Ferric ammonium oxalate: what it is and why it needs more care
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- It is (NH₄)₃[Fe(C₂O₄)₃]·3H₂O, with CAS number 13268-42-3 and a molar mass of 428.06 g/mol.
- It is the light-sensitive reagent in New Cyanotype: 30 g per 100 ml of solution.
- Unlike citrate, it is sold with a defined formula and a stated purity of 98% or more.
- European safety data sheets classify it as harmful if swallowed and in contact with skin.
- It is sensitive to light and absorbs moisture: store it closed, dry and in the dark.
- It doesn’t go down the drain: leftovers go in a closed, labeled container to your local hazardous waste collection point.
On this page (7 sections)
What is ferric ammonium oxalate?#
Ferric ammonium oxalate, or ammonium iron(III) oxalate, is an iron salt that reacts to light. It is sold as the trihydrate, with the formula (NH₄)₃[Fe(C₂O₄)₃]·3H₂O, CAS number 13268-42-3 and a stated purity of 98% or more1. In cyanotype, it is the reagent in Mike Ware’s New Cyanotype2.
The CAS number is a substance’s international identifier, and it is the first thing to check on a bottle. How this reagent fits into the chemistry of the image is covered in cyanotype chemistry; this page is about the compound itself: what it is, how to read its label and why it needs more care than citrate.
| Fact | Value |
|---|---|
| Chemical name | Ammonium iron(III) oxalate trihydrate1 |
| In English | Ammonium iron(III) oxalate trihydrate, ammonium ferric oxalate or iron ammonium oxalate1,3 |
| Formula | (NH₄)₃[Fe(C₂O₄)₃]·3H₂O1 |
| CAS number | 13268-42-33 |
| EC number | 220-952-21 |
| Molar mass | 428.06 g/mol3 |
| Point | Yellowish-green crystals4 |
| Properties | Soluble in water, sensitive to light and hygroscopic, meaning it absorbs moisture from the air3 |
What is it used for in cyanotype?#
In cyanotype, ferric ammonium oxalate is used as the iron salt in New Cyanotype, the formula Mike Ware published in 1995: 30 g of oxalate and 10 g of potassium ferricyanide per 100 ml of solution2. It plays the role that ferric ammonium citrate plays in the classic formula: it is the salt that changes with light.
The advantage is consistency. Commercial ferric ammonium citrate has no fixed composition, and its iron content ranges from 14% to 28%5. Oxalate, by contrast, is sold as a compound with a defined formula and a stated purity1. Its solution also doesn’t grow mold, unlike citrate solution6.
Everything else that changes is in the preparation. When the New Cyanotype solutions are mixed, about 15 g of potassium ferric oxalate crystallizes out; the crystals are filtered off and take much of the potassium with them2. According to Ware, the result needs three stops less exposure than the classic formula, or about one eighth of the time5. The full method, without the dichromate in the original recipe, is in Mike Ware’s New Cyanotype.
How does it react to light?#
Ferric ammonium oxalate reacts to light because its iron(III) becomes iron(II) when the complex absorbs a photon. In general chemistry, iron(III) complexes with carboxylates, the family that includes citrate and oxalate, break down this way: an electron moves from the ligand to the iron7. That iron(II) is what then forms Prussian blue with the ferricyanide8.
The phenomenon was known before cyanotype. In 1831, Johann Wolfgang Döbereiner observed that light makes ferrous oxalate precipitate from a ferric oxalate solution9, a precedent Herschel was aware of.
Why does it need more care than citrate?#
Ferric ammonium oxalate needs more care than citrate because European safety data sheets classify it as harmful if swallowed and in contact with skin: acute toxicity category 4 by the oral and dermal routes, with hazard statements H302 and H312 and the signal word “Warning”12,1.
In their official wording, those statements read “Harmful if swallowed” and “Harmful in contact with skin”13. They carry the exclamation mark pictogram, GHS07, which covers, among other things, acute toxicity category 414. Ferric ammonium citrate, by contrast, is classified as a skin, eye and respiratory irritant, or given no pictograms at all, depending on the manufacturer15,16.
| Ferric ammonium citrate | Ferric ammonium oxalate | |
|---|---|---|
| Formula | Variable composition5 | (NH₄)₃[Fe(C₂O₄)₃]·3H₂O1 |
| Classification | Irritant (H315, H319, H335) according to Jacquard; no pictograms according to Sigma-Aldrich15,16 | Harmful if swallowed and in contact with skin (H302 + H312)12 |
| Signal word | “Warning” on the Jacquard sheet15 | “Warning”12 |
| Formula it’s used in | Classic | New Cyanotype |
Ware sums it up from the workshop: the New Cyanotype sensitizer is more toxic if swallowed than traditional cyanotype sensitizer and stains skin, clothing and any absorbent surface6. A commercial mixture of this type is also classified as harmful if swallowed, with the acid warning EUH03217.
