Skip to content
The Cyano Codex
Choose language
Large-format cyanotype of ferns and palm fronds hanging in a studio, with a person seen from behind
Plate 1A mural-size piece, at human scale.

The Journal: The Cyano Codex blog · No. 7

Large-format cyanotype: planning a mural-size piece

A door-size cyanotype uses the same chemistry as a postcard, but almost everything else changes: the support, the amount of solution, how you get it into the light and how you wash it. Documented large-format works point to the decisions worth making before you wet the first meter of fabric.
Published
Reviewed
Reading time
7 min
Sources
14

As an Amazon Associate I earn from qualifying purchases. How we fund the site

In short

  • In 2015, fifty students from a high school in Elche made a 12 × 6 m cyanotype with an artist.
  • For A3 paper or larger, Ware recommends 240 g/m² or more; for fabric, natural fibers only.
  • Jacquard’s mixed sensitizer lasts 2 to 4 hours: for large pieces, it’s best to mix it in batches.
On this page (8 sections)
  1. What changes when cyanotype moves to the wall?
  2. From the full body to a 90-meter wall
  3. One piece or many: the first decision
  4. The support: large paper or fabric
  5. How much solution do you need?
  6. Exposing a large surface
  7. Washing what won’t fit in a tray
  8. Large, and better as a group

What changes when cyanotype moves to the wall?#

When it moves to the wall, cyanotype keeps its chemistry and changes everything else. You have to choose a support that can stand getting wet at that size, prepare enough solution without it going off, get a huge surface into the light all at once, and wash something that won’t fit in any tray. Each of those decisions is made before you start.

This isn’t new territory. Large-format works have been documented since the mid-20th century, and some solved these problems in very different ways. They’re worth a look before you plan your own.

From the full body to a 90-meter wall#

Around 1950, Robert Rauschenberg and Susan Weil made life-size cyanotypes with the silhouettes of their own bodies on large sheets of sensitized paper. In 1951 they were shown in New York, in shop windows and in a group show at MoMA1,2. It was the simplest way to make a large piece: lie down on the paper.

Some documented large-format cyanotypes
Work Size How it was made Source
Rauschenberg and Weil, c. 1950 Life-size Silhouettes of their bodies on sensitized paper 1
Walead Beshty, Barbican, London, 2014 A 90 m wall 12,000 cyanotype photograms 1
Revela-T, Vilassar de Dalt, 2015 7.5 × 15 m Isaza Martínez, Pantoja and King; presented as the world’s largest 1
Thielemann and students from the Carrús high school, Elche, 2015 12 × 6 m Collective piece with 50 students 1
Stefanos Tsakiris, Thessaloniki, 2017 276.64 m² Guinness World Record for the largest cyanotype 3

The table shows two approaches. Walead Beshty didn’t make one enormous piece but 12,000 photograms that covered a 90-meter wall in the Barbican’s Curve Gallery1. In 2015 the Revela-T festival showed a single 7.5 × 15 m piece, presented at the time as the largest in the world1; the record recognized by Guinness came later, in 2017, with 276.64 m² in the port of Thessaloniki3.

One piece or many: the first decision#

The decision that shapes all the others is whether the work will be a single surface or a set of pieces. A modular mural, like Beshty’s, is made with the usual materials, frames and trays, and any failed print can be redone without scrapping the whole thing. A single piece, like the Revela-T one, gives a continuous image, but forces you to solve coating, exposure and washing on a large scale.

Between the two extremes there’s room for in-between solutions: strips sewn together or hung side by side, panels that fit together, an image spread across several pieces of fabric. Drawing the piece to scale beforehand, with its divisions, saves surprises in the water.

The support: large paper or fabric#

With paper, weight is what matters. Mike Ware considers 160 g/m² paper enough up to A4 size, but for A3 or larger he recommends 240 g/m² or more, so it doesn’t cockle or buckle when wet4. For large algae, Redden and Crawford used wallpaper lining paper with the solution diluted by half, with a somewhat paler result and prints up to 154 × 53 cm5.

With fabric, fiber is the rule. Jacquard accepts any natural surface for its sensitizer, such as cotton, linen, silk, hemp or canvas6, and explains that polyester, not being a natural fiber, generally doesn’t work6. Mural-size pretreated cyanotype fabric is also sold, but in our October 2026 review we couldn’t confirm its specifications on a sheet from the manufacturer itself, so we don’t give them. Fabric types and how to choose them are covered in fabric for cyanotype.

How much solution do you need?#

The amount of solution you need depends on the surface area and the support, and fabric uses more than paper. With a glass rod, Ware estimates about 1.5 ml for a 20.3 × 25.4 cm print on paper, and up to twice that with a brush7. According to the manufacturer, the Jacquard set makes about 65 prints of that size on paper and about 50 on fabric8.

For a mural, it’s best to work out the amount with the cyanotype Sensitizer Calculator and add a margin, because running short halfway across the fabric leaves a visible line. Time matters too: Jacquard states that its mix of the two solutions is stable for only 2 to 4 hours, so you mix only what you’re going to use9. For a large piece, that means mixing in batches.

Fabric can be brushed with or dipped in the sensitizer and left to air-dry in the dark9. For a large piece, dipping means having a container the fabric fits in; brushing means planning the sections.

