The Journal: The Cyano Codex blog · No. 9
How to read a safety data sheet (and why we cite them)
- Section
- The Journal
- Published
- Reviewed
- Reading time
- 9 min
- Sources
- 12
As an Amazon Associate I earn from qualifying purchases. How we fund the site
In short
- The safety data sheet has 16 fixed sections, from the product name to the regulatory information.
- Section 2 sums up the hazards: pictograms, signal word and H, P and EUH statements.
- Sheets for the same reagent don’t always agree; this site follows the most cautious one and says so.
On this page (6 sections)
What is a safety data sheet?#
A safety data sheet is the document that the manufacturer of a chemical product makes available to whoever uses it. Its purpose is to let them take the measures needed to protect health, safety at work and the environment1. In the European Union it has 16 fixed sections, always in the same order1.
It’s also known by its initials: FDS in Spanish and SDS in English. It isn’t a marketing leaflet or an expanded label. It’s a technical document, with a structure set out in Annex II of the REACH Regulation1, which is why two sheets from different manufacturers can be compared section by section.
The 16 sections, with cyanotype examples#
Each section answers a question. The table runs through all 16 with their contents and, where there is one, a real example taken from the sheets for the cyanotype reagents this site cites. Where there’s no example, it’s because no page on the site needs one.
| Section | What it covers | Example from the cyanotype sheets | Source |
|---|---|---|---|
| 1. Identification | Product name, identification numbers and manufacturer | Potassium ferricyanide is potassium hexacyanoferrate(III), K₃[Fe(CN)₆], CAS 13746-66-2 | 2 |
| 2. Hazards | Classification and label elements | Eye irritant (H319), toxic to aquatic life (H411), EUH032 and the signal word “Warning” | 2 |
| 3. Composition | What a mixture contains and in what proportion | A commercial New Cyanotype–type sensitizer declares less than 30% ferric ammonium oxalate | 3 |
| 4. First aid | What to do in case of contact or ingestion | Eyes: rinse with plenty of water for at least 15 minutes and see a doctor | 4 |
| 5. Fire | How to put it out and what gases it can give off | — | — |
| 6. Accidental release | How to clean up a spill | Collect the powder dry, without raising dust, and cover drains | 5 |
| 7. Handling and storage | How to use and store it | Tightly closed, dry, kept apart from acids and away from food | 6 |
| 8. Personal protection | What equipment to use | Goggles conforming to EN 166 and 0.11 mm nitrile gloves | 5 |
| 9. Properties | Appearance, solubility and other physical data | Decomposes above 300 °C | 6 |
| 10. Stability and reactivity | What it shouldn’t be mixed with | Incompatible with strong oxidizers and with acids | 4 |
| 11. Toxicology | Health effects and test values | Oral LD50 in rats above 5,110 mg/kg | 5 |
| 12. Ecology | Effects on water and soil | Aquatic toxicity data that differ from sheet to sheet; algae are the most sensitive organism | 2 |
| 13. Disposal | What to do with leftovers | Hazardous waste: not to be poured down the drain | 4 |
| 14. Transport | How it is transported | — | — |
| 15. Regulations | Rules that apply to it | German water hazard classes (WGK) for the citrate that differ by manufacturer | 7 |
| 16. Other information | Revisions, abbreviations and notes | — | — |
The table also says something about this site: almost everything we say about hazards comes from sections 2, 4, 7, 8, 10 and 13. That’s what you need to know before opening a bottle, while you work and when you clean up.
Section 2, the one people read most#
Section 2 sets out the product’s classification under the CLP Regulation, the European regulation on classification and labeling, and, at a minimum, the label elements: pictograms, signal words, hazard statements and precautionary statements1. It’s the one people consult most because it sums up the whole document in a few lines.
The codes look cryptic, but each one corresponds to a fixed phrase. In the Sigma-Aldrich ferricyanide sheet served in Spanish, H319 is “Causes serious eye irritation” and H411, “Toxic to aquatic life with long lasting effects”5. H statements describe the hazard, and P statements are the precautionary statements: the Honeywell sheet, for example, lists six, from P264 to P5012.
Then there are the EUH statements, the supplementary hazard statements. The one that matters for cyanotype is EUH032: in contact with acids, ferricyanide releases very toxic gas2,6. That’s why Thermo Fisher and Honeywell list it as incompatible with acids in section 104,2. On the Honeywell and Thermo Fisher sheets, the signal word is “Warning”2,4.
Why don’t two sheets for the same reagent agree?#
Two sheets for the same reagent don’t agree because each manufacturer assesses and writes its own, within its own regulatory framework and at its own date. For ferricyanide, Honeywell and Thermo Fisher declare eye irritation and aquatic toxicity, Carl Roth doesn’t classify it except for EUH032, and PanReac assigns it no statement at all2,4,6,8.
The framework changes what you read. The Jacquard sheet covering the ferricyanide in its two-bottle set follows the US system and declares it “not hazardous,” although it includes the warning about acids9. The Sigma-Aldrich sheet served on its Spanish website is actually the US version5. The same thing happens with the citrate: Thermo Fisher doesn’t classify it, and Jacquard lists it as a skin, eye and respiratory irritant7,10.
Is there a harmonized European classification for these reagents that settles the question? We haven’t been able to check, so we neither claim nor deny it. The practical consequence, and this site’s decision, is to follow the most cautious version: if one sheet declares a hazard, you work as if it were there. The reagent-by-reagent detail is in is cyanotype toxic?.
