Skip to content
The Cyano Codex
Choose language

Cyanotype pillow cover

A pillow cover is a rewarding piece for cyanotype: it rarely gets washed, nobody sweats on it and it looks like a soft painting on the sofa. This project offers two routes, printing a ready-made cover or printing the front panel before sewing it, and a square composition with an umbel in the center.
Section
Fabric
Reviewed
Reading time
8 min
Sources
8
Level
Beginner (level 1 of 3)

As an Amazon Associate I earn from qualifying purchases. How we fund the site

Pillow with a cotton cover printed in cyanotype with a white umbel on blue
Plate 1A cyanotype pillow cover.
Time
One work session, plus drying in the dark and about 24 h until the final blue
Level
Beginner
Materials
11
Steps
6

In short

  • A cotton or linen cover, white or natural, works: these are fibers Jacquard accepts.
  • You can print a ready-made cover, with cardboard inside, or the front panel before you sew it.
  • Queen Anne’s lace and other umbellifers belong to the same family as parsnip: place them with gloves on.
  • Direct light lightens the blue, although it comes back in the dark with air: keep the pillow away from the window.
  • Who it’s for: adults and families, with an adult in charge of the chemistry.

Safety: Coat the fabric wearing nitrile gloves and old clothes: the solution stains skin and textiles. More on safety

Safety: With citrus, rue, fig, parsnip and other plants in the carrot family, wear gloves: their sap plus UV light can burn your skin. More on safety

Safety: When exposing in the sun, protect yourself as you would for any time outdoors: shade while you wait, UV-blocking sunglasses and sunscreen; don’t look at the sun. More on safety

Materials list

Check off what you already have on the table. The “Amazon” links are affiliate links.

What you need

Your check marks are saved only in this browser. No account needed.

On this page (4 sections)
  1. Before you start
  2. How to make the cover, step by step
    1. 1. Prepare the cover or the panel
    2. 2. Coat the central square
    3. 3. Compose with one large shape in the center
    4. 4. Expose to the sun
    5. 5. Rinse the cover
    6. 6. Dry in the shade and sew, if needed
  3. Variations
  4. Caring for the cover

Before you start#

This project uses the cyanotype on fabric technique, which covers the complete process and the reason behind each step; here you’ll find only what is specific to a pillow. Choose a cotton or linen cover or panel, white or natural, fibers that Jacquard accepts for its sensitizer1, and wash it first without fabric softener. Before you open the bottles, review safety with skin, textiles and plants.

First, choose your route. A ready-made cover is the quickest: a covered piece of cardboard inside stretches it and keeps the solution from soaking through to the back. A panel before sewing gives a cleaner result, because it stays flat during exposure and you choose the framing when you cut it: leave the seam allowance uncoated.

How to make the cover, step by step#

The cover takes six steps, from preparing the fabric to drying. The square format of a pillow calls for a different composition from a T-shirt or a tote bag: a single large shape in the center, with breathing room around it, works better than several small leaves.

  1. Step 1: Prepare the cover or the panel

    If it’s a ready-made cover, slide a piece of stiff, plastic-covered cardboard the size of the pillow inside and smooth out the front. If it’s a loose panel, pin it to a covered board, taut and free of folds. Either way, the surface has to lie flat so that the plant and the glass touch the fabric evenly2.

    How to tell it’s going well: the side you’re going to print is smooth and doesn’t shift on its support.

  2. Step 2: Coat the central square

    In dim light, mix the two solutions in equal parts just before use, because Jacquard gives the mixture a stability of 2 to 4 hours2. Spread the solution with the brush over a centered square, in crisscross strokes and without overloading, and leave an untreated margin around it: the brushed edges frame the print.

    Dry the cover flat and in the dark, as Jacquard specifies for fabric2. If you also coat a scrap of the same fabric, you can use it for the test strip.

    How to tell it’s going well: the square is even and, once dry, a pale, matte yellow.

    Safety: Wear safety glasses and nitrile gloves to mix and brush on the solution; if it splashes into your eyes, rinse with plenty of water for 15 minutes. More on safety

    Safety: Coat the fabric wearing nitrile gloves and old clothes: the solution stains skin and textiles. More on safety

  3. Step 3: Compose with one large shape in the center

    In the shade, wearing gloves and with dry hands, place the plant on the square. An open umbel in the center gives a radial composition that suits the format; a large leaf on the diagonal gives a more dynamic one. The plants must be pressed and dry: Jacquard asks for dry objects on the sensitive surface3, and Anna Atkins already noted that with thick specimens the impression came out imperfect4.

    If you use Queen Anne’s lace umbels, fig leaves or citrus, wear gloves to place them too: they belong to the plant families whose sap, in sunlight, can burn the skin5.

    How to tell it’s going well: the plant lies flat under the glass and is centered in the square.

