution, and it’s best not to. Mike Ware dissolves the chemicals for the classic formula at room temperature3, and the data sheets say to avoid heat: ferricyanide decomposes above 300 °C and gives off hydrogen cyanide9, and Jacquard says to protect the citrate from light and heat2.
The international chemical safety card for ferricyanide sums it up: it decomposes on heating and produces toxic gases, including hydrogen cyanide15. In a fire, the citrate can form nitrogen oxides or ammonia21. That’s why the chemicals are mixed and stored away from stoves, heaters and open flames.
The gentle heat used for drying has nothing to do with those temperatures. To dry coated paper, Ware uses warm air at no more than about 40 °C for a few minutes, or leaves it to dry for an hour in the dark at room temperature20. The variants that do call for hot water when mixing the solution, such as New Cyanotype, have their own section in safety in toning and other formulas.
How to weigh and dissolve without raising dust#
Weigh the chemicals slowly, away from drafts and fans, without blowing on the scale and with eye protection and gloves on. Citrate dust irritates the nose, throat and eyes21, and the Jacquard data sheet says to avoid breathing it2. If your kit lets you dissolve the powder in its own bottle, even better.
For powdered chemistry kits, such as Jacquard’s, the manufacturer states that the powder needs 24 hours to dissolve completely22. It’s best to prepare it ahead of time and not to shake the bottle while it’s open. If you mix the solutions yourself, the amount of each chemical is in how to mix cyanotype solution; this is the safe working order:
- Clear and cover the table, and keep acids and food off it.
- Put on goggles and nitrile gloves before opening the bottle.
- Scoop the powder with a spoon or spatula kept for the studio and place it on a piece of paper or a small cup on the scale, without sudden movements.
- Dissolve it at room temperature in a glass or plastic container set aside for the studio; Ware uses distilled water3.
- Close the chemical’s bottle as soon as you’re done and label the solution.
- Wipe the scale and the table with a damp paper towel and keep it with the waste.
If powder falls outside, sweep it up dry without raising it and keep it in a container with a lid; don’t wash it down the drain7,15. If dust is inhaled, the international chemical safety card describes coughing and a sore throat, and calls for fresh air and rest15.
How to store chemicals and solutions#
Store each chemical in its original container, tightly closed, in a dry, dark place, away from acids and from food and drink1,8. Store solutions in dark glass bottles, in the dark and labeled3. And keep everything out of children’s reach.
| What you’re storing | How to store it | Why | Source |
|---|---|---|---|
| Powdered ferricyanide | Original container, tightly closed, dry, in amber glass or in the dark, away from acids; Carl Roth specifies 15 to 25 °C | Light degrades it, and with acids it releases very toxic gases | 9,7 |
| Powdered ferric ammonium citrate | Tightly closed, in a cool, dry, ventilated, dark place; Jacquard says to store it locked up (P405) | It absorbs moisture from the air and light breaks it down | 2,11 |
| Stock solutions | Each in its own brown bottle, in the dark | Mold can grow in the citrate solution within one or two weeks | 3 |
| Sensitizer mixture | Only what you need for the session | Doesn’t keep long: hours according to Jacquard, days according to Ware | 22,3 |
Label each bottle as soon as you fill it: compound name, date and a line such as “irritates eyes; keep away from acids.” If you’d rather not write them by hand, download the cyanotype bottle labels, with the data sheet information already filled in. Never use food or drink containers, not even washed ones, and keep chemicals and solutions together in a dedicated box, on a high shelf or in a cabinet that closes.
If you read that a few thymol crystals are added to the citrate solution to prevent mold, bear in mind that Ware, who suggests it, warns that thymol is harmful3. How long each solution keeps and how to tell whether it has gone bad is in how long cyanotype solution lasts.
Hydrogen peroxide and other wash additives#
Hydrogen peroxide is used only diluted in the bath water, never in the powders or the solution: the data sheets list ferricyanide as incompatible with strong oxidizers8. Use the 3% drugstore kind and keep it away from your eyes, because its data sheet classifies it as an eye irritant23.
