Skip to content
The Cyano Codex
Choose language

Why my cyanotype comes out yellow or greenish

If your cyanotype comes out with yellow or greenish whites right after washing, the most likely reason is that the wash was too short and unexposed iron salts remain. If the yellowing appears days or months later, the cause is something else: something alkaline has touched the blue. Here’s how to tell them apart and what to do.
Reviewed
Reading time
6 min
Sources
10

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Detail of a cyanotype of grass seed heads with the whites stained a greenish-yellow tone
Plate 1Whites with a greenish-yellow cast.

In short

  • Greenish-yellow whites after washing: unexposed salts remain, and you need to wash until the tint is gone.
  • If the print changes color as it dries, Jacquard attributes this to incomplete washing.
  • Late yellowing comes from something alkaline: phosphates, soap, buffered board or high-pH paint.
  • Alkaline damage doesn’t recover, unlike fading from light.
  • On yellow paper or fabric, cyanotype comes out green: the blue is transparent, like a dye.
On this page (5 sections)
  1. Why does my cyanotype come out yellow?
  2. Greenish-yellow whites right after washing
  3. When it yellows days or months later
  4. Why does my cyanotype come out green?
  5. How to keep it from happening again

Why does my cyanotype come out yellow?#

A cyanotype comes out yellow for two reasons, which you can tell apart by when it happens. If the whites have a greenish-yellow tint right after washing, unexposed iron salts remain and the wash was too short1. If it yellows days or months later, something alkaline has touched the blue2.

There’s a third, less common possibility: that the paper was already green or blue before exposure, which is a different problem, fogging. All print problems, each with its most likely cause, are sorted in common cyanotype problems.

Swipe to see more columns

When the yellow appears and what it means
When it appears What you see Likely cause What to do Source
Right after washing Whites with a greenish-yellow tint Insufficient washing Wash again until it’s gone 1
While it dries The print changes color Incomplete washing, according to the manufacturer Wash it again 2
Days or months later The blue yellows or loses strength Contact with something alkaline Remove the cause; the damage doesn’t recover 3
Before exposure The coated paper was already green or blue Chemical fog Discard that paper 4

Greenish-yellow whites right after washing#

The greenish-yellow tint in the whites is the color of iron salts that got no light and that the water hasn’t yet carried away. The National Science and Media Museum says to wash until that iron salt stain is completely gone1. For his New Cyanotype, Ware washes for about 20 minutes in gently running water4.

Ware also notes that stained whites are common, due to insufficient rinsing and because the blue bleeds into them4. The sources agree more on the criterion for calling a wash done, that the water runs clear and the tint is gone, than on the minutes2.

The fix is simple: wash the print again until the tint has completely gone. It’s one of the few problems you can correct afterward. How long to wash without losing blue along the way is explained in developing cyanotypes.

What if it changes color as it dries?#

The blue darkening a little as it dries is normal: it finishes forming with oxygen from the air, in about 24 hours according to Ware5. What isn’t normal is yellow or greenish tones appearing as it dries, which Jacquard attributes to incomplete washing2.

When it yellows days or months later#

If a print that came out clean yellows over time, the culprit is almost always something alkaline. Prussian blue is fairly stable in neutral or acidic conditions, but alkaline materials break it down quickly by hydrolysis, meaning the alkali breaks down the pigment6. What’s left is a yellowish iron compound3.

Ware sums it up this way: any substance with an alkaline pH, that is, above 7, bleaches a cyanotype, and the damage becomes irreversible as that compound ages3. These are the most common sources of alkali:

Where the alkali comes from
Where the alkali comes from What the sources say Source
Detergents and soap Jacquard attributes fading to brown or yellow to phosphates, soap or dirty objects 2
High-pH solutions They can yellow the print 7
Papers, envelopes and boards with an alkaline buffer Calcium carbonate damages cyanotype on direct contact 3
High-pH paints or dyes The blue underneath can weaken or disappear 7
Hard or alkaline water Degrades the image during washing 4

With archival papers there’s a nuance: Ware considers that calcium carbonate migrates poorly through paper, although he still recommends unbuffered materials3. The American Institute for Conservation’s exhibition guidelines are unequivocal: nothing buffered next to a cyanotype8. And an “acid-free” label doesn’t guarantee that a material is safe for photographs9.

For garments, Jacquard says to wash by hand, in cold water and with phosphate-free detergent, and warns that sweat, oil from your hands and overwashing also cause fading7. Which materials to avoid when storing or framing is in alkaline buffer and cyanotype.

