Hydrogen peroxide in cyanotype: what it does and how much to use
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- Hydrogen peroxide brings out the print’s final blue sooner; Ware notes that it doesn’t change its dry density.
- Ware uses a 0.3% bath for half a minute at most.
- With 3% drugstore hydrogen peroxide, that works out to about 100 ml per liter of water (our calculation).
- Sources disagree: the Science and Media Museum gives a 3% bath, and Jacquard, a single drop.
- Without it, air does the same in about 24 hours.
- It never goes in the powders or the solution: ferricyanide is incompatible with strong oxidizers.
On this page (6 sections)
What is hydrogen peroxide used for in cyanotype?#
In cyanotype, hydrogen peroxide is used to bring out the print’s final blue sooner. The shadows come out of the wash paler and the air oxidizes them little by little; a short bath does that work in seconds. According to Mike Ware, the final result in the dry print is the same1.
Without hydrogen peroxide, the blue arrives anyway. Ware estimates about 24 hours for the shadows to regain their density as they dry, through oxidation by the air2, and Jacquard gives the same time for its chemistry3. Hydrogen peroxide is therefore a shortcut: useful for judging a test strip on the spot or for seeing the results of a session before you clean up.
It’s an optional step in developing a cyanotype, which is part of the full process of how to make a cyanotype. Ware says it plainly for the classic formula: the bath doesn’t change the final densities of the dry print4.
How much hydrogen peroxide do you use?#
Mike Ware uses a 0.3% hydrogen peroxide bath for half a minute at most, and makes it with 50 ml of 6% hydrogen peroxide in a liter of water1. His is the only source that gives concentration, dilution and time together, and that’s why we follow it.
The one we recommend is 3% drugstore hydrogen peroxide. Ware refers to 6% as “20 volume”5; with 3%, you need twice as much product to reach the same bath concentration. Always check the percentage on your bottle’s label.
| Hydrogen peroxide you have | Amount per liter of water | Bath concentration |
|---|---|---|
| 6% (“20 volume”) | 50 ml, as Ware uses1 | 0.3 % |
| 3% (the usual drugstore strength) | About 100 ml (our calculation) | 0.3 % |
In his Simple Cyanotype, Ware adds it straight to the first wash bath, with the same 50 ml of 6% hydrogen peroxide per liter, if you want to see the density right away5. In that case, the hydrogen peroxide bath is also the one that takes up the chemistry the print releases, and it goes with the rest of the first bath into the container for the hazardous waste collection point.
Why don’t the doses going around agree?#
Hydrogen peroxide doses don’t agree because each source describes a different use and some give no figures. Ware uses a 0.3% bath, half a minute at most; the National Science and Media Museum mentions a 3% bath; and Jacquard, a drop in the final rinse2,6,7.
| What you’ll hear | What the sources say | Source |
|---|---|---|
| A few drops | Jacquard: a drop of hydrogen peroxide in the final rinse, no concentration given | 7 |
| A generous splash | Ware: a 0.3% bath (50 ml of 6% per liter), 30 s at most; the Science and Media Museum mentions a 3% bath | 1,6 |
| Not needed | True: air gives the same blue in about 24 hours; the bath only brings it out sooner | 2,4 |
| It intensifies the blue | Ware: it doesn’t change the final result; a Rijksmuseum article describes it as an optional bath that intensifies the image, and Jacquard, as a remedy for faded prints | 1,8,9 |
All three agree on what it does: hydrogen peroxide speeds up the oxidation of the pigment. The difference lies in how much and in how the result is described. We prefer Ware’s dose because it’s the only one that gives concentration, dilution and time, and because its author explains what the bath does and doesn’t do.
Does it intensify the blue or just bring it out sooner?#
Hydrogen peroxide brings out the blue sooner, but it doesn’t give a deeper blue than air-drying would. Ware states this for the classic formula: the bath doesn’t change the final densities of the dry print4. If the print looks more intense after the bath, that’s the blue it would have had anyway a day later.
Hydrogen peroxide fixes the image
To get a deeper blue you have to act earlier: in the exposure, the paper or the wash. Those approaches, with their sources, are in how to get a more intense blue in cyanotype.
Can it revive a faded cyanotype?#
For a print faded by light, the first remedy is darkness. Light reduces Prussian blue to Prussian white, which is colorless, and in the dark the air oxidizes it back11. In Ware’s tests, a faded print recovered at least 95% of its density in a day11.
Jacquard, for its part, says that a dilute hydrogen peroxide bath usually restores a faded print’s original intensity9. That may work for a recent print of your own. With an old cyanotype, on the other hand, don’t wet it: Ware advises against even a plain water wash, because of the risk of losing image11.