| What you’ll hear | What the sources say | Source |
|---|---|---|
| All safety data sheets classify the oxalate the same way | The European sheets we consulted agree on H302 + H312; a Japanese sheet, with a different CAS number (14221-47-7), classifies it instead as a skin, eye and respiratory irritant. We follow the European one and add safety glasses because of the Japanese one | 12,4 |
| The leftover crystals from New Cyanotype go down the drain | That’s what Ware suggests; the safety data sheet for ferric ammonium oxalate, however, treats its leftovers as hazardous waste that doesn’t go down the drain, and that’s the approach we follow for the crystals too | 2,12 |
How to work with ferric ammonium oxalate#
Work with oxalate as you would with any reagent that is harmful in contact with skin: gloves from the moment you open the bottle until the print is washed, safety glasses when weighing and dissolving, and never with children or in the classroom. Among its precautionary statements, the Sigma-Aldrich sheet lists P280 (wear gloves and protection) and P302 + P352 + P312 (what to do if it gets on your skin)1.
Safety: The oxalate in New Cyanotype is harmful if swallowed and in contact with skin: always wear gloves, and never work with it around children. More on safety
- When weighing it, work slowly and away from drafts so you don’t raise dust; the Japanese sheet also classifies it as an eye and respiratory irritant4.
- When storing it, keep it in its container, tightly closed, dry and in the dark, because it is sensitive to light and hygroscopic3. The Thermo Fisher sheet says to keep it away from humid air and direct sunlight, and lists it as incompatible with strong oxidizers and strong acids12.
- Away from fire. Sigma-Aldrich puts it in the storage class for combustible solids1, and when it decomposes it gives off carbon monoxide, carbon dioxide and nitrogen oxides4.
- Nothing down the drain. The Thermo Fisher sheet treats it as hazardous waste12: leftovers go in a closed, labeled container to your local hazardous waste collection point18.
Precautions for the whole formula, including the ferricyanide and the hot water used to make it up, are in safety for variants and toning. How to read a safety data sheet from start to finish is in how to read a safety data sheet.
What to check on the oxalate label#
On a ferric ammonium oxalate label, check four things: the full name, with “ammonium”; CAS number 13268-42-3, the one for the trihydrate; a purity of 98% or more; and the pictogram with hazard statements H302 and H3123,1. If the container doesn’t identify the manufacturer or point to its safety data sheet, don’t buy it.
Two mix-ups are common. The first is with potassium ferric oxalate, the compound in the crystals that separate out when New Cyanotype is made up2, not the one you buy. The second is with citrate: both are iron and ammonium salts, but you can’t simply swap one for the other in a recipe.
You may see a different CAS number. A Japanese sheet gives 14221-47-7 for a product with the same name4. If that’s the one you see, check the sheet for which form it is and what hazard classification the manufacturer gives it.
Where can you buy ferric ammonium oxalate?#
Ferric ammonium oxalate is sold as a laboratory reagent, through chemical suppliers and some alternative photographic process shops. We don’t link to any on this site: our selection doesn’t include a product that meets the label and safety data sheet criteria on this page.
New Cyanotype takes 30 g per 100 ml of solution2, so a small container is enough to start. Before you buy it, decide whether you really need it: for most work, the classic cyanotype formula uses lower-risk reagents.
Frequently asked questions
Is ferric ammonium oxalate toxic?
European safety data sheets classify it as harmful if swallowed and in contact with skin, with acute toxicity category 4, the one that carries the exclamation mark. That’s a greater hazard than ferric ammonium citrate, which is classified as an irritant or given no pictograms, depending on the manufacturer. That’s why you always wear gloves and never use it with children.
Can I use oxalate instead of citrate in the classic formula?
We haven’t found a source that gives a direct substitution. Oxalate is the basis of Mike Ware’s New Cyanotype, a formula in its own right, with different amounts and a preparation in which crystals are separated out. If you want to work with oxalate, follow that complete formula and its safety data sheet, not an improvised mixture.
What’s the difference between ferric ammonium oxalate and potassium ferric oxalate?
The ammonium salt is the reagent you buy for New Cyanotype. The potassium salt appears when you make it up: according to Mike Ware, when the solutions are mixed and left to cool, about 15 g of potassium ferric oxalate crystallizes out and is filtered off and removed.
How should you store ferric ammonium oxalate?
In its container, tightly closed, dry and in the dark, because it is sensitive to light and absorbs moisture. Away from oxidizers and strong acids, which its safety data sheet lists as incompatible, and away from food and drink. A Japanese sheet also recommends storing it in glass and under lock and key.
