Silk or cotton cyanotype scarf
As an Amazon Associate I earn from qualifying purchases. How we fund the site
- Time
- One work session, plus drying in the dark and about 24 h until the final blue
- Level
- Intermediate
- Materials
- 9
- Steps
- 6
In short
- Silk and cotton are among the fibers Jacquard accepts; polyester satin generally doesn’t work.
- With no binder, the fabric keeps its drape: that’s the advantage Bilvar, citing Ware, attributes to iron processes.
- Jacquard allows coating by brush or by dipping; dipped, the scarf soaks up the solution evenly.
- For a long piece, a board and two sheets of glass side by side keep everything in contact.
- A scarf touches your neck: wash it rarely, by hand, cold and without phosphates.
Safety: Coat the fabric wearing nitrile gloves and old clothes: the solution stains skin and textiles. More on safety
Safety: Wear safety glasses and nitrile gloves to mix and brush on the solution; if it splashes into your eyes, rinse with plenty of water for 15 minutes. More on safety
Safety: When exposing in the sun, protect yourself as you would for any time outdoors: shade while you wait, UV-blocking sunglasses and sunscreen; don’t look at the sun. More on safety
Materials list
Check off what you already have on the table. The “Amazon” links are affiliate links.
Your check marks are saved only in this browser. No account needed.
On this page (4 sections)
Before you start#
This project applies the cyanotype on fabric technique to a scarf; that page covers the complete process, with the reason behind each step. Also read how to work safely with skin and textiles first: in this project you dip the fabric, and the solution stains skin and clothing.
Silk and cotton are among the fibers Jacquard accepts for its sensitizer1. Bilvar, citing Mike Ware, explains that iron processes are considered the best suited to delicate fabrics because they don’t need a binder, such as gelatin or gum, that would change the drape of the fabric2. That’s exactly what a scarf needs. Check the label before you start: polyester generally doesn’t work1, and many “satins” are polyester. The other fibers are covered in which fabric works for cyanotype.
How to make the scarf, step by step#
The scarf takes six steps. What changes compared with other pieces is the size: decide beforehand whether you’re going to coat it all over, by dipping, or only one area, by brush, and prepare a board as long as the part you’re going to expose.
Step 1: Mix the solution and prepare the tray
In dim light, mix the two solutions in equal parts just before use; according to Jacquard, the mixture is stable for 2 to 4 hours3. If you’re going to dip the scarf, prepare more than you would for brushing an area: the whole fabric gets soaked. Pour it into a clean tray, kept just for the workshop, that is longer than the folded scarf.
How to tell it’s going well: the mix is clear and yellow, with no trace of blue.
Safety: Wear safety glasses and nitrile gloves to mix and brush on the solution; if it splashes into your eyes, rinse with plenty of water for 15 minutes. More on safety
Step 2: Coat the scarf, by dipping or by brush
Jacquard states that fabric can be painted with or dipped in the sensitizer3. Dipping: fold the scarf accordion-style, put it in the tray wearing gloves, turn it over so it soaks evenly and lift it out, letting it drain gently, without wringing the silk. By brush: pin it to a covered board and spread the solution over the design area in crisscross strokes.
How to tell it’s going well: the fabric is soaked and even, with no dry patches or puddles, and it hasn’t turned blue anywhere.
Safety: Coat the fabric wearing nitrile gloves and old clothes: the solution stains skin and textiles. More on safety
Step 3: Dry the scarf in the dark
Hang it or lay it out in a dim room until it is completely dry: Jacquard says to air-dry fabric in the dark3 and not to wet it before or during exposure4. If you hang it, put plastic underneath, because it will drip.
How to tell it’s going well: the dry fabric is an even, pale yellow, with no green or blue spots.
Step 4: Compose on a long board
In the shade, spread the scarf out on a long covered board and place the pressed grass heads, wearing gloves and with dry hands. A diagonal of grass heads running along the scarf follows its shape; grouped toward the ends, they leave the center plain blue, which is the part that shows when you tie it.
Cover the composition with two sheets of glass placed side by side and hold them with clips. The simplest way to get good contact is a flat surface with a heavy sheet of glass on top3; with a long piece, two sheets cover what one can’t. Anna Atkins herself noted that with thick specimens the glass didn’t press down firmly enough and the impression came out imperfect in places5.
How to tell it’s going well: the grass heads don’t move when you tilt the board.
Step 5: Expose to the sun
Take the board out into the sun, lying flat. Jacquard gives 1 to 30 minutes depending on conditions, without distinguishing between fabric and paper, and would rather you overexpose than underexpose3. If you have solution left over, also coat a scrap of the same fabric and expose it first in sections, doubling the time from one section to the next6.
