How long cyanotype solution lasts and how to store it
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- Kept separate, the solutions last for months: Jacquard gives at least 6 months to 1 year.
- The mixture doesn’t last long: days according to Ware, and 2 to 4 hours according to Jacquard.
- Citrate solution can grow mold within one or two weeks.
- A mixture that turns from yellow to dark blue has gone bad.
- Store them separately, in brown bottles, closed, labeled and in the dark.
- Leftover solution doesn’t go down the drain: closed, labeled container, taken to your local hazardous waste collection point.
On this page (6 sections)
How long does cyanotype solution last?#
Cyanotype solution lasts much longer kept separate than mixed. For its kit, Jacquard gives Solutions A and B at least 6 months to 1 year kept separate, and the mixture only a few hours1. Mike Ware says the mixture of his traditional formula doesn’t last long: days2.
How to make each solution is in the cyanotype formula, and why the mixture reacts to light, in how cyanotype works. Here we focus on the timeframes, how to extend them and the signs that something has gone bad.
| Format | How long it lasts | Source |
|---|---|---|
| Powdered reagents | We haven’t found a timeframe: the safety data sheets call for a closed container, a dry place and protection from light | 3,4 |
| Solutions A and B kept separate, classic formula | At least 6 months to 1 year, according to Jacquard for its kit; Ware gives no timeframe and keeps them in brown bottles in the dark | 1,2 |
| Mixed A and B, classic formula | Days, according to Ware; 2 to 4 hours, according to Jacquard | 2,5 |
| Citrate solution on its own | Can grow mold within one or two weeks | 2 |
| New Cyanotype with dichromate | At least 1 year, in his 2009 notes, or at least 4–5 years, on his website, according to Ware | 6,7 |
| New Cyanotype without dichromate | Can drop to a few months, according to Ware | 8 |
| Simple Cyanotype, one bottle | Several weeks at room temperature; much longer in the fridge, at about 5 °C | 9 |
| Simple Cyanotype, two bottles | Stock solutions, indefinitely; mixture, a few weeks or even days | 9 |
| What you’ll hear | What the sources say | Source |
|---|---|---|
| The mixture lasts one or two hours | The sources disagree, but none of those we consulted gives that figure: Ware talks about days and Jacquard about 2 to 4 hours for the one in its kit | 2,5 |
| The separate solutions last “weeks” or “as long as the salts” | Jacquard gives the ones in its kit at least 6 months to 1 year; Ware gives no timeframe for the classic formula | 1,2 |
| New Cyanotype without dichromate lasts 6 months to 1 year | Ware says that, without dichromate, its life can drop to a few months; we don’t give a more precise figure | 8 |
Ware is talking about his formula, made with laboratory reagents, and Jacquard about the sensitizer in its kit; we haven’t found a documented explanation for the difference. The cautious rule is the shorter one: mix fresh each session.
Why should you mix only what you’ll use?#
You should mix only what you’ll use because the mixture is the fragile part of cyanotype chemistry. It lasts days according to Ware and a few hours according to Jacquard, while each solution kept separate holds up for months2,1. Mixing fresh each session wastes less and keeps you from working with a mixture that has gone bad.
The mixture also responds to light. Wherever ultraviolet reaches it, the iron in the citrate changes and forms Prussian blue10. That’s why Mike Ware mixes it under dim tungsten light, with no fluorescent lights or daylight6. A beaker of mixture forgotten by a window is not a good idea.
How should you store cyanotype solution?#
Cyanotype solution is stored with the two parts separate, each in its own brown glass bottle, closed and in the dark, as Mike Ware does2. Label each bottle with the reagent name and the date, and keep it away from acids, from food and out of reach of children.
Safety: Store chemicals and solutions tightly closed, labeled, in dark glass, away from acids and out of the reach of children. More on safety
The powdered reagents need the same. Ferricyanide should be kept tightly closed, dry, separate from acids, away from food and protected from light, in amber glass according to Sigma-Aldrich3. Citrate, in a cool, dry, ventilated place protected from light4. Since it absorbs moisture from the air, the seal matters even more in its case7.
What about the fridge? Ware mentions it only for his Simple Cyanotype, which lasts much longer at about 5 °C9. For the classic formula, we haven’t found a source that recommends it or advises against it. If you use one, make it a studio fridge, never the one you keep food in.
To prevent mold in the citrate solution, Ware adds a few crystals of thymol, and warns that thymol is a harmful substance2. Other remedies that get passed around, with preservatives or alcohol, we haven’t been able to confirm in reliable sources, so we don’t give them. The rest of the storage precautions are in how to store reagents safely.