Your next step
Sources
- Sigma-Aldrich. (n.d.). Ammonium iron(III) oxalate trihydrate (ref. 12302) [Product page]. https://perfqws.sigmaaldrich.com/CA/en/product/sial/12302. Accessed October 16, 2026. 1234567891011
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 123456
- Thermo Fisher Scientific. (n.d.). Ammonium iron(III) oxalate trihydrate, 98%, Thermo Scientific (ref. 11449377) [Product page]. Fisher Scientific. https://www.fishersci.ie/shop/products/ammonium-iron-iii-oxalate-trihydrate-98-thermo-scientific/11449377. Accessed October 17, 2026. 123456
- FUJIFILM Wako Pure Chemical Corporation. (2026). Safety data sheet: Iron(III) triammonium trioxalate trihydrate (revision 3.04; Japanese standard JIS Z 7253:2019). https://labchem-wako.fujifilm.com/sds/W01W0109-0082JGHEEN.pdf. Accessed October 18, 2026. 12345
- Ware, M. (n.d.). Towards an unproblematic cyanotype chemistry. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/tocyan.html Accessed October 16, 2026. 123
- Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 12
- Chaudhuri, A., Denkler, L. M., Zhuo, Q., Mandal, A. and Bunescu, A. (2025). LMCT-driven iron photocatalysis: Mechanistic insights and synthetic applications. Chemistry – A European Journal, 31(58), Article e02185. https://doi.org/10.1002/chem.202502185
- Sentoku, S., Kurashina, M. and Kida, K. (2025). Observation of blue particles formed by photosensitizing reaction on paper fibres of cyanotypes. Photochem, 5(3), Article 18. https://doi.org/10.3390/photochem5030018
- Ware, M. (1998). Herschel's cyanotype: Invention or discovery? History of Photography, 22(4), 371–379. https://doi.org/10.1080/03087298.1998.10443901
- Kuhn, H. J., Braslavsky, S. E. and Schmidt, R. (2004). Chemical actinometry (IUPAC Technical Report). Pure and Applied Chemistry, 76(12), 2105-2146. https://publications.iupac.org/pac/2004/7612/7612x2105.html
- Straub, S., Brünker, P., Lindner, J. and Vöhringer, P. (2018). Femtosecond infrared spectroscopy reveals the primary events of the ferrioxalate actinometer. Physical Chemistry Chemical Physics, 20(33), 21390–21403. https://doi.org/10.1039/C8CP03824D
- Thermo Fisher Scientific. (2025). Safety data sheet: Ammonium iron(III) oxalate trihydrate, 98% (revision 4, ref. 11449377). https://www.fishersci.ie/store/msds?partNumber=11449377&productDescription%3DAMMONIUM+IRON%28III%29+OXALATETRIHYDRATE%2C+98%25%2C100G&countryCode=IE&language=en. Accessed October 16, 2026. 1234567
- Comunidad de Madrid, Consejería de Sanidad. (2019). Indicaciones de peligro del Reglamento (CE) n.º 1272/2008 (CLP) [Compilation of the regulation’s annexes]. https://www.comunidad.madrid/sites/default/files/doc/sanidad/samb/indicaciones_de_peligro-clp_2019.pdf Accessed October 18, 2026.
- Bundesanstalt für Arbeitsschutz und Arbeitsmedizin. (n.d.). Hazard pictograms and signal words. BAuA. https://www.baua.de/EN/Topics/Chemicals-biological-agents/Hazardous-substances/Classification-and-labelling/Labelling-elements/Hazard-pictograms-and-signal-words Accessed October 18, 2026.
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026. 123
- Sigma-Aldrich. (n.d.). Ammonium iron(III) citrate, reagent grade (ref. F5879) [Product page]. https://www.sigmaaldrich.com/IT/it/product/sigald/f5879. Accessed October 16, 2026. 12
- Jay House Ltd. (2017). Safety data sheet: Cyanotype Sensitiser (version 2, Fotospeed brand). https://www.freestylephoto.com/static/pdf/msds/fotospeed/308510_SDS.pdf. Accessed October 16, 2026.
- Administración General del Estado. (2026). Eliminación de residuos domésticos. Punto de Acceso General (administracion.gob.es). https://administracion.gob.es/pag_Home/Tu-espacio-europeo/derechos-obligaciones/ciudadanos/consumidores/conexion-servicios/residuos.html Accessed October 16, 2026.
Reviewed on October 18, 2026. If you spot an error or a missing source, write to us and we’ll look into it.
How to cite this page
The Cyano Codex. (2026, October 18). Ferric ammonium oxalate: what it is and why it needs more care. https://cyanocodex.com/en/chemistry/ferric-ammonium-oxalate/