    Safety: With citrus, rue, fig, parsnip and other plants in the carrot family, wear gloves: their sap plus UV light can burn your skin. More on safety

  4. Step 4: Expose to the sun

    Lay the glass on top, clip it in place and take the cover out into the sun, lying flat. Jacquard gives 1 to 30 minutes depending on conditions, without distinguishing between fabric and paper, and would rather you overexpose than underexpose2. If you have the scrap, expose it first in sections, doubling the time from one section to the next6.

    How to tell it’s going well: the exposed fabric looks bronze2 and the silhouette stays pale.

    Safety: When exposing in the sun, protect yourself as you would for any time outdoors: shade while you wait, UV-blocking sunglasses and sunscreen; don’t look at the sun. More on safety

  5. Step 5: Rinse the cover

    In the shade, remove the glass, the plant and the cardboard, and rinse the cover in clean water for at least 5 minutes, changing the water until it runs clear2. Don’t rub the printed area.

    How to tell it’s going well: the background is blue and no yellow tint remains in the silhouette.

    Safety: Keep leftover solution and the first wash bath in a closed, labeled container for your local hazardous waste collection point; later rinses can go down the drain with plenty of water. More on safety

  6. Step 6: Dry in the shade and sew, if needed

    Hang the cover or panel to dry in the shade, because Jacquard advises against drying its cyanotypes in direct sun3. Without hydrogen peroxide, the blue reaches its final tone in about 24 hours2. If you worked with a panel, sew it once it’s completely dry.

    How to tell it’s going well: the next day, the blue is darker and more even than when it came out of the water.

Variations#

A pillow also works with smaller or more graphic pieces without changing the technique. These three ideas suit a square format well.

If you’d prefer a piece you can take with you, the cyanotype tote bag uses the same technique on heavy cotton. To compare pretreated fabric with fabric you coat yourself, see fabric for cyanotype.

Caring for the cover#

A pillow cover is rarely washed, which helps it keep its blue. When it does need it, wash it by hand, in cold water and with a phosphate-free detergent, as Jacquard recommends, because phosphates and alkaline substances can turn the image yellow and overwashing lightens it1. A removable cover lets you wash it without getting the insert wet.

The other concern is light. Cyanotype fades in light, and the fading isn’t proportional to the dose: an hour of direct sun lightens it far more than the same amount of light received at a lower intensity8. In the dark, with air, the blue comes back: in Ware’s tests, at least 95% of it within a day8. A sofa out of direct sun is a better spot than the window seat. Washing is covered in full detail in how to wash a cyanotype T-shirt.

Frequently asked questions

Is it better to print a ready-made cover or sew it afterward?

Both options work. A ready-made cover is quicker: you slide a covered piece of cardboard inside and coat only the front. Sewing it afterward gives a cleaner result, because the panel stays flat during exposure and you can choose how the image is framed when you cut it. If you sew, leave the seam allowance uncoated.

Can I put the pillow next to a window?

Not in direct sun, ideally. Light fades cyanotype, and an hour of direct sun lightens it far more than the same amount of light received at a lower intensity. The blue comes back if you store the cover in the dark with air, but a spot out of direct sun keeps it from losing intensity every day.

Which plants look good on a pillow?

Ones with a clear shape at a large size: an open umbel, a fig leaf, a fern frond or a bunch of grass heads. Press them first so they lie flat. Umbels from the carrot family, fig and citrus can irritate the skin in sunlight: place them with gloves on.

How do you wash the cover?

As little as possible, by hand, in cold water and with a phosphate-free detergent, which is what Jacquard recommends for cyanotypes on fabric. Phosphates and alkaline substances can turn the image yellow, and overwashing lightens it. A removable cover lets you wash it without getting the insert wet.

Your next step

Wash the cover without losing the blueBy hand, cold, rarely and without phosphates: why alkaline detergents and overwashing lighten cyanotype on fabric, and what to do about washing machines and irons.

Sources

  1. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 123
  2. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 1234567
  3. Jacquard Products. (2015). Cyanotype tips and troubleshooting [Manufacturer document, version 6.01.15]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Tips_and_Troubleshooting.pdf Accessed October 16, 2026. 12
  4. Franchi, S. (2024). Crafting and collecting cyanotypes: Anna Atkins's Photographs of British Algae: Cyanotype Impressions. Literature Compass, 21(1-3), Article e12708. https://doi.org/10.1111/lic3.12708
  5. Grosu Dumitrescu, C., Jîjie, A.-R., Manea, H. C., Moacă, E.-A., Iftode, A., Minda, D., Chioibaş, R., Dehelean, C.-A. and Vlad, C. S. (2024). New insights concerning phytophotodermatitis induced by phototoxic plants. Life, 14(8), Article 1019. https://doi.org/10.3390/life14081019
  6. Ilford Photo. (2017, March 30). Making a black & white print: Exposure testing. https://www.ilfordphoto.com/exposure-testing/ Accessed October 16, 2026.
  7. Jacquard Products. (n.d.). Cyanotype fabric sheets [Product page]. https://www.jacquardproducts.com/cyanotype-fabric-sheets Accessed October 16, 2026.
  8. Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 12

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.