The Chemos data sheet for 3% hydrogen peroxide has an inconsistency: it labels it an eye irritant, although its own thresholds only require that classification from 5% to 8%, and reserve serious eye damage for 8% or more23. The practical reading is the cautious one: treat it as an irritant and don’t use concentrations higher than the drugstore kind. What it does in the wash and how much to add is explained in cyanotype with hydrogen peroxide.
Other additives have less to report. Polysorbate 20, the wetting agent some formulas add to the solution under the trade name Tween 20, is not classified as hazardous according to its data sheet24. Citric acid and vinegar are in the acids table, and the toning and bleaching products are on the other formulas page.
What to do if something spills#
If powder spills, sweep it up dry, without raising it, into a container with a lid; if solution spills, soak it up with paper towels. In both cases, wear gloves, don’t let it reach the drain, and keep everything you collect for the hazardous waste drop-off7,1.
The data sheets put it in two precautionary statements: collect spillage (P391) and dispose of contents and container in accordance with regulations (P501)1. The international chemical safety card adds that the product must not be released into the environment15, and the data sheets treat its residues as hazardous waste that must not go into the sewer8.
If solution has spilled on you, first take off the contaminated clothing and wash your skin with plenty of water7; then clean up. What to do next with each kind of waste, from paper towels to an old bottle of chemical, is in how to dispose of cyanotype waste. And what to do about a splash in the eyes or swallowing, in cyanotype first aid.
Frequently asked questions
Where should potassium ferricyanide be stored?
In its original container, tightly closed, in a dry place protected from light, away from acids and from food and drink. Carl Roth specifies a temperature of 15 to 25 °C. If you transfer it to another bottle, make it dark glass with a label showing the compound name and the date.
Can I keep mixed solution for another day?
Sources disagree on how long the mix lasts: Ware talks about days, and Jacquard, for its kit, a few hours. To avoid piling up leftovers that then have to go to the hazardous waste drop-off, mix only what you’ll use in the session and store the two solutions separately, in dark, labeled bottles.
Can I use kitchen utensils to mix the solution?
It’s not a good idea. The data sheets say to keep the chemicals away from food and drink, and the international chemical safety card for ferricyanide says not to eat, drink or smoke while working. Use cups, spoons and trays kept for the studio, mark them so you can recognize them, and never return them to the kitchen.
Do the chemicals need to be stored under lock and key?
The Jacquard data sheet calls for it for ferric ammonium citrate, with precautionary statement P405. The ferricyanide data sheets don’t say so, but it’s the simplest way to keep both chemicals and their solutions out of children’s reach, so we apply it to all of them.
What do I do with a bottle of chemical I’m no longer going to use?
Take it to the hazardous waste drop-off in its original container, closed and labeled, after checking with them or with your local council that they accept it. The data sheets call for disposing of contents and container according to regulations and for keeping the product out of the sewer, so don’t empty it into the sink.
Your next step
Sources
- Honeywell Specialty Chemicals Seelze GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 2.4, ref. 31253). https://pdf.dutscher.com/doc/31253-1KG-HON/31253-1KG-HON_FDSen.pdf. Accessed October 16, 2026. 12345678
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026. 12345678
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 1234567
- Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(III) (version 7.1, product 455946). https://www.sigmaaldrich.com/sds/aldrich/455946. Accessed October 17, 2026.
- Thermo Scientific Chemicals. (n.d.). Ammonium iron(III) citrate, 16.5 to 18.5% Fe (AC211842500) [Product page]. Fisher Scientific. https://www.fishersci.com/shop/products/ammonium-iron-iii-citrate-16-5-18-5-fe-thermo-scientific/AC211842500 Accessed October 17, 2026.
- Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(II) trihydrate (version 6.12, product 455989). https://www.sigmaaldrich.com/sds/aldrich/455989. Accessed October 17, 2026.
- Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026. 12345678910
- Thermo Fisher (Kandel) GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (revision 5, ref. A16946). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/potassium-hexacyanoferrate-iii-fisher-scientific.pdf. Accessed October 16, 2026. 12345
- Carl Roth GmbH + Co. KG. (2020). Safety data sheet: Kaliumhexacyanoferrat(III) (version 3.0, item 7971) [in German]. https://www.gm.th-koeln.de/~werkst/sicherheit/sicherheitsdatenblatt/kaliumhexacyanoferrat_III_2020_06_15.pdf. Accessed October 16, 2026. 12345
- Panreac Química S.L.U. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 8.03, art. 1503). https://shop.lgsbv.com/H365/DWN/sds_131503_en.pdf. Accessed October 16, 2026.
- Thermo Fisher Scientific. (2025). Safety data sheet: Ammonium iron(III) citrate (revision 6, ref. 211840000). https://www.fishersci.ie/store/msds?partNumber=10762505&productDescription%3D250GR+Ammonium+iron%28III%29+citrate%2C+16.5+to+18.5%25+Fe&countryCode=IE&language=en. Accessed October 16, 2026. 12
- American National Standards Institute. (n.d.). ANSI/ISEA Z87.1-2020: Current standard for safety glasses [Blog article]. https://blog.ansi.org/ansi-isea-z87-1-2020-safety-glasses-eye-protection/ Accessed October 24, 2026.
- Occupational Safety and Health Administration. (n.d.). 29 CFR 1910.133: Eye and face protection [Regulation summary]. NIOSH PPE-Info, Centers for Disease Control and Prevention. https://wwwn.cdc.gov/PPEInfo/Standards/Info/29CFR1910133 Accessed October 24, 2026.
- NoCry. (n.d.). NoCry clear safety glasses with anti-fog, scratch-resistant wraparound lenses [Product listing, Amazon.com, ASIN B07GB8Y11G]. Accessed October 24, 2026.
- International Programme on Chemical Safety (IPCS) and European Commission. (2002). ICSC 1132: Potassium ferricyanide [International Chemical Safety Card]. https://www.inchem.org/documents/icsc/icsc/eics1132.htm Accessed October 16, 2026. 12345
- Royal Society of Chemistry. (n.d.). The blueprint reaction. Education in Chemistry. https://edu.rsc.org/exhibition-chemistry/the-blueprint-reaction/3010606.article Accessed October 16, 2026.
- Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026.
- Panreac Química S.L.U. (2025). Safety data sheet: Acetic acid glacial (version 10.05, art. 1008). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/acetic-acid-panreac.pdf. Accessed October 16, 2026.
- Panreac Química S.L.U. (2025). Safety data sheet: Citric acid (version 9.04, item 1808). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/anhydrous-citric-acid-panreac.pdf. Accessed October 16, 2026.
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12
- National Oceanic and Atmospheric Administration. (n.d.). Ferric ammonium citrate. CAMEO Chemicals. https://cameochemicals.noaa.gov/chemical/3462 Accessed October 16, 2026. 12
- Jacquard Products. (n.d.). Cyanotype [Cyanotype Kit instruction booklet]. https://jacquardproducts.com/s/Cyanotype-Kit-INSTRUCTION-BOOKLET.pdf Accessed October 17, 2026. 12
- Chemos GmbH & Co. KG. (2024). Safety data sheet: Hydrogen peroxide solution 3% (version GHS 1.0, item A0272345). https://www.chemos.de/import/data/msds/GB_en/7722-84-1-A0272345-GB-en.pdf. Accessed October 16, 2026. 12
- AppliChem GmbH. (2025). Safety data sheet: Polysorbate 20 (version 6.14, art. A4974). https://pdf.dutscher.com/doc/348637/348637_FDSen.pdf. Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 16). Cyanotype chemicals: how to handle and store them safely. https://cyanocodex.com/en/safety/chemicals/