Potassium ferricyanide or ferrocyanide: which one cyanotype uses and why
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- Classic cyanotype uses potassium ferricyanide, K₃[Fe(CN)₆], which is red and has CAS number 13746-66-2.
- Potassium ferrocyanide, or yellow prussiate, is a different compound: pale yellow, CAS 14459-95-1.
- On the label, (III) and red mean ferricyanide; (II) and yellow, ferrocyanide.
- With ferrocyanide, citrate-coated paper darkens on its own and doesn’t give the blue negative image.
- The confusion already appears in two manuals from 1843 and 1857.
On this page (5 sections)
Ferricyanide or ferrocyanide: which goes into cyanotype?#
Classic cyanotype uses potassium ferricyanide, the red salt with the formula K₃[Fe(CN)₆], mixed with ferric ammonium citrate1. Potassium ferrocyanide, known as yellow prussiate, is a different compound, and Herschel already described it in 1842 as much less sensitive to light2.
How each chemical works is explained in the chemistry of cyanotype, and everything you need to know about the right chemical, from risks to buying, is in potassium ferricyanide. This page deals with just one thing: not mixing them up.
Herschel noted that ordinary yellow ferrocyanide is far less sensitive to photographic action2
| Potassium ferricyanide | Potassium ferrocyanide | |
|---|---|---|
| Other names | Red prussiate of potash, or simply red prussiate3 | Yellow prussiate2 |
| Chemical name | Potassium hexacyanoferrate(III)4 | Potassium hexacyanoferrate(II); sold as the trihydrate5 |
| Formula | K₃[Fe(CN)₆]4 | K₄[Fe(CN)₆]·3H₂O5 |
| Iron state | Iron(III) | Iron(II) |
| Color | Red4 | Pale yellow5 |
| CAS number | 13746-66-24 | 14459-95-15 |
| Molar mass | 329.24 g/mol4 | 422.39 g/mol5 |
| In classic cyanotype | Yes: it’s one of the two chemicals1 | No: it doesn’t give the blue negative image2 |
How do you tell them apart on the label?#
Ferricyanide and ferrocyanide can be told apart on the label by three clues: the Roman numeral, the color and the CAS number. If it says (III), the crystals are red and the CAS is 13746-66-2, it’s ferricyanide, the one for cyanotype. If it says (II), it’s pale yellow and the CAS is 14459-95-1, it’s ferrocyanide4,5.
The Roman numeral indicates the state of the iron inside the complex: iron(III) in ferricyanide and iron(II) in ferrocyanide4,5. That’s why ferrocyanide needs one more potassium to balance the charge, and its formula starts with K₄ instead of K₃. In English the trap is the same single letter: ferricyanide versus ferrocyanide.
The CAS number is the most reliable test, because it’s a unique registry number for each substance and doesn’t depend on language or translation. Sigma-Aldrich, for example, sells ferrocyanide in its trihydrate form, with CAS 14459-95-15. If you find a different number next to the word “ferrocyanide,” it’s still not the one for cyanotype.
What happens if you use ferrocyanide instead of ferricyanide?#
If you use ferrocyanide you don’t get classic cyanotype. Herschel tried it in 1842 on paper coated with ferric ammonium citrate2. The paper immediately took on a violet color that darkened to almost black as it dried, and it behaved like a positive paper, not like cyanotype’s blue negative2.
Herschel described it as a highly sensitive positive photographic paper2, but, according to Mike Ware, he didn’t consider the process useful in practice6. Exactly why it happens, and through which reaction, we don’t go into: the sources we consulted describe the result, not the mechanism.
The practical step is to check before you dissolve anything. Look at the color of the crystals and the CAS number on the container; if in doubt, don’t mix it with the citrate until you’ve confirmed what you have.
| What you’ll hear | What the sources say | Source |
|---|---|---|
| Classic cyanotype recipes with “potassium ferrocyanide” | The reference formula uses potassium ferricyanide, K₃[Fe(CN)₆] | 1 |
| Ferrocyanide works the same, just more slowly | Herschel described it as much less sensitive and, on citrate-coated paper, it gave a positive paper that darkens on its own | 2 |
| The cyanotype pigment is ferricyanide | The pigment is ferric ferrocyanide: iron(III) hexacyanoferrate(II) | 7 |
Why are they so often confused?#
Ferricyanide and ferrocyanide get confused for three reasons: their names differ by only one letter, the cyanotype pigment is called ferric ferrocyanide, and the mistake is old. In 1843 and in 1857, two manuals were already describing cyanotype with yellow prussiate, that is, ferrocyanide6.
One letter and two states of iron#
In the two names, “ferri-” corresponds to iron(III) and “ferro-” to iron(II), as their chemical names show4,5. It’s a one-letter difference, in Spanish and in English, and one slip when copying or translating a recipe is enough to switch compounds.
The pigment has “ferro” in its name#
Chemically, Prussian blue is iron(III) hexacyanoferrate(II), also called ferric ferrocyanide7. In other words: you buy potassium ferricyanide, light changes the iron in the citrate, and what remains in the paper is a ferric ferrocyanide8. Anyone who reads that the blue in cyanotype is a ferrocyanide can easily assume that’s the chemical to use, and it isn’t. We go into more detail in Prussian blue.