Can you remove the yellow?#

Yellow from a short wash, yes: just wash again. Yellow from an alkali, no: Ware considers it irreversible3, unlike fading from light, which recovers in the dark3. We haven’t found any sourced home treatment that restores the blue to a print yellowed by an alkali. What helps is removing the cause.

Why does my cyanotype come out green?#

A cyanotype comes out green for three reasons. The greenish-yellow tint of a short wash is left in the whites1. It has just been exposed and not yet washed: in Ware’s formulas, the light areas look green4. Or it was made on a yellow support, because the blue adds to the color underneath7.

The colored support case is the most curious. Jacquard explains that cyanotype is transparent, like a dye: on yellow it comes out green, on red it comes out purple and on black it doesn’t show7. On old paper or a printed fabric, the green may simply be the two colors combined.

How to keep it from happening again#

Five habits cover almost every case of this problem:

  1. Wash all the way. Keep going until the greenish-yellow tint has gone from the whites1.
  2. Look at the coated paper. It should dry yellow; Herschel already called for a solution of a strength such that the paper dried yellow and not brown10. If you mix your own, follow a sourced cyanotype formula.
  3. Store it away from alkalis. Unbuffered paper and board, never just any board8.
  4. Wash garments carefully. By hand, in cold water and without phosphates7.
  5. Test before painting on top. Jacquard warns that a high-pH paint or dye can weaken the blue7; test them first on a test print.

If the yellow appears in isolated spots rather than across the whole print, see spots in cyanotype. And if you’re not sure when it appeared, troubleshoot your print starting from “Comes out yellow or greenish.”

Frequently asked questions

Why don’t the whites in my cyanotype stay white?

If they have a greenish-yellow tint, the wash was too short: iron salts that got no light remain, and washing again is enough. If they have a bluish tone, it’s a different problem, fogging, which usually comes from coated paper that fogged before exposure. In that second case, Mike Ware advises discarding the paper.

Can detergent turn a cyanotype T-shirt yellow?

Yes. Jacquard attributes yellowing to phosphates and high-pH solutions, and says to wash garments by hand, in cold water and with phosphate-free detergent. It also warns that sweat, oil from your hands and overwashing discolor the image. And damage from an alkali, according to Mike Ware, doesn’t recover.

Can an ordinary paper envelope yellow a cyanotype?

It can, if the paper or board contains an alkaline buffer, the calcium carbonate added to many archival papers. Mike Ware considers that it damages cyanotype on direct contact, although it migrates poorly through paper. For storage, conservation guidelines call for unbuffered paper, and an “acid-free” label doesn’t guarantee that.

Is it normal for a cyanotype to look greenish when it comes out of the sun?

Yes. During exposure, the image changes color: in Mike Ware’s formulas, the light areas look green, the midtones blue and the deepest shadows a pale bluish gray. That isn’t how it will end up, because the blue appears in the wash and finishes darkening as it dries.

Your next step

Wash the print until the whites are cleanHow to develop a cyanotype: washing in water, how long, optional acid bath, hydrogen peroxide and the 24 hours of oxidation, with what each source says.

Sources

  1. National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026. 12345
  2. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 12345
  3. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2–18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 1234567
  4. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 12345
  5. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026.
  6. Stulik, D. C. and Kaplan, A. (2013). Cyanotype. In The atlas of analytical signatures of photographic processes. Getty Conservation Institute. https://www.getty.edu/conservation/publications_resources/pdf_publications/pdf/atlas_cyanotype.pdf
  7. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 1234567
  8. American Institute for Conservation, Photographic Materials Group. (2004). Exhibition guidelines for photographic materials: Section 1.5.4 Matting, backboards, and support materials (S. Watkins, comp.). Photographic Materials Conservation Catalog. https://aic.wikiworks.com/wiki/PMG_Section_1.5.4_Matting,_Backboards,_and_Support_Materials Accessed October 16, 2026. 12
  9. Northeast Document Conservation Center. (2018). Storage enclosures for photographic materials (Preservation Leaflet 5.6). https://www.nedcc.org/free-resources/preservation-leaflets/5.-photographs/5.6-storage-enclosures-for-photographic-materials Accessed October 17, 2026.
  10. Herschel, J. F. W. (1842). On the action of the rays of the solar spectrum on vegetable colours, and on some new photographic processes. Philosophical Transactions of the Royal Society of London, 132, 181-214. https://doi.org/10.1098/rstl.1842.0013

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.