Signs that the solution has gone bad#
A cyanotype solution that has gone bad usually gives itself away by its color or appearance. There are three signs backed by sources: mold in the citrate solution, a mixture that turns from yellow to dark blue, and paper that turns green or blue before exposure2,9,6.
| Sign | What it means | What to do |
|---|---|---|
| Visible mold in the citrate solution | Mold: that solution is a good food source for it7 | No source says whether it can be filtered and used again: make a new one, or test it on a strip first |
| The mixture turns from yellow to dark blue | It has decomposed; Ware describes this for his Simple Cyanotype9 | Dispose of it as waste and make a fresh mixture |
| Coated paper turns green or blue before exposure | Chemical fog: the coating has reacted without light and the whites will come out fogged6 | Discard the sheet, as Ware advises, and check the paper7 |
The color sign follows simple logic. A healthy mixture is yellow, and blue is the color of the image pigment. If blue appears in the bottle or on the paper before exposure, the chemistry has reacted too early9.
What if the mixture turns blue right after you make it?#
If the mixture turns blue right after you make it, suspect the light first. The sources we consulted don’t cover this specific case, but the mixture forms Prussian blue wherever ultraviolet reaches it10, which is why it’s mixed under dim light, without sun or fluorescent lights6. Check the light and try again with clean bottles and a clean beaker.
If the problem shows up not in the bottle but in the print, the Troubleshooter helps you find the cause from what you see on the paper.
What to do with expired or leftover solution?#
Expired or leftover solution doesn’t go down the drain: ferricyanide safety data sheets say not to let it into sewers or drains11. Keep it in a closed, labeled container and take it to your local hazardous waste collection point, the facility where residents drop off waste that isn’t picked up at home; check first with your local council how they accept it12.
Safety: Keep leftover solution and the first wash bath in a closed, labeled container for your local hazardous waste collection point; later rinses can go down the drain with plenty of water. More on safety
The full procedure, including for wash water, is in how to dispose of cyanotype waste.
How long does coated paper last?#
Coated paper lasts less time than the solution. Mike Ware advises using it within hours of preparing it and adds that it keeps longer in a cool, dark, dry container9. We haven’t found a timeframe in days for homemade coated paper in reliable sources.
We explain it in detail in how long coated paper lasts.
Frequently asked questions
Can you store mixed cyanotype solution in the fridge?
Mike Ware mentions the fridge only for his Simple Cyanotype, which keeps much longer at about 5 °C. For the classic formula, we haven’t found a source that recommends it or advises against it. If you use one, make it a studio fridge, never the one you keep food in, with the bottles closed and labeled.
Do powdered reagents expire?
We haven’t found an expiration timeframe in reliable sources for powdered ferricyanide or citrate. What their safety data sheets do call for are conditions: a tightly closed container, a cool, dry place, protection from light and, for ferricyanide, distance from acids. Citrate absorbs moisture, so the seal is what matters most.
Can I use a citrate solution that has mold in it?
None of the sources we consulted says whether it can be filtered and used again, so we don’t give that recipe. The cautious approach is to make a new solution or, at the very least, test the old one on a strip before spending it on a print. To prevent it, Mike Ware adds a few crystals of thymol, and warns that it is a harmful substance.
Why doesn’t citrate solution last as long as ferricyanide solution?
Because ferric ammonium citrate solution is a good food source for mold, which can appear within one or two weeks, according to Mike Ware. Citrate also absorbs moisture from the air. That’s why it’s best to make citrate solution in amounts you’ll use up soon and keep it tightly closed and in the dark.
Your next step
Sources
- Jacquard Products. (n.d.). Cyanotype [Cyanotype Kit instruction booklet]. https://jacquardproducts.com/s/Cyanotype-Kit-INSTRUCTION-BOOKLET.pdf Accessed October 17, 2026. 1234
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 12345678910
- Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026. 12
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026. 12
- Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 12
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 12345
- Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 1234
- Ware, M. (n.d.). Towards an unproblematic cyanotype chemistry. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/tocyan.html Accessed October 16, 2026. 12
- Ware, M. (2022). Alternative photographic processes: Simple Cyanotype [PDF instructions]. https://mikeware.co.uk/downloads/SimpleCy22.pdf Accessed October 16, 2026. 1234567
- Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018 12
- Thermo Fisher (Kandel) GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (revision 5, ref. A16946). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/potassium-hexacyanoferrate-iii-fisher-scientific.pdf. Accessed October 16, 2026.
- Administración General del Estado. (2026). Eliminación de residuos domésticos. Punto de Acceso General (administracion.gob.es). https://administracion.gob.es/pag_Home/Tu-espacio-europeo/derechos-obligaciones/ciudadanos/consumidores/conexion-servicios/residuos.html Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 16). How long cyanotype solution lasts and how to store it. https://cyanocodex.com/en/chemistry/shelf-life/