Safety: Coat the fabric wearing nitrile gloves and old clothes: the solution stains skin and textiles. More on safety

Exposing a large surface#

Exposing a large piece is the step that leaves the least room for improvisation, because the whole surface has to receive the light at the same time and for the same length of time. Published times vary widely, depending on the formula, the light, the support and its batch, the humidity and, in the sun, the time of day, the season and the clouds10,11. Before exposing the piece, make a test strip with the same fabric and the same batch of solution.

Jacquard gives 1 to 30 minutes in the sun for its chemicals, depending on conditions, and prefers overexposing to underexposing; well-exposed fabric looks bronze and turns blue when wet9. That bronze is the sign to look for across the whole surface, from one edge to the other. How to read the time is covered in cyanotype exposure time.

Planning the exposure is, above all, answering three questions in advance. How you’ll get the coated piece to the light without it being exposed too early. How you’ll keep the objects or the negative in contact across the whole surface. And how you’ll pull it out all at once when the bronze appears.

Washing what won’t fit in a tray#

Washing a large piece calls for space and water, not different chemistry. Jacquard says to rinse for at least 5 minutes, changing the water, until it runs clear; without hydrogen peroxide, the blue reaches its final tone as it oxidizes, in about 24 hours9. The water shouldn’t be alkaline, with a pH above 7, or hard, with calcium salts12: an alkaline medium makes the blue lose detail and density13.

Safety: Keep leftover solution and the first wash bath in a closed, labeled container for your local hazardous waste collection point; later rinses can go down the drain with plenty of water. More on safety

With fabric several meters long, the first bath carries off a lot of unreacted solution, and you need to plan for it: where it’s collected, in what container and how it’s then taken to the waste collection point. Once finished, the piece is washed as little as possible, by hand, in cold water and with phosphate-free detergent, because phosphates and alkaline conditions can yellow the image6.

Large, and better as a group#

Many of the documented large pieces are collective. In Elche, the artist Reinaldo Thielemann made his with 50 students from the Carrús high school, as part of his Blue & White project1, and in the Aguascalientes workshops a whole group ended up with a large-format cyanotype made together14.

It makes sense: a mural-size piece needs hands to spread out the fabric, to cover and uncover it all at once and to carry it to the water. The basic technique, at the scale of a garment or a cushion, is in cyanotype on fabric, step by step. More works and artists are in cyanotype and contemporary art, and more posts in The Journal.

More from the Journal

Your next step

Learn the basic technique: cyanotype on fabric, step by stepWhich fabric to use, how to prepare it, how much solution it takes, how long to expose it in the sun, how to rinse it and how to wash the garment without losing the blue.

Sources

  1. Gil-Segovia, J. A. (2022). La cianotipia como recurso en el arte contemporáneo: una luz azul que no se apaga. Arte, Individuo y Sociedad, 34(1), 167-186. https://doi.org/10.5209/aris.73063 Cited on: p. 169, pp. 169-170. 12345678
  2. Reinhuber, E. E. (2022). National flowers in blue: Reinvigorating analog imaging techniques in the era of big data and pixel perfection. In Proceedings of EVA London 2022 (pp. 46-50). BCS Learning & Development. https://doi.org/10.14236/ewic/EVA2022.10
  3. Guinness World Records. (n.d.). Largest cyanotype photograph. https://www.guinnessworldrecords.com/world-records/largest-cyanotype-photograph/ Accessed October 17, 2026. 12
  4. Ware, M. (2009). New Cyanotype: Siderotype workshop notes. https://www.mikeware.co.uk/downloads/CyanoWork.pdf Accessed October 17, 2026.
  5. Redden, H. and Crawford, A. (2025). Anna Atkins and the making of macroalgae cyanotypes and their role in science education. Applied Phycology, 6(1), 1-8. https://doi.org/10.1080/26388081.2024.2435049
  6. Jacquard Products. (2019). Cyanotype FAQs [Manufacturer’s document, version 02.08.19]. https://cdn.shopify.com/s/files/1/2714/2506/files/Cyanotype-FAQs.pdf Accessed October 17, 2026. 123
  7. Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
  8. Jacquard Products. (n.d.). Cyanotype sensitizer set [Product page]. https://www.jacquardproducts.com/cyanotype-set Accessed October 16, 2026.
  9. Jacquard Products. (2021). Cyanotype detailed instructions [Manufacturer’s instructions, version 08.17.21]. https://cdn.shopify.com/s/files/1/0053/5540/5423/files/Cyanotype_Instructions.pdf Accessed October 16, 2026. 1234
  10. Jacquard Products. (n.d.). Cyanotype fabric sheets [Product page]. https://www.jacquardproducts.com/cyanotype-fabric-sheets Accessed October 16, 2026.
  11. Ware, M. (n.d.). The New Cyanotype process. Mike Ware: Alternative photography. https://www.mikeware.co.uk/mikeware/New_Cyanotype_Process.html Accessed October 16, 2026.
  12. Ware, M. (2022). Alternative photographic processes: Simple Cyanotype [PDF instructions]. https://mikeware.co.uk/downloads/SimpleCy22.pdf Accessed October 16, 2026.
  13. Vogt-O'Connor, D. (1995). Caring for blueprints and cyanotypes (Conserve O Gram 19/9). National Park Service, Curatorial Services Division. https://www.nps.gov/subjects/museums/upload/19-09_508.pdf Accessed October 16, 2026.
  14. Mendez, A. and Lopez-Leon, R. (2023). Creativity and cyanotype: Exploring camera-less photography as an alternative for art education. Arts & Communication, 1(2), Article 1453. https://doi.org/10.36922/ac.1453

Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.