How to read a sheet in five minutes#
You don’t need to read all sixteen sections to work safely. With these six checks, in this order, you get almost everything that matters in a cyanotype studio:
- The date. It must appear on the first page1. A sheet from years ago may have changed.
- Section 1. Check the name and the CAS number: potassium ferricyanide is 13746-66-22. If it says “ferrocyanide,” it’s a different compound, which doesn’t work for the classic formula11.
- Section 2. Read the H statements and the EUH; they tell you what the risk is and what not to mix it with.
- Sections 7 and 8. How to store it and what to protect yourself with when you use it.
- Section 4. What to do if something goes wrong, before it happens.
- Section 13. What to do with the leftover product.
If the sheet you find is the international ICSC, it’s worth knowing that it’s a different, shorter document: the one for ferricyanide, from 2002, describes it as slightly irritating to the eyes, skin and respiratory tract12. It’s useful for comparison, not as a substitute for the manufacturer’s sheet.
Why this site cites safety data sheets#
This site cites safety data sheets because they’re the most direct source on the hazards of a specific product: they’re written by whoever makes it, they follow a legal structure and they can be checked. In the order of reliability we follow, they come right after peer-reviewed scientific papers and before official agencies and museums.
That’s why every safety fact on the site has its sheet cited at the bottom of the page, with the date of the version we read. And that’s why we don’t repeat reassuring phrases from packaging or tutorials that the sheets don’t back up. How we work with sources is explained in methodology, and how to apply all this at the workbench, in cyanotype reagents: handling and storage. More posts are in The Journal.
More from the Journal
- No. 20Rauschenberg and Weil: full-body cyanotypes around 1950How Robert Rauschenberg and Susan Weil made their full-body cyanotypes around 1950, where they were shown in 1951 and which museums hold them today.
- No. 19Meghann Riepenhoff: cyanotypes made with waves, salt and sandHow Meghann Riepenhoff makes her Littoral Drift cyanotypes with waves, salt and sand, why they change with light and which museums show them.
Your next step
Sources
- European Commission. (2020). Reglamento (UE) 2020/878 de la Comisión, de 18 de junio de 2020, por el que se modifica el anexo II del Reglamento (CE) n.º 1907/2006 del Parlamento Europeo y del Consejo, relativo al registro, la evaluación, la autorización y la restricción de las sustancias y mezclas químicas (REACH). Diario Oficial de la Unión Europea. https://eur-lex.europa.eu/eli/reg/2020/878/oj/spa Accessed October 17, 2026. 12345
- Honeywell Specialty Chemicals Seelze GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 2.4, ref. 31253). https://pdf.dutscher.com/doc/31253-1KG-HON/31253-1KG-HON_FDSen.pdf. Accessed October 16, 2026. 123456789
- Jay House Ltd. (2017). Safety data sheet: Cyanotype Sensitiser (version 2, Fotospeed brand). https://www.freestylephoto.com/static/pdf/msds/fotospeed/308510_SDS.pdf. Accessed October 16, 2026.
- Thermo Fisher (Kandel) GmbH. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (revision 5, ref. A16946). https://deca.upc.edu/en/laboratories/latem/security/reactius-quimics/potassium-hexacyanoferrate-iii-fisher-scientific.pdf. Accessed October 16, 2026. 123456
- Sigma-Aldrich. (2026). Ficha de datos de seguridad: Hexacianoferrato(III) de potasio (version 11.0, ref. 244023). https://www.sigmaaldrich.com/ES/es/sds/sigald/244023. Accessed October 16, 2026. 12345
- Carl Roth GmbH + Co. KG. (2020). Safety data sheet: Kaliumhexacyanoferrat(III) (version 3.0, art. 7971) [in German]. https://www.gm.th-koeln.de/~werkst/sicherheit/sicherheitsdatenblatt/kaliumhexacyanoferrat_III_2020_06_15.pdf. Accessed October 16, 2026. 1234
- Thermo Fisher Scientific. (2025). Safety data sheet: Ammonium iron(III) citrate (revision 6, ref. 211840000). https://www.fishersci.ie/store/msds?partNumber=10762505&productDescription%3D250GR+Ammonium+iron%28III%29+citrate%2C+16.5+to+18.5%25+Fe&countryCode=IE&language=en. Accessed October 16, 2026. 12
- Panreac Química S.L.U. (2025). Safety data sheet: Potassium hexacyanoferrate(III) (version 8.03, art. 1503). https://shop.lgsbv.com/H365/DWN/sds_131503_en.pdf. Accessed October 16, 2026.
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Potassium ferricyanide (CHM0101, CHM1101, CHM2101, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/potassium-ferricyanide_2018-02-28.pdf. Accessed October 16, 2026.
- Rupert, Gibbon & Spider, Inc. (2018). Safety data sheet: Ferric ammonium citrate (CHM1102, CHM2102, JCY1100). https://uwaterloo.ca/fine-arts/sites/default/files/uploads/documents/ferric-ammonium-citrate_2018-02-07.pdf. Accessed October 16, 2026.
- Ware, M. (n.d.). The traditional cyanotype process. Mike Ware: Alternative photography. https://mikeware.co.uk/mikeware/Traditional_Cyanotype.html Accessed October 16, 2026.
- International Programme on Chemical Safety (IPCS) and European Commission. (2002). ICSC 1132: Potassium ferricyanide [International Chemical Safety Card]. https://www.inchem.org/documents/icsc/icsc/eics1132.htm Accessed October 16, 2026.
Reviewed on October 16, 2026. If you spot an error or a missing source, write to us and we’ll look into it.