How to tell it’s going well: the exposed fabric looks bronze3 and the grass heads leave their pale shadow.
Safety: When exposing in the sun, protect yourself as you would for any time outdoors: shade while you wait, UV-blocking sunglasses and sunscreen; don’t look at the sun. More on safety
Step 6: Rinse and dry in the shade
In the shade, remove the glass and the plants and rinse the scarf in clean water for at least 5 minutes, changing the water until it runs clear3. Move it through the water without rubbing. Hang it in the shade, because Jacquard advises against drying its cyanotypes in direct sun4; without hydrogen peroxide, the blue reaches its final tone in about 24 hours3.
How to tell it’s going well: the background is blue, the grass heads are white and the fabric keeps its drape.
Safety: Keep leftover solution and the first wash bath in a closed, labeled container for your local hazardous waste collection point; later rinses can go down the drain with plenty of water. More on safety
Variations#
With a scarf, you can also work with the shape of the fabric, not just with plants. These ideas don’t require any other chemistry.
- Just the ends. Dip only the ends of the scarf in the solution, to different depths: the rest will stay white, and the blue will have an irregular dip line along its edge.
- Folds and ties. Fold or tie the coated, dry scarf before exposing it: whatever stays inside the folds gets no light and will come out white, in lines or stars.
- No glass. With the grass heads held in place but no glass, the silhouettes come out soft, with blurred edges. Glass gives sharpness because it presses the plant against the fabric3.
- A pale-colored silk. Cyanotype is transparent and adds to the background: on a yellow silk, the blue comes out green1.
If you’d rather start with a simpler piece, the cyanotype tote bag is made on heavy, flat cotton. And if you’re looking for silk or fine cotton for your next scarf, compare options in fabric for cyanotype.
Caring for the scarf#
Wash the scarf rarely, by hand, in cold water and with a phosphate-free detergent: Jacquard warns that phosphates and alkaline substances can turn the image yellow and that overwashing lightens it1. A scarf touches your neck, and the manufacturer adds that sweat and skin oils can fade cyanotype4.
Store it folded in a drawer, away from the sun. All the details on detergents, washing machines and ironing are in how to wash a cyanotype T-shirt, and they apply to silk too, along with whatever the scarf’s care label says.
Frequently asked questions
Can you make a cyanotype on silk?
Yes. Silk is among the natural fibers Jacquard accepts for its sensitizer, and Bilvar, citing Mike Ware, explains that iron processes are considered the best suited to delicate fabrics. Check the label: many “satins” are polyester, which generally doesn’t work.
Is it better to coat the scarf by brush or by dipping?
It depends on the design. Dipped, the whole scarf soaks up the solution and the blue background comes out even, although it uses more solution. With a brush, you choose the area, leave brushed edges and can treat just the ends. Jacquard accepts both methods for fabric.
Can I expose the scarf without glass?
Yes, but the silhouettes will come out softer. Glass presses the plants against the fabric, and sharpness depends on that contact. Without it, the grass heads lift slightly and light creeps underneath, giving soft-edged shadows. It’s a valid effect if that’s what you want; on a windy day, hold the plants down so they don’t move.
How do you wash a cyanotype scarf?
Rarely, by hand, in cold water and with a phosphate-free detergent, as Jacquard recommends for cyanotypes on fabric. A scarf touches your neck, and the manufacturer warns that sweat and skin oils can fade the image: the less you wash it and the less you wear it directly against your skin, the more of its blue it will keep.
Your next step
Sources
- Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 1234
- Bilvar, H. (2025). Fotoğraf ve tekstilin kesişiminde siyanotip (cyanotype) baskı: Gelenekten geleceğe tekstil ve sanattaki rolü [Cyanotype printing at the intersection of photography and textiles: Its role in textiles and art, from tradition to the future]. Bodrum Journal of Art and Design, 4(1), 94–108. https://doi.org/10.58850/bodrum.1603461
- Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 123456789
- Jacquard Products. (2015). Cyanotype tips and troubleshooting [Manufacturer document, version 6.01.15]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Tips_and_Troubleshooting.pdf Accessed October 16, 2026. 123
- Franchi, S. (2024). Crafting and collecting cyanotypes: Anna Atkins's Photographs of British Algae: Cyanotype Impressions. Literature Compass, 21(1-3), Article e12708. https://doi.org/10.1111/lic3.12708
- Ilford Photo. (2017, March 30). Making a black & white print: Exposure testing. https://www.ilfordphoto.com/exposure-testing/ Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.