A mistake more than 180 years old#
The confusion is almost as old as the technique. In 1843 George Fisher’s manual called for a bath of the common yellow ferrocyanate of potash to prepare the paper6. Mike Ware devotes an entire section of his history of cyanotype to these misunderstandings of Herschel’s processes6.
| Year | What happened | Source |
|---|---|---|
| 1842 | Herschel describes processes with both compounds and calls both by names beginning with “ferro” | 2 |
| 1843 | George Fisher’s manual describes cyanotype with yellow prussiate | 6 |
| 1857 | Robert Hunt limits his description of cyanotype to the positive process with ferrocyanide | 6 |
| Today | Many Spanish-language recipes still write “ferrocianuro” for “ferricianuro” | — |
The names of the day didn’t help either. Herschel called ferricyanide ferrosesquicyanuret and ferrocyanide ferrocyanuret2. And in his 1842 paper he described processes with both compounds, including a positive one with ferrocyanide that he himself didn’t recommend6.
What do I do if I bought ferrocyanide by mistake?#
If you bought ferrocyanide by mistake, don’t use it in the classic formula and don’t pour it down the drain. The ATSDR states that the ferrocyanide complex isn’t readily biodegradable and that, dissolved in water, it can release free cyanide in sunlight9. Keep it closed and labeled until you take it to a hazardous waste collection point.
In Spain, puntos limpios are the drop-off centers where households take waste that isn’t collected at home, and since 2025 household hazardous waste must be collected separately10. Check first with your collection point or your local council how they accept it. Everything else about chemical leftovers is in how to dispose of cyanotype waste.
The name mix-up is one of the ones we cover, along with others that circulate, in cyanotype myths.
Frequently asked questions
Can you use yellow prussiate to make cyanotypes?
Not for classic cyanotype. Yellow prussiate is potassium ferrocyanide, and the classic formula calls for ferricyanide, red prussiate. Herschel tried the yellow salt on paper coated with ferric ammonium citrate and the paper darkened on its own as it dried: it gave a positive paper, not the blue negative image you want in a cyanotype.
What do the (II) and (III) on the label mean?
They indicate the state of the iron inside the complex of iron and cyano groups. Potassium hexacyanoferrate(III), with iron(III), is ferricyanide, the one cyanotype uses. Hexacyanoferrate(II), with iron(II), is ferrocyanide, a different compound. That’s why the Roman numeral, together with the color and the CAS number, is the surest way to tell them apart.
My recipe says “potassium ferrocyanide”: is it wrong?
If it’s a classic cyanotype recipe with ferric ammonium citrate, the correct chemical is potassium ferricyanide, red, with CAS number 13746-66-2. It’s a very common naming mistake in Spanish. Use ferricyanide and take the quantities from a verified source, because a recipe that gets the chemical wrong may get other things wrong too.
Is Prussian blue a ferricyanide or a ferrocyanide?
Chemically it’s a ferrocyanide: iron(III) hexacyanoferrate(II), also called ferric ferrocyanide. That’s one of the reasons for the confusion, because the chemical you buy for cyanotype is potassium ferricyanide, while the pigment left in the paper has “ferro” in its name.
Your next step
Sources
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 123
- Herschel, J. F. W. (1842). On the action of the rays of the solar spectrum on vegetable colours, and on some new photographic processes. Philosophical Transactions of the Royal Society of London, 132, 181-214. https://doi.org/10.1098/rstl.1842.0013 Cited: art. 208, art. 209. 12345678910
- TCI Chemicals. (n.d.). Potassium hexacyanoferrate(III) (product P1979) [Product page]. https://www.tcichemicals.com/OP/en/p/P1979 Accessed October 17, 2026.
- Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(III) (version 7.1, product 455946). https://www.sigmaaldrich.com/sds/aldrich/455946. Accessed October 17, 2026. 12345678
- Sigma-Aldrich. (2026). Safety data sheet: Potassium hexacyanoferrate(II) trihydrate (version 6.12, product 455989). https://www.sigmaaldrich.com/sds/aldrich/455989. Accessed October 17, 2026. 123456789
- Ware, M. (2014). Cyanomicon: History, science and art of cyanotype: Photographic printing in Prussian blue (revised and expanded ed.). https://www.mikeware.co.uk/mikeware/downloads.html Cited: pp. 35-36, pp. 37-38, p. 37, section 2.9, p. 38. 1234567
- Ware, M. (2008). Prussian blue: Artists' pigment and chemists' sponge. Journal of Chemical Education, 85(5), 612-621. https://doi.org/10.1021/ed085p612 12
- Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018
- Agency for Toxic Substances and Disease Registry. (n.d.). Toxicological profile for cyanide: Chapter 5. Potential for human exposure [Draft for public comment]. U.S. Department of Health and Human Services. https://www.atsdr.cdc.gov/ToxProfiles/tp8-c5.pdf Accessed October 16, 2026.
- Administración General del Estado. (2026). Eliminación de residuos domésticos. Punto de Acceso General (administracion.gob.es). https://administracion.gob.es/pag_Home/Tu-espacio-europeo/derechos-obligaciones/ciudadanos/consumidores/conexion-servicios/residuos.html Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 16). Potassium ferricyanide or ferrocyanide: which one cyanotype uses and why. https://cyanocodex.com/en/chemistry/potassium-ferrocyanide/