How to use it safely#
Hydrogen peroxide is always used diluted in the bath water and never near the eyes. Chemos’s safety data sheet for 3% hydrogen peroxide labels it as an eye irritant12. The limits in that same sheet reserve that classification for the 5 to 8% range, and the classification for serious eye damage for 8% and above12. That’s why we use drugstore strength and not higher concentrations.
Safety: Use only 3% drugstore hydrogen peroxide, added to the bath water, and keep it away from your eyes. More on safety
Don’t mix it with the cyanotype chemistry. The Thermo Fisher and Honeywell sheets list potassium ferricyanide as incompatible with strong oxidizers and with acids13,14. That’s why hydrogen peroxide never goes into the powders or the sensitizer solution. Its place is the tray, with the print already exposed.
We haven’t found reliable data on what to do with a very dilute hydrogen peroxide bath, and the Chemos sheet says not to pour the product down the drain12. If you add it to the first bath, that bath goes into the container for the hazardous waste collection point, as we recommend for every first bath15. The rest of what you need to know about handling and storing chemicals is in safety with cyanotype chemicals.
Frequently asked questions
Can you use drugstore hydrogen peroxide?
Yes, the 3% kind, which is the one we recommend; check the percentage on the label. To reach the 0.3% Mike Ware uses, dilute about 100 ml in each liter of bath water, by our calculation. Pour it into the water in the tray, not directly onto the print, and keep your glasses on while you handle it.
How long should the print stay in the hydrogen peroxide?
Not long. Ware leaves it for half a minute at most in a 0.3% bath. The color change is visible right away, so there’s no need for more. Afterward, the print goes back into clean water or finishes its wash, and dries in the shade like any other cyanotype.
Do you have to use hydrogen peroxide?
No. It’s a shortcut to see the final blue sooner. Without it, the shadows regain their blue as they dry, through oxidation by the air, in about 24 hours according to Ware, and Jacquard gives the same time for its chemistry. The final result is the same, so it’s a matter of how much of a hurry you’re in.
Can I add hydrogen peroxide to the sensitizer solution?
No. The Thermo Fisher and Honeywell safety data sheets list potassium ferricyanide as incompatible with strong oxidizers, and hydrogen peroxide is an oxidizer. That’s why it is only used diluted in the wash water, never in the powders or in the solution you brush onto the paper.
Your next step
Sources
- Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026. 123456
- Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026. 123
- Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026.
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026. 123
- Ware, M. (2022). Alternative photographic processes: Simple Cyanotype [PDF instructions]. https://mikeware.co.uk/downloads/SimpleCy22.pdf Accessed October 16, 2026. 12
- National Science and Media Museum. (2011, February 18). Introduction to the cyanotype process. National Science and Media Museum Blog. https://blog.scienceandmediamuseum.org.uk/introduction-cyanotype-process/ Accessed October 17, 2026. 12
- Jacquard Products. (n.d.). Cyanotype [Cyanotype Kit instruction booklet]. https://jacquardproducts.com/s/Cyanotype-Kit-INSTRUCTION-BOOKLET.pdf Accessed October 17, 2026. 12
- Tirak, L. M. (2021). Black and blue: Revelations in Harold Mahoney's X-rayed anatomical sections. The Rijksmuseum Bulletin, 69(1), 27–49. https://doi.org/10.52476/trb.9603
- Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 12
- Image Permanence Institute. (n.d.). Cyanotype. Graphics Atlas. Rochester Institute of Technology. https://new.graphicsatlas.org/cyanotype Accessed October 17, 2026.
- Ware, M. (2003). A blueprint for conserving cyanotypes. Topics in Photographic Preservation, 10, 2-18. https://resources.culturalheritage.org/pmgtopics/2003-volume-ten/10_02_Ware.pdf 123
- Chemos GmbH & Co. KG. (2024). Ficha de datos de seguridad: Hydrogen peroxide solution 3% (GHS version 1.0, art. A0272345). https://www.chemos.de/import/data/msds/GB_en/7722-84-1-A0272345-GB-en.pdf. Accessed October 16, 2026. 123
- Thermo Fisher (Kandel) GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (revision 5, ref. A16946). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/potassium-hexacyanoferrate-iii-fisher-scientific.pdf. Accessed October 16, 2026.
- Honeywell Specialty Chemicals Seelze GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 2.4, ref. 31253). https://pdf.dutscher.com/doc/31253-1KG-HON/31253-1KG-HON_FDSen.pdf. Accessed October 16, 2026.
- Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.